journal article·2023-01

Sustainable, bio-based conductive materials from peanut waste for flexible electronics and tunable piezoresistive strain sensors

Mukaddes Sevval Cetin, Aybuke Sultan Demirel, Ozan Toprakci, Hatice Aylin Karahan Toprakci

Publisher page

Abstract

Sustainable engineering applications are of great significance in materials science because of limited natural resources. This study presents a sustainable, bio-based approach for the fabrication of flexible electronics and sensors by using peanut shell and skin as the precursors for conductive carbon-based fillers. Carbonized samples showed differences in terms of morphological, structural, and electrical properties. While peanut shell-based carbon showed higher crystallinity and morphology with multiple channels; peanut skin-based carbon showed stacked, layered morphology with smaller particle size. Elastic modulus of the samples increased, tensile strength, and tensile strain values were decreased for both composite sets. The electrical conductivity of the samples prepared by carbon from peanut shell showed lower percolation concentration. Both composites showed piezoresistive response under cycling loading/unloading and tunable piezoresistive sensors were shown to be sensitive to human motions including horizontal and vertical elbow movement and back and forth knee bending and squatting.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Natural Fiber Reinforced Composites · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Highly filled biochar/ultra-high molecular weight polyethylene/linear low density polyethylene composites for high-performance electromagnetic interference shielding10.1016/j.compositesb.2018.07.049 ↗
2. Development of coffee biochar filler for the production of electrical conductive reinforced plastic10.3390/polym11121916 ↗
3. Biodegradable multiphase poly(lactic acid)/biochar/graphite composites for electromagnetic interference shielding10.1016/j.compscitech.2019.107704 ↗
4. Biochar as a conducting filler to enhance electrical conduction monitoring for concrete structures10.4028/www.scientific.net/KEM.847.149 ↗
5. Electrical and mechanical properties of sugarcane bagasse pyrolyzed biochar reinforced polyvinyl alcohol biocomposite films10.3390/jcs5090249 ↗
6. Development of pressure-responsive polypropylene and biochar-based materials10.3390/mi11040339 ↗
7. Fabrication and characterization of conductive, flexible polymer composites from carbonized pistachio shell wastes
8. Innovative biochar-based composite fibres from recycled material10.3390/ma14185304 ↗
9. Pressure-responsive conductive poly(vinyl alcohol) composites containing waste cotton fibers biochar10.3390/mi13010125 ↗
10. Date palm biochar-polymer composites: an investigation of electrical, mechanical, thermal and rheological characteristics10.1016/j.scitotenv.2017.11.076 ↗
11. Biochar from food waste as a sustainable replacement for carbon black in upcycled or compostable composites10.1016/j.jcomc.2022.100274 ↗
12. Analysis of biochar with different pyrolysis temperatures used as filler in epoxy resin composites10.1016/j.biombioe.2019.01.007 ↗
13. Development of poly(vinyl alcohol)/wood-derived biochar composites for use in pressure sensor applications10.1007/s10853-017-1040-7 ↗
14. The effect of bio-carbon addition on the electrical, mechanical, and thermal properties of polyvinyl alcohol/biochar composites10.1177/0021998315589770 ↗
15. High-temperature annealed biochar as a conductive filler for the production of piezoresistive materials for energy conversion application10.1021/acsaelm.0c00971 ↗
16. A Review on peanut shell powder reinforced polymer composites
17. Biocarbon from peanut hulls and their green composites with biobased poly(trimethylene terephthalate) (PTT)10.1038/s41598-020-59582-3 ↗
18. Potential use of peanut by-products in food processing: A review10.1007/s13197-011-0449-2 ↗
19. Morphological and mechanical characterization of high-strength sulfur composites prepared with variably-sized lignocellulose particles10.1039/D1MA00689D ↗
20. Peanut shell as a green biomolecule support for anchoring Cu2O: a biocatalyst for green synthesis of 1,2,3-triazoles under ultrasonic irradiation10.1186/s13065-019-0612-9 ↗
21. Influence of mineral matter on biomass pyrolysis characteristics10.1016/0016-2361(95)80013-8 ↗
22. Characterization of peanut shells for their valorization in earth brick
23. Mechanical and thermal properties of epoxy composites reinforced with waste peanut shell powder as a bio-filler10.1007/s12221-015-1119-1 ↗
24. Utilization of peanut shell powder as a novel filler in natural rubber10.1002/app.36468 ↗
25. Development and characterization of green composites from bio-based polyethylene and peanut shell10.1002/app.43940 ↗
26. Mechanical and thermal behavior of styrene butadiene rubber composites reinforced with silane-treated peanut shell powder10.1007/s00289-017-1931-4 ↗
27. High-capacity disordered carbons derived from peanut shells as lithium-intercalating anode materials10.1016/S0379-6779(03)00082-1 ↗
28. Peanut shell hybrid sodium ion capacitor with extreme energy-power rivals lithium ion capacitors10.1039/C4EE02986K ↗
29. Flexible supercapacitors prepared using the peanut-shell-based carbon10.1021/acsomega.0c00966 ↗
30. Peanut shell derived carbon combined with nano cobalt: An effective flame retardant for epoxy resin10.3390/molecules26216662 ↗
31. Nitrogen-self doped activated carbon nanosheets derived from peanut shells for enhanced hydrogen evolution reaction10.1016/j.apsusc.2019.06.040 ↗
32. Promising biomass-derived activated carbon and gold nanoparticle nanocomposites as a novel electrode material for electrochemical detection of rutin10.1039/C6RA16804C ↗
33. Preparation of high surface area oxidized activated carbon from peanut shell and application for the removal of organic pollutants and heavy metal ions10.1007/s11270-018-4021-9 ↗
34. Fabrication of P-doped porous carbon catalysts, with inherent n functionality, from waste peanut shells and their application in the metal-free aerobic oxidation of alcohols10.1021/acssuschemeng.1c06692 ↗
35. Peanut skin procyanidins: composition and antioxidant activities as affected by processing10.1016/j.jfca.2005.08.003 ↗
36. Extraction of antioxidant components from peanut10.3989/gya.2002.v53.i4.335 ↗
37. Manufacture and performance of peanut skin cellulose nanocrystals10.1590/1678-992x-2021-0010 ↗
38. R.R. Syahdi, R. Nadyana, R.H. Putri, R. Santi, A. Mun’im, Application of green extraction methods to resveratrol extraction from peanut (Arachis hypogaea L.) skin, Int. J. Appl. Pharm. 12 (2020) 38–42, doi: 10.22159/ijap.2020.v12s1.FF003.10.22159/ijap.2020.v12s1.FF003 ↗
39. Achieving high-energy-high-power density in a flexible quasi-solid-state sodium ion capacitor10.1021/acs.nanolett.6b02932 ↗
40. Efficient ORR electrocatalytic activity of peanut shell-based graphitic carbon microstructures10.1039/C8TA02839G ↗
41. Curly hard carbon derived from pistachio shells as high-performance anode materials for sodium-ion batteries10.1007/s10853-018-2472-4 ↗
42. Effect of activation temperature on the textural and chemical properties of potassium hydroxide activated carbon prepared from pistachio-nut shell10.1016/j.jcis.2003.10.001 ↗
43. Confining small sulfur molecules in peanut shell-derived microporous graphitic carbon for advanced lithium sulfur battery10.1016/j.electacta.2018.04.021 ↗
44. Preparing high surface area porous carbon from biomass by carbonization in a molten salt medium10.1039/C5RA12406A ↗
45. Physical properties of composites near percolation10.1146/annurev-matsci-070909-104529 ↗
46. R. Strümpler, J. Glatz-Reichenbach, Conducting Polymer Composites, J. Electroceramics 34(3) (1999) 329–346, doi: 10.1023/A:1009909812823.10.1023/A:1009909812823 ↗
47. Influence of pressure on the electrical conductivity of metal powders used as fillers in polymer composites10.1016/j.powtec.2003.11.010 ↗
48. Flexible electronics from hybrid nanocomposites and their application as piezoresistive strain sensors10.1016/j.compositesb.2021.109199 ↗
49. Effect of stretching on the properties of rubber10.5254/1.3546914 ↗
50. Behavior of rubber under repeated stresses10.5254/1.3539319 ↗
51. Stress softening in natural rubber vulcanizates. Part III. Carbon black-filled vulcanizates10.1002/app.1966.070100212 ↗
52. Stress softening in natural rubber vulcanizates. Part II. Stress softening effects in pure gum and filler loaded rubbers10.1002/app.1965.070090907 ↗