Carbon nanotubes based multi-directional strain sensor
Source abstract
Abstract
In this work a new carbon nanotubes (CNT) based multi-directional strain sensor capable of quantifying and indicate strain direction is foreseen. This work investigates the electromechanical behavior of an aligned CNT sensing patch strained at 45° in order to validate its multi-directional sensing capability. Vertically aligned CNT forests are produced by chemical vapor deposition (CVD) and then mechanically knocked down onto polyimide (PI) films. Two configurations, diamond (D sample) and square (Sq sample), are considered. The relative electrical resistance ( ΔR/R 0 ) and the electrical anisotropy ( R B /R A ) upon strain increments are analyzed and compared to previous work results (0° and 90° strain direction). Both 45° samples, D and Sq, are sensitive to strain. A correlation between electrical anisotropy behavior and strain direction (0°, 45° and 90°) is established. The results show that with only an aligned CNT small patch it is possible to quantify and indicate strain in three directions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Mechanical and Optical Resonators · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Flexible carbon nanotube films for high performance strain sensors10.3390/s140610042 ↗
2. Electrical and piezoresistive properties of multi-walled carbon nanotube/polymer composite films aligned by an electric field10.1016/j.carbon.2011.03.017 ↗
3. A carbon nanotube/polymer strain sensor with linear and anti-symmetric piezoresistivity10.1177/0021998310393296 ↗
4. Processing and characterization of MWCNTs / epoxy nanocomposites thin films for strain sensing applications10.1016/j.sna.2017.01.022 ↗
5. T. Xu, Q. Qiu, S. Lu, K. Ma, X. Wang, Multi-direction health monitoring with carbon nanotube film strain sensor, Int. J. Distrib. Sens. Networks. 15 (2019). https://doi.org/10.1177/1550147719829683.10.1177/1550147719829683 ↗
6. Aligned Carbon Nanotube Sheet Piezoresistive Strain Sensors10.1088/0964-1726/24/9/095004 ↗
7. Highly aligned, anisotropic carbon nanofiber films for multidirectional strain sensors with exceptional selectivity10.1002/adfm.201901623 ↗
8. Aligned carbon nanotube based sensors for strain sensing applications10.1016/j.sna.2019.02.026 ↗
9. Impact of carbon nanotube length on electron transport in aligned carbon nanotube networks10.1063/1.4907608 ↗
10. Strain-dependent electrical resistance of multi-walled carbon nanotube/polymer composite films10.1088/0957-4484/19/05/055705 ↗
11. Note on four-point resistivity measurements on anisotropic conductors
12. Van Der Pauw method for measuring resistivities of anisotropic layers printed on textile substrates10.1177/0040517511416280 ↗
13. Uniaxial stretching-induced alignment of carbon nanotubes in cross-linked elastomer enabled by dynamic cross-link reshuffling10.1021/acsmacrolett.9b00836 ↗