journal article·2022-12

Nanocomposite Mo-Ag-N lubricating, wear resistant and hard coatings fabricated by magnetron sputtering

Q.G. Zhang, Y. Zhou, G.J. Zhang, L.C. Zhang, Z.M. Xie, L. Zuo, H.B. Ju, Q.F. Fang, J.G. Liu, J.F. Yang

Publisher page

Abstract

Mo-Ag-N coatings were prepared by d.c. magnetron sputtering technique from a Mo target with embedded Ag pellets, followed by vacuum annealing at 425, 500, and 600 °C, respectively, for 1 h. SEM, EDS, XRD, nanoindenter, and micro–macro tribometer were used to investigate the influence of Ag content and annealing temperature on their microstructure, surface morphology and mechanical properties. Results demonstrated that as-deposited Mo-Ag-N coatings consisted of fcc γ-Mo 2N phase and fcc Ag phase where Ag uniformly distributed into Mo-N matrix. The hardness of Mo-Ag-N coatings initially increased and then decreased with Ag content, reaching the maximum hardness of 32 GPa at 4 at.% Ag, whereas friction coefficient decreased monotonously with Ag content increasing. With the increase of annealing temperature hardness, friction coefficient, and wear resistance were decreased due to the accumulation of a large amount of Ag agglomerates onto surface resulted from high temperature intriguing phase segregation and diffusion.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Investigation of the structure and properties of PVD coatings and ALD + PVD hybrid coatings deposited on sialon tool ceramics10.1016/j.vacuum.2018.04.032 ↗
2. Evaluation of niobium carbide coatings produced on AISI L2 steel via thermo-reactive diffusion technique10.1016/j.vacuum.2017.09.023 ↗
3. K. Holmberg, A. Matthews, Coatings tribology: properties, mechanisms, techniques and applications in surface engineering, Second ed. 2009.
4. Recent progresses on designing and manufacturing of bulk refractory alloys with high performances based on controlling interfaces10.1016/j.jmst.2020.02.046 ↗
5. He2+ irradiation induced microstructure evolution in sub-surface layer of the coarse-grained tungsten accessed by synchrotron GIXRD and GISAXS10.1016/j.apsusc.2022.153461 ↗
6. In situ tribometry of solid lubricant nanocomposite coatings10.1016/j.wear.2007.01.001 ↗
7. Influence of Cu content on the structure, mechanical and tribological properties of W2N-Cu films10.1016/j.tsf.2017.01.030 ↗
8. PVD multilayer VN–VN/Ag composite coating with adaptive lubricious behavior from 25 to 700 °C10.1039/C6RA02370C ↗
9. The influence of Ag contents on the microstructure, mechanical and tribological properties of ZrN-Ag films10.1016/j.vacuum.2017.10.029 ↗
10. Development of a Ta/TaN/TaNx(Ag)y/TaN nanocomposite coating system and bio-response study for biomedical applications10.1016/j.vacuum.2017.08.020 ↗
11. Nanostructured self-lubricating CrN-Ag films deposited by PVD arc discharge and magnetron sputtering10.1016/j.vacuum.2011.01.022 ↗
12. Influence of silver content on the tribomechanical behavior on Ag-TiCN bioactive coatings10.1016/j.surfcoat.2011.09.059 ↗
13. Effect of Si content on the microstructure and mechanical properties of Mo–Al–Si–N coatings10.1016/j.vacuum.2012.05.009 ↗
14. Mechanical properties of Mo(C)N coatings deposited using cathodic arc evaporation10.1016/j.surfcoat.2017.04.005 ↗
15. High rate reactive sputtering of MoNx coatings10.1016/0257-8972(91)90072-5 ↗
16. Microstructure and tribological properties of W-implanted PVD TiN coatings on 316L stainless steel10.1016/j.vacuum.2013.04.019 ↗
17. Effect of microstructure and thickness on the friction and wear behavior of CrN coatings10.1016/j.wear.2013.02.005 ↗
18. Effect of nitrogen flow rate on structure and properties of MoN x coatings deposited by facing target sputtering10.1016/j.jallcom.2017.01.077 ↗
19. Microstructure and thermal stability of Mo-(Ag)-N coatings with high nitrogen content10.1016/j.surfcoat.2018.08.029 ↗
20. Thin films of Mo2N/Ag nanocomposite–the structure, mechanical and tribological properties10.1016/j.surfcoat.2006.02.017 ↗
21. Characterization of Mo2N/Ag Nanocomposite Coatings Produced by Magnetron Sputtering10.4028/www.scientific.net/KEM.264-268.489 ↗
22. A.E. de Oliveira, M.A. Lemes, M.S. Godinho, D. Rabelo, F.T. Martins, A. Mesquita, F.N. de Souza Neto, O.A. Araujo, Estimating Mean Crystallite Size of Magnetite using Multivariate Calibration and Powder X-ray Diffraction Analysis 61(4) (2014) 8.
23. Microstructure and properties of VN/Ag composite films with various silver content10.1016/j.vacuum.2016.12.020 ↗
24. Magnetron sputter deposition of WC-Ag and TiC-Ag coatings and their frictional properties in vacuum environments10.1016/S1359-6462(02)00236-1 ↗
25. CrN-Ag self-lubricating hard coatings10.1016/j.surfcoat.2005.08.063 ↗
26. Petch · J. Iron Steel Instit., Lond · 1953 · 174 · 25
27. Microstructure, mechanical and tribological properties of TiN-Ag films deposited by reactive magnetron sputtering10.1016/j.vacuum.2017.03.026 ↗
28. CrN–Ag nanocomposite coatings: Tribology at room temperature and during a temperature ramp10.1016/j.surfcoat.2009.09.018 ↗
29. Multilayer Mo2N-Ag/SiNx films for demanding applications: Morphology, structure and temperature-cycling tribological properties10.1016/j.matdes.2022.111128 ↗