journal article·2022-02

Tuning of WO3 nanoparticles integration into Fe–Zn intermetallic layers of hot-dip zinc coating to control corrosion

S.R. Arunima, M.J. Deepa, Liju Elias, M. Ameen Sha, V.S. Sumi, A.H. Riyas, Francis Chacko, R. Remya, S.M.A. Shibli

Publisher page

Abstract

Abstract The paper reports about an in-depth analysis on the dissolution study of ɳ, ζ and δ phases of composite zinc coating developed by integrating WO3 nanoparticles, and assessment of their anti-corrosion characteristics. The composite coating with WO3 nanoparticles effectively integrated into the ɳ phase than the mixed ζ & δ phases or γ phase offers the best corrosion protection characteristics. The superior anti-corrosion performance of composite zinc coating with distinct amount of nanoparticles integration into the ɳ phase than the other intermetallic phases is due to the formation of compact and crack free Fe–Zn intermetallic layer with strong W–Zn bonds. The work is proposed as a cost-effective and simple method for the evaluation of high-temperature coatings, where the performance is influenced by the formation and stability of interior intermetallics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. The effect of the surface morphologies on the corrosion resistance of in situ growth MgAl-LDH based conversion film on AA608210.1016/j.surfcoat.2018.08.006 ↗
2. Ti oxidation states in Zn (Ti) coating of hot-dip galvanized steels10.1016/j.surfcoat.2017.07.024 ↗
3. Nanonetwork composite coating for sensing and corrosion inhibition10.1002/admi.202001073 ↗
4. Bioinspired slippery zinc phosphate coating for sustainable corrosion protection10.1021/acssuschemeng.8b02345 ↗
5. Corrosion-resistant superhydrophobic coatings on Mg alloy surfaces inspired by lotus seedpod10.1002/adfm.201605446 ↗
6. Improvement of mechanical properties and corrosion resistance of biodegradable Mg–Nd–Zn–Zr alloys by double extrusion10.1016/j.mseb.2012.05.020 ↗
7. Tuning of CeO2-MnO2 nano composite in Al-Zn alloy matrix for effective activation10.1016/j.mseb.2020.114768 ↗
8. Investigation of anticorrosive properties of novel silane-functionalized polyamide/GO nanocomposite as steel coatings
9. Carbon dots as fillers inducing healing/self-healing and anticorrosion properties in polymers10.1002/adma.201701399 ↗
10. ZrO2–CeO2 assimilated electroless Ni-P anti-corrosion coatings10.1016/j.surfin.2020.100704 ↗
11. Hot-dip galvanization with pulse-electrodeposited nickel pre-coatings10.1016/j.corsci.2010.09.031 ↗
12. Convenient extraction method for quantification of thin zinc patina layers10.1002/sia.6429 ↗
13. S.M.A. Shibli, R. Manu, 3.2 tuning of the microstructure and surface topography of hot-dip galvanized coatings. (2017) 25–37.10.1016/B978-0-12-803581-8.09198-0 ↗
14. The influence of hot dip galvanizing process on intermetallic phases formation10.1002/mdp2.39 ↗
15. Process and performance improvement of hot-dip zinc coating by dispersed nickel in the under layer10.1016/j.surfcoat.2004.10.115 ↗
16. Exploration of Mo incorporated TiO2 composite for sustained biocorrosion control on zinc coating10.1016/j.apsusc.2019.07.086 ↗
17. Incorporation of TiO2 in hot dip zinc coating for efficient resistance to biogrowth10.1016/j.surfcoat.2005.04.058 ↗
18. Assessment of the role of ζ-and δ-phases in ZrO2–Al2O3 composite based hot dip zinc galvanized coating by layer wise tuning10.1016/j.apsusc.2019.03.190 ↗
19. Layer by layer controlled synthesis at room temperature of tri-modal (MRI, fluorescence and CT) core/shell superparamagnetic IO/human serum albumin nanoparticles for diagnostic applications10.1002/pat.5344 ↗
20. Remotely controlled magneto-regulation of therapeutics from magnetoelastic gel matrices
21. Carbon-dots-initiated photopolymerization: an in situ synthetic approach for MXene/poly (norepinephrine)/copper hybrid and its application for mitigating water pollution10.1021/acsami.1c08111 ↗
22. Hydrothermal synthesis of monoclinic WO3 nanoplates and nanorods used as an electrocatalyst for hydrogen evolution reactions from water10.1016/j.cej.2010.09.003 ↗
23. Synthesis and development of nano WO3 catalyst incorporated Ni–P coating for electrocatalytic hydrogen evolution reaction10.1016/j.ijhydene.2016.04.156 ↗
24. Hierarchical hydrated WO3·0.33 H2O/graphene composites with improved lithium storage10.1016/j.electacta.2018.04.169 ↗
25. WO3 photocatalysts: influence of structure and composition10.1016/j.jcat.2012.07.013 ↗
26. Synthesis of tungsten oxide nanoparticle by acid precipitation method10.1016/j.ceramint.2006.02.007 ↗
27. Sunlight responsive WO3/ZnO nanorods for photocatalytic degradation and mineralization of chlorinated phenoxyacetic acid herbicides in water10.1016/j.jcis.2015.02.075 ↗
28. Effect of Li2CoMn3O8 nanostructures synthesized by combustion method on montmorillonite K10 as a potential hydrogen storage material10.1021/acs.jpcc.8b02617 ↗
29. Enhanced near infrared reflectance with brilliant yellow hues in scheelite type solid solutions, (LiLaZn) 1/3MoO4–BiVO4 for energy saving products10.1021/acssuschemeng.7b00485 ↗
30. Ease synthesis of mesoporous WO3–TiO2 nanocomposites with enhanced photocatalytic performance for photodegradation of herbicide imazapyr under visible light and UV illumination10.1016/j.jhazmat.2015.12.041 ↗
31. Tungsten trioxide (WO3) sputtered thin films for a NOx gas sensor10.1016/S0925-4005(98)00149-X ↗
32. Synthesis and characterization of WO3/graphene nanocomposites for enhanced photocatalytic activities by one-step in-situ hydrothermal reaction10.3390/ma11010147 ↗
33. Experimental evaluation of new inorganic phosphites as corrosion inhibitors for carbon steel in saline water from oil source wells10.1016/j.desal.2016.01.019 ↗
34. Hydroxyethyl cellulose as efficient organic inhibitor of zinc–carbon battery corrosion in ammonium chloride solution: electrochemical and surface morphology studies10.1016/j.jpowsour.2015.01.107 ↗
35. Mica/polypyrrole (doped) composite containing coatings for the corrosion protection of cold rolled steel10.1007/s11998-017-9974-x ↗
36. An evaluation of the corrosion resistance and adhesion properties of an epoxy-nanocomposite on a hot-dip galvanized steel (HDG) treated by different kinds of conversion coatings10.1016/j.surfcoat.2011.04.001 ↗
37. The Zn-rich corner of the Zn-Fe-V-Sb quaternary systems at 450 and 600° C10.1007/s11669-017-0612-1 ↗
38. Resistance of different Zn coatings at elevated temperature air environments10.1179/1743294414Y.0000000442 ↗
39. Mossbauer analysis of the iron-zinc intermetallic phases10.1016/S0966-9795(02)00191-7 ↗
40. Mechanistic interpretation of electrochemical behaviour of galvannealing coating in saline environment10.1016/j.corsci.2004.11.005 ↗
41. Electrochemical stripping of galvannealed coatings on steel10.5006/1.3294338 ↗
42. Effect of Fe–Zn alloy layer on the corrosion resistance of galvanized steel in chloride containing environments10.1016/j.corsci.2007.03.039 ↗
43. A study of galvanic corrosion during coulometric dissolution of galvannealed steel10.1016/0010-938X(94)00155-Y ↗
44. Corrosion resistant performances of alkanoic and phosphonic acids derived self-assembled monolayers on magnesium alloy AZ31 by vapor-phase method10.1021/la200122x ↗
45. Protection of carbon steel corrosion in 3.5% NaCl medium by aryldiazonium grafted graphene coatings10.1039/C7NJ01655G ↗
46. Inhibition of biocorrosion of aluminum 2024 aeronautical alloy by conductive ladder polymer poly (o-phenylenediamine)10.1021/ie101678x ↗
47. Corrosion performance of a hot-dip galvanized steel treated by different kinds of conversion coatings10.1016/j.surfcoat.2010.08.028 ↗
48. Kinetics, mechanism and characterisation of passive film formed on hot-dip galvanized coating exposed in simulated concrete pore solution10.1016/j.surfcoat.2007.01.048 ↗
49. The effect of zirconium-based surface treatment on the cathodic disbonding resistance of epoxy coated mild steel10.1016/j.apsusc.2014.07.178 ↗
50. EIS and ENM as tools to evaluate inhibitive performance of second generation of phosphate-based anticorrosion pigments10.1007/s10800-009-9921-3 ↗
51. Corrosion behavior of carbon steel in the CO2 absorption process using aqueous amine solutions10.1021/ie9901630 ↗
52. Titanium composite conversion coating formation on CRS in the presence of Mo and Ni ions: electrochemical and microstructure characterizations10.1016/j.apsusc.2016.06.095 ↗
53. Effect of Mg content on microstructure and corrosion behavior of hot dipped Zn–Al–Mg coatings10.1016/j.jallcom.2016.02.026 ↗
54. The corrosion resistance of hot - dip galvanized steel pretreated with Bis-functional silanes modified with microsilica10.1016/j.surfcoat.2004.11.012 ↗
55. Aluminum and antimony segregation on a batch hot-dip galvanized Zn-0.05 Al-0.2 Sb coating10.1016/j.jallcom.2016.10.136 ↗