journal article·2022-12

Biomass derived erythrocyte-like hard carbon as anodes for high performing full sodium-ion batteries

Hanchi Wang, Chunlin Li, Jian An, Guoyong Wang

Publisher page

Abstract

Herein, a novel hard carbon is prepared via one-step pyrolysis process from waste Ganoderma spores. We explore four pyrolysis temperatures and obtain the hard carbon product (NG-700) with the best performance. Ganoderma spores are hard that the prototype structure is reserved after pyrolysis process. The NG-700 is erythrocyte-like shape with hollow structure which can hold electrolyte. Many nitrogen atoms doping in NG-700 improve the conductivity of the material and provide more absorption sites. Moreover, the porous structure of NG-700 is conducive to entering of electrolyte and relieving volume expansion during cycling. In sodium-ion half-cells, the NG-700 electrode maintains 165 mA h g −1 for 10,000 cycles at 2 A g −1. In sodium-ion full-cells, the NG-700 anode can keep the capacity of 94 mA h g −1 for 200 cycles at 0.1 A g −1 paired with Na 3V 2(PO 4) 3 cathodes. Under severe environmental conditions (−25 °C), the electrode`s capacity retention rate is 50 %.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. A High-Performance Primary Nanosheet Heterojunction Cathode Composed of Na0.44MnO2 Tunnels and Layered Na2Mn3O7 for Na-Ion Batteries10.1002/cssc.201903543 ↗
2. Highly Efficient Co3O4/CeO2 Heterostructure as Anode for Lithium-Ion Batteries10.1016/j.jcis.2020.10.050 ↗
3. A Review of Lithium-Ion Battery Safety Concerns: The Issues, Strategies, and Testing Standards
4. One-Pot Template-Free Cross-Linking Synthesis of SiOx-SnO2@C Hollow Spheres as a High Volumetric Capacity Anode for Lithium-Ion Batteries10.1002/ente.202000314 ↗
5. Atomic Layer Deposition-Based Synthesis of TiO2 and Al2O3 Thin-Film Coatings on Nanoparticle Powders for Sodium-Ion Batteries with Enhanced Cyclic Stability10.1016/j.jallcom.2021.163113 ↗
6. Pillar-Free TiO2/Ti3C2 Composite with Expanded Interlayer Spacing for High-Capacity Sodium Ion Batteries10.1016/j.jpowsour.2020.227756 ↗
7. Nanoconfined Bimetallic Sulfides (CoSn)S Heterostructure in Carbon Microsphere as a High-Performance Anode for Half/Full Sodium-Ion Batteries10.1016/j.jcis.2021.12.021 ↗
8. Highly Dispersed Ultra-Small Nano Sn-SnSb Nanoparticles Anchored on N-Doped Graphene Sheets as High Performance Anode for Sodium Ion Batteries10.1016/j.apsusc.2020.145686 ↗
9. Understanding Na-Ion Adsorption in Nitrogen Doped Graphene Oxide Anode for Rechargeable Sodium Ion Batteries10.1016/j.apsusc.2021.152147 ↗
10. Effective Carbon Pores to Improve the Electrochemical Performance of Phosphorus as an Anode for Sodium Ion Batteries
11. Electrolyte/Structure-Dependent Cocktail Mediation Enabling High-Rate/Low-Plateau Metal Sulfide Anodes for Sodium Storage10.1007/s40820-021-00686-4 ↗
12. Nitrogen-Doped Graphene Coated FeS2 Microsphere Composite as High-Performance Anode Materials for Sodium-Ion Batteries Enhanced by the Chemical and Structural Synergistic Effect10.1016/j.apsusc.2019.144633 ↗
13. Influence of Carbon Characteristics on Sb/Carbon Nanocomposites Formation and Performances in Na-Ion Batteries10.1016/j.mtener.2019.05.009 ↗
14. Experimental Design and Theoretical Evaluation of Nitrogen and Phosphorus Dual-Doped Hierarchical Porous Carbon for High-Performance Sodium-Ion Storage10.1016/j.jmst.2020.11.014 ↗
15. A Novel Interlayer Expanded Tin Disulfide/Reduced Graphene Oxide Nanocomposite as Anode Material for High-Performance Sodium-Ion Batteries10.1016/j.jcis.2021.12.017 ↗
16. 2d–2d Mxene/ReS2 Hybrid from Ti3C2Tx Mxene Conductive Layers Supporting Ultrathin ReS2 Nanosheets for Superior Sodium Storage
17. One-Step Synthesis of Na–Sn Alloy with Internal 3d Na15Sn4 Support for Fast and Stable Na Metal Batteries
18. Nisb@Peo Hollow Nanospheres with Stabilized Structure for Improved Sodium Storage10.1002/admi.202101571 ↗
19. Rational Design of 3d Honeycomb-Like SnS2 Quantum Dots/Rgo Composites as High-Performance Anode Materials for Lithium/Sodium-Ion Batteries10.1186/s11671-018-2805-x ↗
20. Improving Na+ Transport Kinetics and Na+ Storage of Hierarchical Rhenium-Nickel Sulfide (ReS2@NiS2) Hollow Architecture by Assembling Layered 2d–3d Heterostructures10.1016/j.cclet.2021.04.011 ↗
21. Sodium-Ion Hybrid Capacitor of High Power and Energy Density10.1021/acscentsci.8b00437 ↗
22. O3-Type Na2/3Ni1/3Ti2/3O2 Layered Oxide as a Stable and High-Rate Anode Material for Sodium Storage10.1021/acsami.1c17554 ↗
23. Cost-Effective and Renewable Paper Derived Hard Carbon Microfibers as Superior Anode for Sodium-Ion Batteries10.1016/j.electacta.2020.137313 ↗
24. Amorphous Monodispersed Hard Carbon Micro-Spherules Derived from Biomass as a High Performance Negative Electrode Material for Sodium-Ion Batteries10.1039/C4TA05451B ↗
25. Electrochemical Intercalation of Sodium in Graphite10.1016/0167-2738(88)90351-7 ↗
26. M.M.M. Doeff, Y. Ma, S.J. Visco, L.C. Dejonghe, Electrochemical Insertion of Sodium into Carbon, J. Electrochem. Soc. 140 (1993) 169–170.10.1149/1.2221153 ↗
27. Expanded Biomass-Derived Hard Carbon with Ultra-Stable Performance in Sodium-Ion Batteries10.1039/C7TA07951F ↗
28. Insight into Sodium Insertion and the Storage Mechanism in Hard Carbon10.1021/acsenergylett.8b01761 ↗
29. Highly Purified Carbon Derived from Deashed Anthracite for Sodium-Ion Storage with Enhanced Capacity and Rate Performance10.1021/acs.energyfuels.0c03138 ↗
30. Extended Low-Voltage Plateau Capacity of Hard Carbon Spheres Anode for Sodium Ion Batteries10.1016/j.jpowsour.2020.228550 ↗
31. Facile Synthesis of Hard Carbon Microspheres from Polyphenols for Sodium-Ion Batteries: Insight into Local Structure and Interfacial Kinetics
32. Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications10.1021/nl3016957 ↗
33. Phosphorus-Doped Hard Carbon with Controlled Active Groups and Microstructure for High-Performance Sodium-Ion Batteries10.1039/D0TA06910H ↗
34. Hard Carbon Anode Materials for Sodium-Ion Batteries
35. Hard Carbon Originated from Polyvinyl Chloride Nanofibers as High-Performance Anode Material for Na-Ion Battery10.1021/acsami.5b00861 ↗
36. z.P.L. Ricardo Alcántara, Gregorio F. Ortiz, José L. Tirado, Study of the Reactivity of Na/Hard Carbon with Different Solvents and Electrolytes, J. Electrochem. Soc. 8 (2012) A222–A225.
37. Hard Carbon Anodes: Fundamental Understanding and Commercial Perspectives for Na-Ion Batteries Beyond Li-Ion and K-Ion Counterparts
38. Emerging Applications of Biochar-Based Materials for Energy Storage and Conversion10.1039/C9EE00206E ↗
39. S-Doped N-Rich Carbon Nanosheets with Expanded Interlayer Distance as Anode Materials for Sodium-Ion Batteries
40. Large-Area Carbon Nanosheets Doped with Phosphorus: A High-Performance Anode Material for Sodium-Ion Batteries10.1002/advs.201600243 ↗
41. A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries
42. MoSe2-Covered N, P-Doped Carbon Nanosheets as a Long-Life and High-Rate Anode Material for Sodium-Ion Batteries10.1002/adfm.201700522 ↗
43. Co3O4 Nanocrystals Coupled with O-and N-Doped Carbon Nanoweb as a Synergistic Catalyst for Hybrid Li-Air Batteries10.1016/j.nanoen.2014.10.036 ↗
44. K.A. Raj, M.R. Panda, D.P. Dutta, S. Mitra, Bio-Derived Mesoporous Disordered Carbon: An Excellent Anode in Sodium-Ion Battery and Full-Cell Lab Prototype, Carbon 143 (2019) 402–412.10.1016/j.carbon.2018.11.038 ↗
45. Carbon with Expanded and Well-Developed Graphene Planes Derived Directly from Condensed Lignin as a High-Performance Anode for Sodium-Ion Batteries10.1021/acsami.7b14776 ↗
46. Facile Hydrothermal Treatment Route of Reed Straw-Derived Hard Carbon for High Performance Sodium Ion Battery10.1016/j.electacta.2018.08.136 ↗
47. Waste-to-Wealth: Low-Cost Hard Carbon Anode Derived from Unburned Charcoal with High Capacity and Long Cycle Life for Sodium-Ion/Lithium-Ion Batteries10.1016/j.electacta.2020.137041 ↗
48. A Stable Biomass-Derived Hard Carbon Anode for High-Performance Sodium-Ion Full Battery
49. Sustainable Anodes for Lithium-and Sodium-Ion Batteries Based on Coffee Ground-Derived Hard Carbon and Green Binders
50. Hard Carbon Anode Derived from Camellia Seed Shell with Superior Cycling Performance for Sodium-Ion Batteries
51. High Capacity Hard Carbon Derived from Lotus Stem as Anode for Sodium Ion Batteries10.1016/j.jpowsour.2017.12.054 ↗
52. Honeycomb-Like Hard Carbon Derived from Pine Pollen as High-Performance Anode Material for Sodium-Ion Batteries10.1021/acsami.8b13160 ↗
53. Lithium and Sodium Storage in Highly Ordered Mesoporous Nitrogen-Doped Carbons Derived from Honey10.1016/j.jpowsour.2016.08.096 ↗
54. A Sustainable Route from Biomass Byproduct Okara to High Content Nitrogen-Doped Carbon Sheets for Efficient Sodium Ion Batteries10.1002/adma.201503221 ↗
55. Marine-Biomass-Derived Porous Carbon Sheets with a Tunable N-Doping Content for Superior Sodium-Ion Storage10.1021/acsami.8b14304 ↗
56. Hard Carbon Derived from Corn Straw Piths as Anode Materials for Sodium Ion Batteries10.1007/s11581-017-2260-1 ↗
57. Carbon Anode Materials for Advanced Sodium-Ion Batteries
58. Surface-driven Sodium Ion Energy Storage in Nanocellular Carbon Foams
59. Biomass-Derived Nitrogen/Oxygen Co-Doped Hierarchical Porous Carbon with a Large Specific Surface Area for Ultrafast and Long-Life Sodium-Ion Batteries10.1016/j.apsusc.2018.08.106 ↗
60. A Porous Biomass-Derived Anode for High-Performance Sodium-Ion Batteries10.1016/j.carbon.2017.12.103 ↗
61. Raman Spectrum of Graphite10.1063/1.1674108 ↗
62. Amorphous TiO2@NH2-MIL-125(Ti) Homologous MOF-Encapsulated Heterostructures with Enhanced Photocatalytic Activity10.1039/C7CC09072B ↗
63. Experiment and Theory of Low-Pressure Nitrogen Adsorption in Organic Layers Supported or Grafted on Inorganic Adsorbents: Toward a Tool to Characterize Surfaces of Hybrid Organic/Inorganic Systems10.1021/la301154e ↗
64. Biomass Derived Hard Carbon Used as a High Performance Anode Material for Sodium Ion Batteries10.1039/C4TA02068E ↗
65. Important Role of Functional Groups for Sodium Ion Intercalation in Expanded Graphite10.1021/acs.chemmater.5b02024 ↗
66. Ordered Mesoporous Alpha-MoO3 with Iso-Oriented Nanocrystalline Walls for Thin-Film Pseudocapacitors10.1038/nmat2612 ↗
67. K. Brezesinski, J. W., J. Haetge, C. Reitz, S.O. Steinmueller, S.H. Tolbert, B.M. Smarsly, B. Dunn, T. Brezesinski, Seudocapacitive Contributions to Charge Storage in Highly Ordered Mesoporous Group V Transition Metal Oxides with Iso-Oriented Layered Nanocrystalline Domains, J. Am. Chem. Soc. 132 (2009) 16982.10.1021/ja9106385 ↗