journal article·2023-12

MnNCN@C nanocomposite as an anode for Li-ion battery

S. Pradhan, N.S. Anuraag, S.K. Shaw, A. Gangwar, K. Sandeep Rao, A. Sharma, B.P. Mandal, N.K. Prasad

Publisher page

Abstract

In order to find other anode materials for lithium-ion batteries, manganese carbodiimide with N-doped C coating (MnNCN@C) has been reported. Initially a gel of precursors was prepared and then calcined for 1.5 h at 700 °C in the atmosphere of N 2 . The MnNCN phase was identified by X-ray diffraction, X-ray Photoelectron Spectroscopy (XPS) and electron diffraction. Further, carbon phase was established by transmission electron microscopy (TEM), FTIR and Raman spectroscopy. The doping of N in carbon phase was confirmed from XPS study. Distribution of pore size as well as specific surface area of MnNCN@C composites were investigated from the BET technique, and their values were 9.19 × 10 3cm 2/g and 7.512 nm, respectively. The cell with this material as anode could be cycled for 100 times. After 100 cycles, the capacity turns out to be around 200 mAh/g. However, the cell was capable to deliver suitable capacity at even higher currents.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Inorganic Chemistry and Materials · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. A review of advanced and practical lithium battery materials10.1039/c0jm04225k ↗
2. Lithium-ion batteries: outlook on present, future, and hybridized technologies10.1039/C8TA10513H ↗
3. An outlook on lithium ion battery technology10.1021/acscentsci.7b00288 ↗
4. Role of graphene-based nanocomposites as anode material for Lithium-ion batteries10.1016/j.mseb.2022.116141 ↗
5. Nanocomposite of (α-Mn3O4/MnO)@rGO as a high performance electrode material for supercapacitors10.1016/j.electacta.2021.138823 ↗
6. Graphene and lithium-based battery electrodes: A review of recent literature10.3390/en13184867 ↗
7. Leveraging valuable synergies by combining alloying and conversion for lithium-ion anodes10.1039/C6EE02346K ↗
8. A high rate and long-cycle-life anode based on micrometer-sized Pb powder for sodium-ion batteries10.1016/j.jallcom.2021.161240 ↗
9. Insights into Enhanced Capacitive Behavior of Carbon Cathode for Lithium Ion Capacitors: The Coupling of Pore Size and Graphitization Engineering
10. Molecularly Compensated Pre-Metallation Strategy for Metal-Ion Batteries and Capacitors10.1002/anie.202103569 ↗
11. 3D Fe 3 O 4 nanocrystals decorating carbon nanotubes to tune electromagnetic properties and enhance microwave absorption capacity10.1039/C5TA02782A ↗
12. Interconnected core–shell MoO 2 microcapsules with nanorod-assembled shells as high-performance lithium-ion battery anodes10.1039/c2jm30862b ↗
13. Di-: Tert -butyltin(iv) 2-pyridyl and 4,6-dimethyl-2-pyrimidyl thiolates: Versatile single source precursors for the preparation of SnS nanoplatelets as anode material for lithium ion batteries10.1039/D1DT01142A ↗
14. Dimethyltin(iv)-4,6-dimethyl-2-pyridylselenolate: an efficient single source precursor for the preparation of SnSe nanosheets as anode material for lithium ion batteries10.1039/D1DT01312B ↗
15. Binder strategy towards improving the rate performance of nanosheet-assembled SnO 2 hollow microspheres10.1039/c2ra21867d ↗
16. Advances in manganese-oxide ‘composite’electrodes for lithium-ion batteries10.1039/b417616m ↗
17. Scalable fabrication of nanostructured tin oxide anodes for high-energy lithium-ion batteries10.1021/acsami.8b07981 ↗
18. Carbodiimides: New materials applied as anode electrodes for sodium and lithium ion batteries10.1039/C5TA08945J ↗
19. Structural and electrochemical performance studies for nanocomposites of carbon with Fe3C or Mn-Substituted (Fe3C/Fe3O4) as anodes for Li-batteries10.1016/j.apsusc.2020.147474 ↗
20. Arayamparambil · 2019
21. Electronic band gap reduction in manganese carbodiimide: MnNCN10.1021/jp4000768 ↗
22. Synthesis, crystal structure, and properties of MnNCN, the first carbodiimide of a magnetic transition metal10.1021/ic050050a ↗
23. Carbodiimides as energy materials: Which directions for a reasonable future?10.1039/C8DT01846D ↗
24. Exploiting High-Performance Anode through Tuning the Character of Chemical Bonds for Li-Ion Batteries and Capacitors10.1002/aenm.201601127 ↗
25. Transition-Metal Carbodiimides as Molecular Negative Electrode Materials for Lithium- and Sodium-Ion Batteries with Excellent Cycling Properties10.1002/ange.201600098 ↗
26. Isotropic negative thermal expansion in β-Si(NCN) 2 and its origin10.1021/jp2106583 ↗
27. Electrochemical performance of CuNCN for sodium ion batteries and comparison with ZnNCN and lithium ion batteries10.1016/j.jpowsour.2017.09.033 ↗
28. Electrochemical Evaluation of Pb, Ag, and Zn Cyanamides/Carbodiimides10.1021/acsomega.8b02748 ↗
29. Metal cyanamides: Open-framework structure and energy conversion/storage applications10.1016/j.jechem.2021.01.006 ↗
30. Nonaqueous liquid-phase synthesis of nanocrystalline metal carbodiimides. A proof of concept for copper and manganese carbodiimides10.1039/b909131a ↗
31. Structural and in-vitro assessment of ZnxFe3−xC (0 ≤ x ≤ 1) nanoparticles as magnetic biomaterials10.1016/j.apsusc.2019.144891 ↗
32. Determination of the magnetic structure of manganese carbodiimide with diffraction experiments using polarized neutrons10.1103/PhysRevB.80.024117 ↗
33. Electronic structure of Mn-doped CaCu3Ti4O12: An XPS, ESR and NEXAFS study10.1016/j.ceramint.2020.12.136 ↗
34. Ferrimagnetic (α-Mn3O4/MnO)@rGO nanocomposite as potential adsorbent for organic pollutant dye10.1016/j.apsusc.2022.155778 ↗
35. Interpretation of XPS Mn(2p) spectra of Mn oxyhydroxides and constraints on the mechanism of MnO 2 precipitation10.2138/am-1998-3-414 ↗
36. Manganese Carbodiimide Nanoparticles Modified with N-Doping Carbon: A Bifunctional Cathode Electrocatalyst for Aprotic Li-O2 Battery10.1021/acssuschemeng.9b04674 ↗
37. The potential of manganese nitride based materials as nitrogen transfer reagents for nitrogen chemical looping10.1016/j.apcatb.2017.04.073 ↗
38. Carburization of Manganese Oxide Sources by Natural Gas, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing
39. A new tilt and an old twist on the nickel arsenide structure-type: Synthesis and characterisation of the quaternary transition-metal cyanamides A2MnSn2(NCN)6 (A = Li and Na)10.1039/C9DT03062J ↗
40. Monitoring surface transformations of metal carbodiimide water oxidation catalysts by operando XAS and Raman spectroscopy10.1039/C8DT01587B ↗
41. Local Lattice Distortions in Mn[N(CN)2]2 under Pressure10.1021/acs.inorgchem.5b01870 ↗
42. Experimental methods in chemical engineering: specific surface area and pore size distribution measurements—BET, BJH, and DFT10.1002/cjce.23632 ↗
43. A simple synthesis of MnN0.43@C nanocomposite: characterization and application as battery material10.1007/s11051-014-2795-2 ↗
44. Tubular graphene-supported nanoparticulate manganese carbodiimide as a free-standing high-energy and high-rate anode for lithium ion batteries10.1016/j.jpowsour.2020.228252 ↗
45. Improved Li storage performance of SnO nanodisc on SnO2quantum dots embedded carbon matrix10.1088/1361-6528/ac67ad ↗