Preparation of a hierarchical 3D structure composed of Co-doped SnO2 nanosheets with excellent gas sensitivity to acetic acid
Source abstract
Abstract
In this article, we used a simple one-step hydrothermal method to successfully synthesize Co-doped SnO 2 and tested its gas sensitivity performance. The material was characterized by a variety of technical methods. The results show that the prepared material is a flower-like hierarchical structure assembled by porous nanosheets, and the thickness of the nanosheets is about 20 nm. Materials with different doping ratios were tested for gas sensitivity. The results show that the material with a doping ratio of 3 mol% exhibits an excellent gas-sensitive response to acetic acid at 300 °C, while also having good stability and selectivity. Therefore, Co-SnO 2 shows great potential in the detection of acetic acid. The improvement of gas-sensing performance is attributed to the formation of many oxygen vacancy defects on the surface of the material caused by Co doping, which is more conducive to the adsorption of oxygen molecules on the surface of the material.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Assembly with copper(ii) ions and D–π–A molecules on a graphene surface for ultra-fast acetic acid sensing at room temperature10.1039/C9RA05706D ↗
2. The acetic acid vapor sensing properties of BaSnO3 microtubes prepared by electrospinning method10.1016/j.mseb.2020.114606 ↗
3. Sub-ppm acetic acid gas sensor based on In2O3 nanofibers10.1007/s10853-019-03877-y ↗
4. Construction, application and verification of a novel formaldehyde gas sensor system based on Ni-doped SnO2 nanoparticles10.1109/JSEN.2021.3053407 ↗
5. Pore size dependent acetic acid gas sensing performance of mesoporous CuO10.1016/j.snb.2021.129639 ↗
6. Y-doped ZnO films for acetic acid sensing down to ppb at high humidity10.1016/j.snb.2020.128843 ↗
7. Flame-made Zn-substituted SnO2 nanoparticulate compound for ultra-sensitive formic acid gas sensing10.1016/j.jallcom.2021.159547 ↗
8. Performance of 3D SnO2 microstructure with porous nanosheets for acetic acid sensing10.1016/j.matlet.2014.12.009 ↗
9. Facile fabrication and enhanced acetic acid sensing properties of honeycomb-like porous ZnO10.1016/j.matlet.2014.09.097 ↗
10. A facile synthesis of Pd-doped SnO2 hollow microcubes with enhanced sensing performance10.1016/j.snb.2015.06.099 ↗
11. Synthesis of actinomorphic flower-like SnO2 nanorods decorated with CuO nanoparticles and their improved isopropanol sensing properties10.1016/j.apsusc.2018.06.150 ↗
12. 2D SnO2 nanosheets: synthesis, characterization, structures, and excellent sensing performance to ethylene glycol10.3390/nano8020112 ↗
13. Two-dimensional nanostructured materials for gas sensing10.1002/adfm.201702168 ↗
14. Room-temperature gas sensors under photoactivation: from metal oxides to 2D materials
15. Construction of MoS2/SnO2 heterostructures for sensitive NO2 detection at room temperature10.1016/j.apsusc.2019.07.052 ↗
16. Au nanoparticle-functionalized 3D SnO2 microstructures for high performance gas sensor10.1016/j.snb.2015.11.140 ↗
17. Stainless steel mesh-supported three-dimensional hierarchical SnO2/Zn2SnO4 composite for the applications in solar cell, gas sensor, and photocatalysis10.1016/j.apsusc.2019.144113 ↗
18. Gas sensors using hierarchical and hollow oxide nanostructures: Overview10.1016/j.snb.2009.04.026 ↗
19. Hydrothermal synthesis of hierarchical SnO2 nanostructures made of superfine nanorods for smart gas sensor10.1016/j.apsusc.2015.12.172 ↗
20. Highly sensitive formaldehyde gas sensors based on Y-doped SnO2 hierarchical flower-shaped nanostructures10.1016/j.jallcom.2019.04.102 ↗
21. Acetone gas sensor based on NiO/ZnO hollow spheres: Fast response and recovery, and low (ppb) detection limit10.1016/j.jcis.2017.01.106 ↗
22. Enhanced formaldehyde detection based on Ni doping of SnO2 nanoparticles by one-step synthesis10.1016/j.snb.2018.02.035 ↗
23. Synthesis of Ce-doped SnO2 nanoparticles and their acetone gas sensing properties10.1016/j.apsusc.2017.02.228 ↗
24. Optimizing the gas sensing characteristics of Co-doped SnO2 thin film based hydrogen sensor10.1016/j.jallcom.2019.01.244 ↗
25. Density gradient strategy for preparation of broken In2O3 microtubes with remarkably selective detection of triethylamine vapor10.1021/acsami.8b09375 ↗
26. Synthesis of Pt-doped SnO2 flower-like hierarchical structure and its gas sensing properties to isopropanol10.1007/s10853-020-05655-7 ↗
27. Efficient hierarchical mixed Pd/SnO2 porous architecture deposited microheater for low power ethanol gas sensor10.1016/j.snb.2017.08.216 ↗
28. One-step synthesis of co-doped In2O3 nanorods for high response of formaldehyde sensor at low temperature10.1021/acssensors.7b00896 ↗
29. SnO2 nanostructure with well-engineered crystal facets by Zn doping for chemical sensing applications10.1021/acs.cgd.0c00121 ↗
30. Effect of the sheet thickness of hierarchical SnO2 on the gas sensing performance10.1016/j.apsusc.2015.07.149 ↗
31. Synthesis of SnO2 nanofibers and nanobelts electron transporting layer for efficient perovskite solar cells10.1039/C8NR00695D ↗
32. Fast response–recovery time toward acetone by a sensor prepared with Pd doped WO3 nanosheets10.1039/C9RA04429A ↗
33. The effect of Ni doping concentration on the gas sensing properties of Ni doped SnO210.1016/j.snb.2016.08.053 ↗
34. Preparation of hollow porous Co-doped SnO2 microcubes and their enhanced gas sensing property10.1039/c3ce41148f ↗
35. SnO2 nano-rods promoted by In, Cr and Al cations for toluene total oxidation: the impact of oxygen property and surface acidity on the catalytic activity10.1016/j.apsusc.2017.05.146 ↗
36. Superior acetone gas sensor based on electrospun SnO2 nanofibers by Rh doping10.1016/j.snb.2017.10.011 ↗
37. Synthesis of Rh–SnO2 nanosheets and ultra-high triethylamine sensing performance10.1016/j.jallcom.2019.152730 ↗
38. Synthesis and gas sensing properties of NiO/SnO2 hierarchical structures toward ppb-level acetone detection10.1016/j.materresbull.2018.02.006 ↗
39. Three-dimensionally ordered macroporous SnO2-based solid solution catalysts for effective soot oxidation10.1016/S1872-2067(18)63123-7 ↗
40. Characterization of electrospun Pr-doped ZnO nanostructure for acetic acid sensor10.1016/j.snb.2013.11.058 ↗
41. Synthesis of hierarchical SnO2 nanoflowers with enhanced acetic acid gas sensing properties10.1016/j.apsusc.2015.06.089 ↗
42. Highly sensitive acetic acid gas sensor based on coral-like and Y-doped SnO2 nanoparticles prepared by electrospinning10.1016/j.matlet.2014.09.040 ↗
43. The acetic acid gas sensing properties of graphene quantum dots (GQDs)–ZnO nanocomposites prepared by hydrothermal method
44. Preparation of g–C3N4–SnO2 composites for application as acetic acid sensor10.1016/j.jallcom.2019.153355 ↗
45. Visible-light-enhanced gas sensing of CdSxSe1−x nanoribbons for acetic acid at room temperature10.1016/j.snb.2015.03.082 ↗
46. Synthesis of Co-doped SnO2 nanofibers and their enhanced gas-sensing properties10.1016/j.snb.2016.06.006 ↗
47. Designed synthesis of Co-doped sponge-like In2O3 for highly sensitive detection of acetone gas10.1039/C8CE02058B ↗