journal article·2022-06

High density La-Fe-Si based magnetocaloric composites with excellent properties produced by spark plasma sintering

X.C. Zhong, S.M. Wu, X.T. Dong, Y.X. Li, J.H. Huang, C.L. Liu, H. Zhang, Y.L. Huang, H.Y. Yu, W.Q. Qiu, Z.W. Liu, M.L. Zhong, Z.C. Zhong, R.V. Ramanujan

Publisher page

Abstract

La(Fe,Si) 13 based magnetocaloric composites were prepared by spark plasma sintering (SPS), followed by annealing. The microstructure, mechanical and magnetocaloric properties were investigated. With increasing SPS temperature ( T SPS) below 1373 K, the content of (La,Pr)(Fe,Co,Si) 13 majority phase increased, while the content of minority phase α-Fe decreased. The increase of T SPS from 973 K to 1373 K greatly improved the composite density, and the density sharply increased from ∼ 68 % to 98 %. After SPS at 1273 K/5 min followed by 1323 K/24 h annealing, high content of 89.35 wt% of the desired (La,Pr)(Fe,Co,Si) 13 phase was obtained in LaFe 11.6Si 1.4/10wt%Pr 2Co 7 composites. A large increase of Curie temperature ( T C) from 196 K to 297 K was observed. The maximum magnetic entropy change (−Δ S M) max reached 2.3 J/(kg‧K) under 2 T magnetic field. ∼ 97 % of full density, excellent compressive strength of ∼ 1GPa and high thermal conductivity of 17.68 W/m∙K were exhibited. Thus, a route to produce high density La-Fe-Si based magnetocaloric composites with excellent mechanical properties and thermal conductivity, good (−Δ S M) max and adjustable T C by short time spark plasma sintering followed by annealing was demonstrated.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic and transport properties of perovskites and related materials · Shape Memory Alloy Transformations · Magnetic Properties of Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. LaFe11.6Si1.4Hy/Sn magnetocaloric composites by hot pressing10.1016/j.scriptamat.2016.04.021 ↗
2. Magnetocaloric effect: from materials research to refrigeration devices10.1016/j.pmatsci.2017.10.005 ↗
3. Iron and manganese based magnetocaloric materials for near room temperature thermal management10.1016/j.pmatsci.2018.09.005 ↗
4. Giant magnetocaloric effect in Gd5(Si2Ge2)10.1103/PhysRevLett.78.4494 ↗
5. Transition-metal-based magnetic refrigerants for room-temperature applications10.1038/415150a ↗
6. Influence of negative lattice expansion and metamagnetic transition on magnetic entropy change in the compound LaFe11.4Si1.610.1063/1.1375836 ↗
7. Stability of metallic, magnetic and electronic states in NaZn13-type La(FexSi1−x)13 magnetocaloric compounds10.1016/j.scriptamat.2012.03.033 ↗
8. Novel design of La(Fe, Si)13 alloys towards high magnetic refrigeration performance10.1002/adma.201000177 ↗
9. Microstructures of (Fe0.88Co0.12)82La7Si11 prepared by arc-melting/melt spinning and subsequent annealing10.1007/s00339-005-3328-8 ↗
10. Recent progress in exploring magnetocaloric materials10.1002/adma.200901072 ↗
11. Microstructure and magnetocaloric effect in cast LaFe11.5Si1.5Bx (x=0.5, 1.0)10.1016/j.jmmm.2009.10.042 ↗
12. The effects of interstitial atoms H and B on magnetic properties and magnetocaloric effect in LaFe11.5Al1.5 compound10.1063/1.4876261 ↗
13. Effect of interstitial nitrogen on magnetism and entropy change of LaFe11.7Si1.3 compound10.1016/j.jmmm.2008.08.081 ↗
14. Magnetocaloric effect in itinerant electron metamagnetic systems La(Fe1−xCox)11.9Si1.110.1063/1.1847071 ↗
15. Systematic investigation of Mn substituted La(Fe,Si)13 alloys and theirhydrides for room-temperature magnetocaloric application10.1016/j.jallcom.2014.02.015 ↗
16. Large magnetocaloric effects enhanced by partial substitution of Ce for La in La(Fe0.88Si0.12)13 compound10.1016/j.jallcom.2004.12.112 ↗
17. Magnetocaloric effect in La1−xPrxFe10.7Co0.8Si1.5 compounds near room temperature10.1088/0022-3727/41/24/245005 ↗
18. Structure and magnetic entropy change of melt-spun laFe11.57Si1.43 ribbons10.1063/1.1844605 ↗
19. Large magnetocaloric effect in melt-spun LaFe13-xSix10.1063/1.1847871 ↗
20. PoredošEpoxy-bonded La-Fe-Co-Si magnetocaloric plates10.1016/j.jmmm.2014.08.074 ↗
21. Enhanced mechanical properties and large magnetocaloric effects in bonded La(Fe,Si)13-based magnetic refrigeration materials
22. LaFe11.6Si1.4/Cu magnetocaloric composites prepared by hot pressing10.1109/TMAG.2015.2436902 ↗
23. A bimodal particle size distribution enhances mechanical and magnetocaloric properties of low-temperature hot pressed Sn-bonded La0.8Ce0.2(Fe0.95Co0.05)11.8Si1.2 bulk composites10.1016/j.jmmm.2018.08.053 ↗
24. On the preparation of La(Fe,Mn,Si)13Hx polymer-composites with optimized magnetocaloric properties10.1016/j.jmmm.2015.08.044 ↗
25. Improvement in the magnetocaloric properties of sintered La(Fe, Si)13 based composites processed by La-Co grain boundary diffusion10.1016/j.jallcom.2018.11.395 ↗
26. Enhancing the properties of spark plasma sintered nanocrystalline NdFeB magnets by the addition of Cu-Zn alloy and Dy2O3 powders10.1007/s11664-019-07703-8 ↗
27. Fast synthesis of LaFe13−xSix magnetocaloric compounds by reactive spark plasma sintering10.1016/j.jallcom.2015.04.199 ↗
28. Microstructure and improved magnetocaloric properties: LaFeSi/LaAl magnets prepared by spark plasma sintering technique10.1088/1361-6463/aaad28 ↗
29. Table-like magnetocaloric effect and enhanced refrigerant capacity of HPS La(Fe,Si)13-based composites by Ce–Co grain boundary diffusion10.1007/s10853-020-04449-1 ↗
30. The effect of the thermal decomposition reaction on the mechanical and magnetocaloric properties of La(Fe,Si,Co)1310.1016/j.actamat.2012.04.027 ↗
31. Spark plasma sintering technology
32. Phase structure and magnetocaloric properties of La(Fe1-xCox)13-ySiy alloys
33. Microstructure and isothermal magnetic entropy change of La(Fe0.89Si0.11)13 in a single-phase formation process by annealing10.1016/j.jallcom.2013.03.036 ↗
34. B. Predel, (Eds. Pr-Co (Praseodymium-Cobalt) phase diagram. in: phase equilibria, crystallographic and thermodynamic data of binary alloys (Landolt-Börnstein: numerical data and functional relationships in science and technology-new series)[M].
35. Systematic study of the microstructure, entropy change and adiabatic temperature change in optimized La-Fe-Si alloys10.1016/j.actamat.2011.02.033 ↗
36. Phase equilibria in the Fe-La-Si ternary system10.1016/j.intermet.2011.06.005 ↗
37. Grain boundary diffusion in nanocrystalline Nd-Fe-B permanent magnets with low-melting eutectics10.1016/j.actamat.2016.05.048 ↗
38. Microstructural evolution, magnetocaloric effect, mechanical and thermal properties of hot-pressed LaFe11.6Si1.4/Ce2Co7 composites prepared using strip-cast master alloy flakes10.1016/j.jmmm.2020.167652 ↗
39. Impact of interface structure on functionality in hot-pressed La-Fe-Si/Fe magnetocaloric composites10.1016/j.actamat.2020.04.042 ↗
40. La0.8Ce0.2(Fe0.95Co0.05)11.8Si1.2/Sn42Bi58 magnetocaloric composites prepared by low temperature hot pressing10.1016/j.jallcom.2017.12.108 ↗
41. LaFe11Co0.8Si1.2/Al magnetocaloric composites prepared by hot pressing10.1016/j.jallcom.2020.153846 ↗
42. Outstanding comprehensive performance of La(Fe, Si)13Hy/In composite with durable service life for magnetic refrigeration10.1002/aelm.201700636 ↗
43. On a generalised approach to first and second order magnetic transitions10.1016/0031-9163(64)91158-8 ↗