journal article·2023-04Open access

Novel technique to study the wet chemical etching response of multi-crystalline silicon wafers

Vladyslav Matkivskyi, Arne Karstein Røyset, Gaute Stokkan, Pål Tetlie, Marisa Di Sabatino, Gabriella Tranell

Abstract

The current work aimed to demonstrate the application of a technique where white light interferometry (WLI) and Laue X-ray crystallography scanner characterisation were combined to study the chemical etching response of diamond cut multi-crystalline Si (mc-Si) wafers. Using this technique, the effect of different texturing additives (isopropyl alcohol, natrium hypochlorite) was evaluated by examining the topography of the mc-Si surfaces before and after etching. The etching responses of monocrystalline Si wafers of (1 0 0), (1 1 0) and (1 1 1) orientations were used as reference for comparison with the multi-crystalline wafers investigated. The texturing results illustrated the influence of different crystal-orientations on the etching rate. It was revealed that for the mc-Si wafers, the etching speed of the different crystal grain-planes is increasing with their crystallographic similarity with the main (hkl) planes (100, 110,111). The comparison of isopropyl alcohol (IPA) and sodium hypochlorite (NaOCl) additives to KOH solutions showed that NaOCl additive is favourable for the polishing of mc-Si wafers, while IPA can be used as polishing only for crystal grains close to the (1 1 1) orientation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Silicon and Solar Cell Technologies · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. S. Philipps, “Fraunhofer Ise, Werner Warmuth, and PSE Projects GmbH,” Photovoltaics Report, p. 48, 2020.
2. NREL, “Best Research-Cell Efficiency Chart,” ed: NREL, 2021.
3. Multicrystalline PERC solar cells: Is light-induced degradation challenging the efficiency gain of rear passivation
4. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
5. Novel method for preparation of interdigitated back contacted a-Si: H/c-Si heterojunction solar cells
6. ACCELERATED PUBLICATION: Multicrystalline silicon solar cells exceeding 20% efficiency10.1002/pip.583 ↗
7. Developed diamond wire sawing technique with high slicing ability for multicrystalline silicon wafers10.1080/10426914.2020.1802037 ↗
8. Chemical mechanical polishing: theory and experiment10.1007/s40544-013-0035-x ↗
9. Chemical mechanical polishing for sapphire wafers using a developed slurry10.1016/j.jmapro.2021.01.004 ↗
10. Novel low-cost alkaline texturing process for diamond-wire-sawn industrial monocrystalline silicon wafers10.1016/j.solmat.2018.05.047 ↗
11. A novel low cost texturization method for large area commercial mono-crystalline silicon solar cells10.1016/j.solmat.2006.06.044 ↗
12. Pyramidal texturing of silicon solar cell with TMAH chemical anisotropic etching10.1016/j.solmat.2006.03.005 ↗
13. “Chemical etching of silicon: IV
14. A laser texturing study on multi-crystalline silicon solar cells10.1016/j.solmat.2020.110587 ↗
15. Rie-texturing of multicrystalline silicon solar cells10.1016/S0927-0248(02)00057-0 ↗
16. Metal-assisted chemical etching of silicon and nanotechnology applications10.1016/j.nantod.2014.04.013 ↗
17. J. N. Ximello Quiebras, “Wet chemical textures for crystalline silicon solar cells,” 2013.
18. A novel additive for rapid and uniform texturing on high-efficiency monocrystalline silicon solar cells10.1016/j.solmat.2020.110947 ↗
19. E. Abdur-Rahman, I. Alghoraibi, and H. Alkurdi, “Effect of isopropyl alcohol concentration and etching time on wet chemical anisotropic etching of low-resistivity crystalline silicon wafer,” International journal of analytical chemistry, vol. 2017, 2017.10.1155/2017/7542870 ↗
20. Effects of IPA on texturing process for mono-crystalline silicon solar cell in TMAH solution
21. Laue scanner: A new method for determination of grain orientations and grain boundary types of multicrystalline silicon on a full wafer scale10.1016/j.actamat.2014.01.050 ↗
22. Wyant · “White light interferometry,” in Holography: a tribute to yuri denisyuk and emmett leith · 2002 · vol. 4737: · 98
23. Etching methods for texturing industrial multi-crystalline silicon wafers: A comprehensive review10.1016/j.solmat.2021.111531 ↗
24. N. Abd Aziz, B. Bais, A. A. Hamzah, and B. Y. Majlis, “Characterization of HNA etchant for silicon microneedles array fabrication,” in 2008 IEEE International Conference on Semiconductor Electronics, 2008: IEEE, pp. 203-206.10.1109/SMELEC.2008.4770308 ↗
25. Novel combinatory method for surface and crystallinity analysis of crystalline materials
26. Investigation of nanoscale quasi pyramid texture for HIT solar cells using n-type high performance multicrystalline silicon10.1016/j.egypro.2017.09.306 ↗
27. EDAX, “OIM Analysis,” ed, 2018, p. https://www.edax.com/.
28. Texture analysis with MTEX–free and open source software toolbox
29. Anisotropic etching of 100 and 110 planes in (100) silicon10.1088/0960-1317/11/3/309 ↗
30. Inhibition of pyramid formation in the etching of Si p (100) in aqueous potassium hydroxide-isopropanol10.1088/0960-1317/5/3/002 ↗
31. The effect of isopropyl alcohol concentration on the etching process of Si-substrates in KOH solutions10.1016/j.sna.2011.09.005 ↗
32. Anisotropic etching of silicon10.1109/T-ED.1978.19250 ↗
33. Anisotropic etching of silicon in a two-component alkaline solution10.1088/0960-1317/13/2/301 ↗
34. Novel low cost chemical texturing for very large area industrial multi-crystalline silicon solar cells10.1088/0268-1242/20/9/009 ↗