journal article·2019-07

Particle size and purity control study on ZrW2O8 powders using coprecipitation method

Yan Zhang, Yingkui Guo, Lei Chen, Yujin Wang, Guangwei Zhang, Yuansong Zhou

Publisher page

Abstract

Abstract ZrW2O8 powders with different particles size are synthesized by coprecipitation method. The effects of pH, PEG and calcination temperature on the phase, morphology and particle size of ZrW2O8 powders were investigated. The purity of the ZrW2O8 powder is also detected by XRF, and the optimal parameters of the coprecipitation method are obtained. The coprecipitation precursor is prepared by adding PEG400 into W6+ solution with a preferred pH of 2, and then calcined at 600 °C for 2 h and 1160 °C for 2 h to obtain the small particles size ZrW2O8 powder with narrow particle size distribution. The average particle size of ZrW2O8 powder is about 0.51 μm. The purity of ZrW2O8 powder is 97.95% with 2.05% ZrO2 as impurity due to the thermodynamic instability of ZrW2O8 and the volatilization of WO3 at high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal Expansion and Ionic Conductivity · Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. The negative thermal expansion mechanism of zirconium tungstate ZrW2O8
2. The effect of sintering process on the purity of ZrW2O8 synthesized by solid phase method
3. The negative expansion coefficient material ZrW2O8 prepared by coprecipitation method
4. Synthesis and property study on negative thermal expansion ZrW2O8 powders using the citric acid sol-gel method
5. Effect of acids on the morphology and negative thermal expansion analysis of ZrW2O8powders prepared by the hydrothermal method10.1016/j.ceramint.2012.06.005 ↗
6. Combustion synthesis of ZrW2O8 and preparation of its composite with near zero thermal expansion10.4028/www.scientific.net/KEM.353-358.1235 ↗
7. ZrW2O8 microwave synthesis characterization and negative expansion behavior
8. Synthesis of the negative thermal expansion compound ZrW2O8 by the spray drying technique
9. Zirconium tungstate (ZrW2O8)/polyimide nanocomposites exhibiting reduced coefficient of thermal expansion10.1021/cm0482737 ↗
10. Hydrothermal preparation and photocatalytic water splitting properties of ZrW2O810.1007/s11595-010-0120-1 ↗
11. Spark plasma sintering of sol–gel derived amorphous ZrW2O8 nanopowder10.1111/j.1551-2916.2008.02840.x ↗
12. Hydrothermal synthesis of ZrW2O8 nanorods10.1016/j.physb.2005.09.041 ↗
13. Synthesis of ZrW2O8 by quick cooling and measurement of negative thermal expansion of the sintered bodies10.1016/j.jallcom.2005.07.075 ↗
14. In situ synthesis of ZrO2/ZrW2O8 composites with near-zero thermal expansion10.1111/j.1551-2916.2007.01718.x ↗
15. Synthesis and primary particle size control study on negative thermal expansion ZrW2O8 powders using co-precipitation method
16. Synthesize ZrW2O8 powders with different particle size by co-precipitation method and characterize the negative thermal expansion property
17. Study of phase decomposition in ZrW2O810.1002/adem.201600035 ↗
18. Effect of the cooling ways on the properties and microstructure of ZrO2/ZrW2O8 ceramic composites10.4028/www.scientific.net/KEM.697.381 ↗
19. Studies on gelcasting of zirconia-alumina ceramic
20. Effect of preparation method on particle size and negative thermal expansion property of negative thermal expansion ZrW2O8 powders
21. The influence of sintering temperature on ZrW2O8 prepared by solid phase method
22. Preparation and pressure-induced cubic-to-orthorhombic phase transition in ZrW2O8
23. G. Ventura, M. Perfetti, Thermal Properties of Solids at Room and Cryogenic Temperatures, Springer Netherlands .5 (2014) 81–91.
24. Austenite isochronal transformation kinetics of 1000 MPa cold rolled dual phase steel