journal article·2018-12

CuxCrFeMoTi (x = 0.21, 0.44, 1) high entropy alloys as novel materials for fusion applications

M. Dias, A. Ruza, F. Guerreiro, R.C da Silva, A.P. Gonçalves, U.V. Mardolcar, E. Alves

Publisher page

Abstract

Abstract High entropy alloys of type CuxCrFeMoTi (x = 0.21, 0.44, 1) were produced by arc melting and characterized using scanning electron microscopy, coupled with energy dispersive X-ray spectroscopy, powder X-ray diffraction and electron backscattered diffraction. The observations revealed that all samples are multiphasic evidencing Cu-rich dendritic structures. The diffractograms of the samples indicate the presence of hexagonal type MgZn2, cubic type MgCu2 Laves phases and peaks of BCC structure. Electron backscattered diffraction results indicated that the Cr, Ti and Fe-rich dominant phase corresponds to the hexagonal Laves phase of type MgZn2 while the Cu-rich dendritic phase is related to the BCC cubic structure. In order to study the thermal diffusivity of these materials and their application as thermal barriers, a sample with nominal Cu0.17CrFeMo0.17Ti composition was prepared. This material shows low thermal diffusivity values in the 425–875 K temperature range.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Status of R&D activities on materials for fusion ower reactors10.1088/0029-5515/47/10/S18 ↗
2. Neu and the ASDEX upgrade team, deuterium inventory in the full-tungsten divertor of ASDEX Upgrade10.1088/0029-5515/50/3/035001 ↗
3. Synergisyic helium and deuterium blistering in tungsten-tantalum composites10.1016/j.jnucmat.2013.08.010 ↗
4. Effects of helium and deuterium irradiation on SPS sintered W-Ta composites at different temperatures10.1016/j.jnucmat.2013.02.068 ↗
5. Davis · 2001
6. Materials challenges for ITER – Current status and future activities
7. Developing structural, high-heat flux and plasma facing materials for a near-term DEMO fusion power plant: The EU assessment10.1016/j.jnucmat.2014.06.014 ↗
8. Enhancing the DEMO divertor target by interlayer engineering10.1016/j.fusengdes.2015.03.031 ↗
9. Design and preparation of water-cooled plasma facing mockups with diamond/copper composite interlayer10.13182/FST13-726 ↗
10. “A new carbon structure formed at MeV neutron irradiation of diamond: structural and spectroscopic investigations10.1016/S0925-9635(99)00118-1 ↗
11. Thermal fatigue damage in monofilament reinforced copper for heat sink applications in divertor elements10.1016/j.jnucmat.2010.12.242 ↗
12. Impact of long-term thermal exposure on a SiC fiber-reinforced copper matrix composite10.1016/j.jnucmat.2013.07.055 ↗
13. Development of W/Cu- functionally graded materials10.1016/S0920-3796(03)00220-5 ↗
14. Performance of W/Cu FGM based plasma facing components under high heat load test10.1016/j.jnucmat.2007.01.184 ↗
15. Thermal and mechanical properties of infiltrated W/CuCrZr composite materials for functionally graded heat sink application10.1016/j.jnucmat.2013.03.005 ↗
16. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
17. High-entropy alloys – a new era of exploitation10.4028/www.scientific.net/MSF.560.1 ↗
18. Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0218-9 ↗
19. Wear resistance and high-temperature compression strength of FCC CuCoNiCrAl0,5Fe alloy with boron addition10.1007/s11661-004-0254-x ↗
20. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating10.1002/adem.200300507 ↗
21. microstructure and electrochemical properties of high entropy alloys – a comparison with type-304 stainless steel10.1016/j.corsci.2004.11.008 ↗
22. Electrochemical kinetics of the high entropy alloys in aqueous enviroments – a comparison with type-304 stainless steel10.1016/j.corsci.2004.09.026 ↗
23. Thermal stability and performance of NbSiTaTiZr high-entropy alloy barrier for copper metallization10.1149/2.056111jes ↗
24. Thermal expansion and enhanced heat transfer in high.entropy alloys10.1107/S0021889813005785 ↗
25. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
26. Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0 ≤ x ≤ 2) high-entropy alloys10.1016/j.jallcom.2009.08.090 ↗
27. Formation and stability of equiatomic and nonequiatomic nanocrystalline CuNiCoZnAlTi high-entropy alloys by mechanical alloying10.1007/s11661-010-0344-x ↗
28. Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution10.1016/j.matchemphys.2005.01.001 ↗
29. G. Nozle, W. Kraus, Powder cell for windows, Version 2.2, Federal Institute for Materials Research and Testing, Berlin, 1999.
30. http://www.oxinst.eu/products/microanalysis/ebsd/ebsd-acquisition software/Pages/channel5.aspx.
31. Microstructure characterization of AlxCrCuFeNi high-entropy alloy system with multi-principal elements10.1007/s11661-005-0283-0 ↗
32. Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy10.1016/j.actamat.2010.09.023 ↗
33. structure and composition of precipitates in Al0.3CoCrCu0.5FeNi high-entropy alloy10.1016/j.intermet.2012.07.036 ↗
34. On the element effect of AlCoCrCuFeNi high entropy alloy system10.1016/j.matlet.2006.03.140 ↗
35. Effect of aging temperature on microstructure and properties of AlCoCrCuFeNi high-entropy alloy10.1016/j.intermet.2008.08.012 ↗
36. Deformation and annealing behaviors of high entropy alloy Al0.5CoCrCuFeNi10.1016/j.jallcom.2009.06.182 ↗
37. High-entropy alloys: a critical assessment of their founding principles and future prospects10.1080/09506608.2016.1180020 ↗
38. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
39. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
40. More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase10.1016/j.intermet.2013.05.002 ↗
41. Peculiarities of U-based Laves phases
42. Effects of annealing treatment on phase composition and microstructure of CoCrFeNiTiAlx high-entropy alloys10.1016/j.intermet.2011.10.010 ↗
43. Microstructure and properties of Al0.5CoCrCuFeNiTix (x=0–2.0) high-entropy alloys10.2320/matertrans.47.1395 ↗
44. Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys10.1016/j.msea.2012.06.075 ↗
45. Solid solution alloys of AlCoCrFeNiTix, with excellent room-temperature mechanical properties10.1063/1.2734517 ↗
46. Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys10.1016/j.intermet.2006.08.005 ↗
47. Microstruture and mechanical properties of CoCrFeNiTiAlx high-entropy alloys10.1016/j.msea.2008.12.053 ↗
48. Effects of electro-negativity on the stability of topologically close- packed phase in high entropy alloys10.1016/j.intermet.2014.04.001 ↗
49. A criterion for topological close-packed phase formation in high entropy alloys10.3390/e17042355 ↗
50. Villars · 1991
51. Futjitsuka · J. Nucl. Mater. · 2000 · 238–287 · 114810.1016/S0022-3115(00)00170-7 ↗
52. Rohde · 2013
53. Microstructure, thermophysical and electrical properties in AlxCoCrFeNi high-entropy alloys10.1016/j.mseb.2009.05.024 ↗