Cold sintering assisted two-step sintering of potassium sodium niobate (KNN) ceramics
Source abstract
Abstract
Potassium sodium niobate (KNN) ceramics were densified using a multiple-stage sintering process in which initially applied cold sintering process (CSP) was followed by the solid-state sintering between 1100 and 1120 degrees C. Comparative assessments demonstrated that multi-step sintered samples yielded better properties than conventionally sintering ones. The highest relative density (94.7%) and the best electrical properties were obtained from the sample subjected to cold sintering at 120 degrees C/1 h using 5 wt% deionized water subsequently heat treated at 1120 degrees C/2 h, resulting in a monolithic KNN ceramic having a piezoelectric coefficient of 120 pC/N.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Cold sintering of ceramics and glasses: A review10.1016/j.cossms.2020.100807 ↗
2. The cold sintering process: A review on processing features, densification mechanisms and perspectives10.1016/j.jeurceramsoc.2021.09.024 ↗
3. A review of cold sintering processes10.1080/17436753.2019.1706825 ↗
4. A theoretical analysis of cold sintering10.1080/17436753.2019.1692173 ↗
5. Cold sintering of diatomaceous earth10.1111/jace.17863 ↗
6. Synthesis of potassium–sodium niobate (KNN) from NbO210.1016/j.oceram.2021.100159 ↗
7. Hydrothermal synthesis of potassium–sodium niobate powders10.1111/jace.18349 ↗
8. Sintering of lead-free piezoelectric sodium potassium niobate ceramics10.3390/ma8125449 ↗
9. Piezoelectric and ferroelectric properties of K0. 5Na0. 5NbO3 ceramics synthesized by spray drying method10.1016/j.materresbull.2010.09.034 ↗
10. Composition, microstructure and electrical properties of K0. 5Na0. 5NbO3 ceramics fabricated by cold sintering assisted sintering10.1016/j.jeurceramsoc.2018.11.044 ↗
11. Effect of NaCl on the microstructure and electrical properties of K0. 5Na0. 5NbO3 ceramics prepared by cold sintering process10.1007/s10854-019-02523-2 ↗
12. Enhanced piezoelectric property in Mn-doped K0. 5Na0. 5NbO3 ceramics via cold sintering process and KMnO4 solution10.1111/jace.18537 ↗
13. Effect of dwell time on cold sintering assisted sintering based highly transparent 0.9K0. 5Na0. 5NbO3-0.1LiBiO3 ceramics10.1016/j.jallcom.2020.154249 ↗
14. Elevating electrical properties of (K, Na) NbO3 ceramics via cold sintering process and post-annealing10.1111/jace.18103 ↗
15. Low-temperature synthesis of K0. 5Na0. 5NbO3 ceramics in a wide temperature window via cold-sintering assisted sintering method and enhanced electrical properties10.1016/j.jeurceramsoc.2022.09.041 ↗
16. Hydroflux-assisted densification: applying flux crystal growth techniques to cold sintering10.1007/s10853-020-04926-7 ↗
17. Cold sintering of the ceramic potassium sodium niobate, (K0.5Na0.5)NbO3, and influences on piezoelectric properties10.1016/j.jeurceramsoc.2021.10.002 ↗
18. Composition segregation and grain growth in (K0. 5Na0. 5) NbO3 piezoceramics prepared by two‐step cold sintering process10.1111/jace.18847 ↗
19. Zeolite decorated highly porous acicular calcium silicate ceramics10.1016/j.ceramint.2014.04.028 ↗
20. Cold Sintering of Calcium Carbonate for Construction Material Applications10.1021/acsomega.0c04617 ↗
21. Cold sintering process of ZnO ceramics: Effect of the nanoparticle/microparticle ratio10.1016/j.jeurceramsoc.2020.05.059 ↗
22. Influence of powder characteristics on cold sintering of nano-sized ZnO with density above 99 %10.1016/j.jeurceramsoc.2020.11.007 ↗
23. Protocol for ultralow-temperature ceramic sintering: an integration of nanotechnology and the cold sintering process10.1021/acsnano.6b03800 ↗
24. Cold sintering as a promising ISRU technique: A case study of Mars regolith simulant10.1016/j.icarus.2022.115270 ↗
25. Chemical stability of KNbO3, NaNbO3, and K0. 5Na0. 5NbO3 in aqueous medium10.1111/jace.15291 ↗
26. Enhancement of densification and microwave dielectric properties in LiF ceramics via a cold sintering and post-annealing process10.1016/j.jeurceramsoc.2020.09.073 ↗
27. High quality factor cold sintered LiF ceramics for microstrip patch antenna applications10.1016/j.jeurceramsoc.2021.03.052 ↗
28. Boosting densification and microwave dielectric properties in cold sintered BaF2 ceramics for 5.8 GHz WLAN applications10.1016/j.jallcom.2021.161141 ↗
29. Preparation and characterization of (K0. 5Na0. 5) NbO3 ceramics10.1016/j.jeurceramsoc.2004.11.022 ↗
30. Sintering and Electrical Properties of Lead-Free Na0.5K0.5NbO3 Piezoelectric Ceramics10.1111/j.1551-2916.2006.00991.x ↗
31. Hot pressing of potassium-sodium niobates10.1111/j.1151-2916.1962.tb11127.x ↗
32. Electrical characteristics of low temperature densified barium titanate10.1016/j.ceramint.2020.03.240 ↗
33. Ultrahigh electro-strain in acceptor-doped KNN lead-free piezoelectric ceramics via defect engineering10.1016/j.actamat.2020.08.073 ↗