Global criterion optimization method for improving the porosity of porous scaffolds containing magnetic nanoparticles: Fabrication and finite element analysis
Source abstract
Abstract
One of the basic parameters of an ideal scaffold is the size of its pores so that the nutrients and oxygen can easily pass via its pores, reach the cells, and be excreted. The size of pores should not be large enough to impair the mechanical strength, nor small enough to be blocked by the cell, prevent the cell and blood vessels from penetrating the internal scaffold and interfering with the extracellular matrix (ECM). Improving the effect of porosity on the mechanical properties of two-component and three-component microporous scaffolds with the ability to improve the ossification and bone repair is of particular importance. While magnetic nanoparticles (MNPs) can improve the mechanical and biochemical properties and biology of bone up to two to three times. In this study, the sodium bicarbonate was used as a space agent, and scanning electron microscope (SEM) and X-ray diffraction (XRD) analysis were performed to evaluate the morphological and phase properties of bioglass-MNPs in the scaffolds content. The mechanical properties, including the scaffold`s compressive strength, along with its porosity and macromolecular properties in neural networks and ABAQUS software, were evaluated and simulated. Mechanical properties show that the elastic modulus increased about three times and the compressive strength by about three times, while the density increases about 15 to 20%. The finite element analysis indicated that the reported material properties and mechanical behavior were in acceptable agreement with the experimental approach. Furthermore, it showed that BG/10 wt% MNPs (S2) had the best material properties and mechanical response compared to BG (S1), and BG/10 wt% Zr (S3). Results show that the biodegradable composition of magnetic nanoparticles with suitable mechanical, chemical and biological properties was used for applying in the bone application.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Calcium Carbonate Crystallization and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Production of Bioglass® 45S5–Polycaprolactone composite scaffolds via salt-leaching10.1016/j.compstruct.2010.01.017 ↗
2. Effect of calcium silicate nanoparticle on surface feature of calcium phosphates hybrid bio-nanocomposite using for bone substitute application10.1016/j.powtec.2019.10.111 ↗
3. Zn and Zr co-doped M-type strontium hexaferrite: Synthesis, characterization and hyperthermia application10.1016/j.cjph.2017.11.016 ↗
4. Fabrication and resonance simulation of 3D-printed biocomposite mesoporous implants with different periodic cellular topologies10.1016/j.bprint.2021.e00138 ↗
5. Effect of modified solvent casting/particulate leaching (SCPL) technique on the properties of bioactive glass reinforced polyurethane scaffold for biomedical applications10.21315/jps2019.30.s2.10 ↗
6. A porous calcium-zirconia scaffolds composed of magnetic nanoparticles for bone cancer treatment: fabrication, characterization and FEM analysis10.1016/j.ceramint.2021.09.216 ↗
7. Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives10.1016/j.msec.2011.04.022 ↗
8. Experimental and numerical research on healing performance of reinforced microcapsule-based self-healing polymers using nanoparticles
9. An artificial soft tissue made of nano-alginate polymer using bioxfab 3D bioprinter for treatment of injuries
10. A novel investigation on the characterization of bioactive glass cement and chitosan-gelatin membrane for jawbone tissue engineering
11. The effect of acetaminophen nanoparticles on liver toxicity in a rat model10.2147/IJN.S5894 ↗
12. Fabrication of shapeless scaffolds reinforced with baghdadite-magnetite nanoparticles using a 3D printer and freeze-drying technique10.1016/j.jmrt.2021.08.084 ↗
13. Tissue engineering needs new biomaterials: poly (xylitol-dodecanedioic acid)–co-polylactic acid (PXDDA-co-PLA) and its nanocomposites10.1016/j.eurpolymj.2021.110469 ↗
14. Improved surface properties in spray-coated PU/TiO2/graphene hybrid nanocomposites through nonsolvent-induced phase separation10.1016/j.surfcoat.2020.126507 ↗
15. Investigation the mechanical properties of a novel multicomponent scaffold coated with a new bio-nanocomposite for bone tissue engineering: fabrication, simulation and characterization10.1016/j.jmrt.2021.10.107 ↗
16. Multi-scale modeling and experimental study on electrosprayed multicore microcapsule-based self-healing polymers
17. Dual effect of cAMP agonist on ameliorative function of PKA inhibitor in morphine-dependent mice10.1111/fcp.12045 ↗
18. How sodium arsenite improve amyloid β-induced memory deficit?10.1016/j.physbeh.2016.04.046 ↗
19. Paradoxical role of PKA inhibitor on amyloidβ-induced memory deficit10.1016/j.physbeh.2015.05.029 ↗
20. Experimental and multi-scale finite element modeling for evaluating healing efficiency of electro-sprayed microcapsule based glass fiber-reinforced polymer composites10.1002/pc.26850 ↗
21. Toxicity of arsenic on isolated human lymphocytes: the key role of cytokines and intracellular calcium enhancement in arsenic-induced cell death10.1515/mgmc-2019-0014 ↗
22. Optimized fabrication of Ca–P/PHBV nanocomposite scaffolds via selective laser sintering for bone tissue engineering10.1088/1758-5082/3/1/015001 ↗
23. Experimental and numerical investigation on the effect of core-shell microcapsule sizes on mechanical properties of microcapsule-based polymers10.1177/00219983221107831 ↗
24. Advances in additive manufacturing for bone tissue engineering scaffolds10.1016/j.msec.2019.03.037 ↗
25. Microsphere-based selective laser sintering for building macroporous bone scaffolds with controlled microstructure and excellent biocompatibility10.1016/j.colsurfb.2015.06.074 ↗
26. Development of a solvent-free polylactide/calcium carbonate composite for selective laser sintering of bone tissue engineering scaffolds10.1016/j.msec.2019.03.101 ↗
27. A femoral shape porous scaffold bio-nanocomposite fabricated using 3D printing and freeze-drying technique for orthopedic application10.1016/j.matchemphys.2021.125302 ↗
28. Virtual testing of advanced composites, cellular materials and biomaterials: a review10.1016/j.compositesb.2014.01.007 ↗
29. Multiscale modeling of the elastic moduli of CNT-reinforced polymers and fitting of efficiency parameters for the use of the extended rule-of-mixtures10.1016/j.compositesb.2018.09.057 ↗
30. On the estimation of mechanical properties of single-walled carbon nanotubes by using a molecular-mechanics based FE approach10.1016/j.compscitech.2008.09.010 ↗
31. Prediction of composite properties from a representative volume element10.1016/0266-3538(95)00141-7 ↗
32. Simulations: the dark side10.1140/epjp/i2013-13010-8 ↗
33. R. Hill, Elastic properties of reinforced solids: some theoretical principles, Phys. Solids (1963).10.1016/0022-5096(63)90036-X ↗
34. A multilayer biomimetic chitosan-gelatin-fluorohydroxyapatite cartilage scaffold using for regenerative medicine application10.1016/j.jmrt.2021.07.052 ↗
35. Experimental measurement and simulation of mechanical strength and biological behavior of porous bony scaffold coated with alginate-hydroxyapatite for femoral applications
36. 3D microstructure-based modelling of the deformation behavior of ceramic matrix composites10.1016/j.jeurceramsoc.2017.11.038 ↗
37. Research on Internet Security Situation Awareness Prediction Technology based on Improved RBF Neural Network Algorithm
38. Implementation of Artificial Intelligence in Agriculture
39. An Intelligent Process Fault Diagnosis System Based on Andrews Plot and Convolutional Neural Network
40. Long-Range Dependencies Learning Based on Non-Local 1D-Convolutional Neural Network for Rolling Bearing Fault Diagnosis
41. Intelligent Fault Diagnosis for Planetary Gearbox Using Transferable Deep Q Network Under Variable Conditions With Small Training Data
42. Modelling of multilayer actuator layers by homogenization technique using Digimat software10.1016/j.ceramint.2016.11.157 ↗
43. Mobile robot scheduling for cycle time optimization in flow-shop cells, a case study10.1007/s11740-017-0784-x ↗