Optical, morphological, and impedance characteristics of Ni(x)–(CdO)(1-x) nanofibers fabricated by electrospinning technique
Source abstract
Abstract
One-dimensional, elemental doped CdO nanofibers have emerged as marvelous fibrous materials for translation into energy harvesting devices technology, however very little is reported about these materials. This study describes the fabrication and characterization of Nix/(CdO)1-x doped nanofibers, with foremost emphasis on the dielectric properties for a range of Ni concentrations (0 ≤ x ≤ 15 wt%), produced by a dc-driven electrospinning technique. X-ray diffraction, energy dispersive spectroscopy, and fourier-transform infra-red spectroscopyprovide a strong signature on the crystalline cubic phase and formation of contamination free CdO nanofibers. Ni doping leads to altering the electrical, optical, and morphological characteristics of the nanofibers. The grain size and average diameter of the fibers were varied from 22 to 11 nm and 70–120 nm respectively while the spectral emission of the photon energies spanned over 1.7–1.2 eV. The impedance, dielectric properties, and conductivity were strongly affected by Ni doping with the smallest charge transfer resistance and the highest charge separation obtained for x = 15% Ni. A comprehensive analysis of metal doped Ni x/ (CdO ) 1-x electrospun nanofibers with tuneable characteristics will offer innovative strategies and opportunities for possible sustainable energy production, and creative solutions to biomedical, healthcare, sensor devices, and environmental problems.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Electrospun Nanofibers in Biomedical Applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Electrospun nanofibers in energy and environmental applications10.1039/b809074m ↗
2. Functional materials by electrospinning of polymers10.1016/j.progpolymsci.2013.02.001 ↗
3. S. Akhtar, et al., Synthesis and characterization of amphotericin B stabilized gold nanoparticles sensor for detection of clindamycin drug, Mater. Res. Exp. 6(7) (2019) 075068.10.1088/2053-1591/ab193f ↗
4. Far-infrared absorption in ultrafine Al particles10.1103/PhysRevLett.38.1161 ↗
5. Antibacterial and antiviral potential of colloidal Titanium dioxide (TiO2) nanoparticles suitable for biological applications10.1088/2053-1591/ab3b27 ↗
6. Indium-cadmium-oxide films having exceptional electrical conductivity and optical transparency: Clues for optimizing transparent conductors10.1073/pnas.121188298 ↗
7. Study of composition and morphology of cadmium oxide (CdO) nanoparticles for eliminating cancer cells
8. A.S. Lanje, et al., Luminescence and electrical resistivity properties of cadmium oxide nanoparticles. 2011.
9. Sputtered cadmium oxide and indium oxide/tin oxide films as transparent electrodes to cadmium sulfide10.1149/1.2404320 ↗
10. Nanostructured cadmium oxide thin films for hydrogen sensor10.1016/j.ijhydene.2012.08.098 ↗
11. Synthesis and Properties of Cadmium Oxide Thin Films Prepared By Simple Chemical Method10.1016/j.egypro.2018.11.189 ↗
12. Robust, self-adhesive, reinforced polymeric nanofilms enabling gas-permeable dry electrodes for long-term application10.1073/pnas.2111904118 ↗
13. Structural and optical properties of electrospun TiO2 nanofibers10.1021/cm702601t ↗
14. Preparation, characterization and application of novel conductive NiO–CdO nanofibers with dislocation feature10.1039/C1JM12623G ↗
15. Electrospinning preparation and characterization of cadmium oxide nanofibers10.1016/j.cej.2009.08.004 ↗
16. Transparent conducting oxides10.1557/mrs2000.256 ↗
17. Comparison of thin film and bulk forms of the transparent conducting oxide solution Cd 1+ x In 2–2x Sn x O 410.1063/1.1410882 ↗
18. Diffused planar InP bipolar transistor with a cadmium oxide film emitter10.1049/el:19840490 ↗
19. Laser emission from electrospun polymer nanofibers10.1002/smll.200801165 ↗
20. A Review on Electrospun Luminescent Nanofibers: Photoluminescence Characteristics and Potential Applications10.2174/1573413715666190112121113 ↗
21. Electrical and optical properties of tin-doped CdO films deposited by atmospheric metalorganic chemical vapor deposition10.1016/S0040-6090(02)00344-9 ↗
22. Effect of thallium doping on the electrical and optical properties of CdO thin films10.1002/pssa.200723472 ↗
23. Preparation and characterization of highly conducting and transparent Al doped CdO thin films by pulsed laser deposition10.1016/j.cap.2008.06.004 ↗
24. Dopant ion size and electronic structure effects on transparent conducting oxides. Sc-doped CdO thin films grown by MOCVD10.1021/ja0467925 ↗
25. Electrical and optical properties of iron-doped CdO10.1016/j.tsf.2009.11.026 ↗
26. Structural, magnetic, and dielectric properties of Ti4+− M2+ co-doped BaFe11Ti0. 5M0. 5O19 hexaferrites (M= Co2+, Ni2+, Zn2+)10.1016/j.ceramint.2021.02.087 ↗
27. Effect of Magnesium Substitution on Structural, Magnetic and Biological Activity of Co (1–x) Mg (x) Fe2O4 Nano-colloids10.1007/s10876-020-01862-z ↗
28. Light-Emitting Electrospun Nanofibers for Nanophotonics and Optoelectronics10.1002/mame.201200277 ↗
29. J. Huang, T. You, Advances in nanofibers, ed., R. maguire. InTech, Croatia, 2013, p. 35–83.
30. Electrospinning of polymeric nanofibers for drug delivery applications10.1016/j.jconrel.2014.04.018 ↗
31. A review of the effect of processing variables on the fabrication of electrospun nanofibers for drug delivery applications10.1155/2013/789289 ↗
32. Field-controlled magnetoelectric core-shell CoFe2O4@ BaTiO3 nanoparticles as effective drug carriers and drug release in vitro10.1016/j.msec.2020.111444 ↗
33. Effect of lanthanum substitution on shape and cytotoxicity of zinc oxide (LaxZn1− XO) nano-colloids10.1088/2053-1591/ab024e ↗
34. Super-hydrophobic surface of aligned polyacrylonitrile nanofibers10.1002/1521-3773(20020402)41:7<1221::AID-ANIE1221>3.0.CO;2-G ↗
35. Membrane-based synthesis of nanomaterials10.1021/cm960166s ↗
36. Quantum confinement and photoluminescence of well-aligned CdO nanofibers by a solvothermal route10.1016/j.matlet.2014.01.048 ↗
37. Nanofabrication by scanning probe microscope lithography: A review10.1116/1.1926293 ↗
38. Nanolithography and nanochemistry: probe-related patterning techniques and chemical modification for nanometer-sized devices10.1002/anie.200300609 ↗
39. Polystyrene-block-poly (2-cinnamoylethyl methacrylate) Nanofibers—Preparation, Characterization, and Liquid Crystalline Properties10.1002/(SICI)1521-3765(19990903)5:9<2740::AID-CHEM2740>3.0.CO;2-V ↗
40. Self-assembly at all scales10.1126/science.1070821 ↗
41. Controlled deposition of electrospun poly (ethylene oxide) fibers10.1016/S0032-3861(01)00336-6 ↗
42. Electrospinning and the formation of nanofibers
43. Electrospun nanofibers: solving global issues10.1016/S1369-7021(06)71389-X ↗
44. Synthesis, characterization and optical band gap of CdO nanofibers derived from anthranilic acid precursors via a thermal decomposition route
45. Biocompatibility and cytotoxicity in vitro of surface-functionalized drug-loaded spinel ferrite nanoparticles10.3762/bjnano.12.99 ↗
46. A review on polymer nanofibers by electrospinning and their applications in nanocomposites10.1016/S0266-3538(03)00178-7 ↗
47. Highly porous CdO nanowires: preparation based on hydroxy-and carbonate-containing cadmium compound precursor nanowires, gas sensing and optical properties10.1088/0957-4484/19/24/245611 ↗
48. Electrospun porous hybrid CuO/CdO nanofibers using carboxylic-functionalized poly (arylene ether ketone) s as a template for glucose determination10.1177/0954008318811471 ↗
49. Role of CdO addition on the growth and photocatalytic activity of electrospun ZnO nanofibers: UV vs. visible light10.1016/j.apsusc.2014.01.146 ↗
50. A novel fabrication methodology for sulfur-doped ZnO nanorods as an active photoanode for improved water oxidation in visible-light regime10.1088/1361-6528/aa51b6 ↗
51. Effect of structural, electrical and magneto-optical properties of CeMnxFe1-xO3-δ perovskite materials10.1016/j.solidstatesciences.2019.02.007 ↗
52. Structural, electrical and optical properties of sol-gel synthesized cobalt substituted MnFe2O4 nanoparticles10.1016/j.physb.2017.06.020 ↗
53. Frequency dependence of ultrahigh dielectric constant of novel synthesized SnO2 nanoparticles thick films10.1016/j.cap.2010.08.011 ↗
54. Sensitive and selective non-enzymatic glucose detection using electrospun porous CuO–CdO composite nanofibers10.1007/s10853-018-3034-5 ↗
55. Unique nonenzymatic glucose sensor using a Hollow-Shelled triple oxide Mn–Cu–Al nanocomposite10.1021/acsomega.0c00417 ↗
56. Impact of CuO doping on the properties of CdO thin films on the catalytic degradation by using pulsed-Laser deposition technique10.1016/j.optmat.2020.109663 ↗
57. Sensitive hydrazine detection using a porous Mn2O3 nanofibers‐based sensor10.1002/elan.201000660 ↗
58. J. Huang, T. You, Electrospun nanofibers: from rational design, fabrication to electrochemical sensing applications. Adv. Nanofibers, 2013, 35.10.5772/57099 ↗
59. J. Mu, et al., High photocatalytic activity of ZnO− carbon nanofiber heteroarchitectures 3(2) (2011) 590-596.10.1021/am101171a ↗
60. Facile fabrication and photocatalytic application of Ag nanoparticles-TiO2 nanofiber composites10.1166/jnn.2011.3805 ↗
61. Electrospun Nanofibers: Materials, Synthesis Parameters, and Their Role in Sensing Applications10.1002/mame.202100410 ↗
62. A fully transparent and flexible ultraviolet–visible photodetector based on controlled electrospun ZnO-CdO heterojunction nanofiber arrays10.1002/adfm.201502499 ↗
63. Synthesis, optical properties and efficient photocatalytic activity of CdO/ZnO hybrid nanocomposite10.1016/j.jpcs.2017.09.003 ↗
64. Recent insights into breast cancer incidence trends among four Asian countries using age-period-cohort model10.2147/CMAR.S208323 ↗
65. Nanostructured metal oxides and its hybrids for photocatalytic and biomedical applications10.1016/j.cis.2020.102178 ↗
66. Reinforcement of electroactive characteristics in polyvinylidene fluoride electrospun nanofibers by intercalation of multi-walled carbon nanotubes10.1007/s10965-017-1196-5 ↗
67. The Development of Accounting Information System Based on Excel in Helping CV. Ladi Collection Preparing Their Financial Statement10.31106/jema.v15i01.778 ↗
68. Nanofiber cadmium oxide thin films prepared from ethanolamine complexing agent by solution growth method10.1016/j.ijleo.2021.167402 ↗
69. Large-Scale Direct-Writing of Aligned Nanofibers for Flexible Electronics10.1002/smll.201703521 ↗
70. Composites of Ceramic and Polymeric Nanofibers for Photocatalytic Degradation of Dairy Effluent
71. Optical band gap and the Burstein-Moss effect in iodine doped PbTe using diffuse reflectance infrared Fourier transform spectroscopy10.1088/1367-2630/15/7/075020 ↗
72. Synthesis and characterization of CuO nanofibers, and investigation for its suitability as blocking layer in ZnO NPs based dye sensitized solar cell and as photocatalyst in organic dye degradation10.1016/j.jssc.2011.12.013 ↗
73. Effects of CuO on the morphology and conducting properties of PANI nanofibers10.1016/j.synthmet.2012.05.009 ↗
74. Gold: a versatile tool for in vivo imaging10.1039/C2TB00020B ↗