journal article·2022-10

High performance humidity sensor based on crystalline copper tungstate nanoparticles at room temperature

Urmila Patil, Lina Khandare, Dattatray J. Late

Publisher page

Abstract

This work demonstrates the synthesis and fabrication of Copper tungstate (CuWO 4) nanoparticles-based humidity sensor. The as synthesized sample was characterized by X-ray diffraction, Raman spectroscopy, photoluminescence and high resolution transmission electron microscopy to study structural and morphological nature. The humidity sensing performance of CuWO 4 nanoparticles based sensor device was tested at room temperature which was exposed to 11%-97% relative humidity levels. The sensitivity of the device was found to be ∼767 at 97% relative humidity level. The CuWO 4 nanoparticles sensing device showed ultra-low response and recovery time of ∼39 sec and ∼18 sec respectively. The high sensitivity and response/recovery was likely due to the high adsorption energy, fast charge transfer rate and low bonding energy of water molecules with CuWO 4 nanoparticles. Our results indicate that CuWO 4 nanoparticles-based humidity sensor device has great promising application as a portable device for control humidity detection.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Semiconductor metal oxide gas sensors: A review10.1016/j.mseb.2017.12.036 ↗
2. Metal-oxide semiconductors for carbon monoxide (CO) gas sensing: A review
3. M. Al-Hashem, S. Akbar, P. Morris, Role of oxygen vacancies in nanostructured mmetal-oxide gas sensors: A Review, Sens. Actuators B Chem. 301 (2019) 126845. https://doi.org/10.1016/j.snb.2019.126845.10.1016/j.snb.2019.126845 ↗
4. 1D Metal Oxide Semiconductor Materials for Chemiresistive Gas Sensors: A Review10.1002/aelm.202100271 ↗
5. Nanocomposites of transition metals tungstate for potential applications in magnetic and microwave devices10.1007/s10832-018-0130-5 ↗
6. Photocatalytic activity and humidity sensor studies of magnetically reusable FeWO4-WO3 composite nanoparticles10.1166/jnn.2019.15565 ↗
7. Silver tungstate nanoparticles for the detection of ethanol, ammonia and acetone gases10.1007/s11664-018-6551-8 ↗
8. Fabrication and electrochemical investigation of MWO4 (M = Co, Ni) nanoparticles as high-performance anode materials for lithium-ion batteries10.1007/s11581-017-2200-0 ↗
9. Chemical Stability of CuWO4 for Photoelectrochemical Water Oxidation
10. L. Wang, A.U. Rehman, H. Wu, B. Wu, L. Li, K. Shi, Submicrochains composed of massage ball-like WO3@CuWO4 composites for high-efficiency CO gas sensing applications at room temperature, RSC Adv. 6 (2016) 69999. https://doi.org/10.1039/C6RA12589A.10.1039/C6RA12589A ↗
11. Submicrochains composed of massage ball-like WO3@CuWO4 composites for high-efficiency CO gas sensing applications at room temperature10.1039/C6RA12589A ↗
12. Copper tungstate thin-films for nitric oxide sensing10.1016/j.snb.2012.06.067 ↗
13. C. Zhi, L. Chi, Humidity Sensors: A Review of Materials and Mechanisms, Sens. Lett. 3 (2005) 274–295.10.1166/sl.2005.045 ↗
14. High-Sensitivity Humidity Sensor Based on a Single SnO2 Nanowire10.1021/ja070788m ↗
15. Preparation of semiconductor ZnO powders by sol–gel method: Humidity sensors10.1016/j.sna.2012.11.031 ↗
16. Highly sensitive mos2 humidity sensors array for noncontact sensation10.1002/adma.201702076 ↗
17. J. Ravindra Kumar, G. Prasanta Kumar, Liquid exfoliated pristine WS2 nanosheets for ultrasensitive and highly stable chemiresistive humidity sensors, Nanotechnology 27 (2016) 475503. doi:10.1088/0957-4484/27/47/475503.10.1088/0957-4484/27/47/475503 ↗
18. Mechanisms of humidity sensing on a CdS nanoparticle coated paper sensor10.1016/j.sna.2018.11.034 ↗
19. 2D layered Mn and Ru oxide nanosheets for real-time breath humidity monitoring10.1016/j.apsusc.2021.151481 ↗
20. An ingenious strategy for improving humidity sensing properties of multiwalled carbon nanotubes via poly-L-lysine modification10.1016/j.snb.2019.03.070 ↗
21. A fabrication process of flexible IDE capacitive chemical sensors using a twostep lift-off method based on PVA patterning10.1016/j.snb.2018.12.095 ↗
22. Super-fast response humidity sensor based on La0.7Sr0.3MnO3 nanocrystals prepared by PVP-assisted sol-gel method10.1016/j.snb.2017.11.169 ↗
23. D. Zhang, D. Wang, P. Li, X. Zhou, X. Zong, G. Dong, Facile fabrication of high-performance QCM humidity sensor based on layer-by-layer self-assembled polyaniline/graphene oxide nanocomposite film, Sens. Actuators B 255 (2018) 1869–1877. https://doi.org/10.1016/j.snb.2017.08.212.10.1016/j.snb.2017.08.212 ↗
24. Facile development of high performance QCM humidity sensor based on protonated polyethylenimine-graphene oxide nanocomposite thin film10.1016/j.snb.2016.01.105 ↗
25. Photonic crystal fiber interferometer coated with a PAH/PAA nanolayer as humidity sensor10.1016/j.snb.2016.09.144 ↗
26. Two-DimensionalNanostructured Materials for Gas Sensing10.1002/adfm.201702168 ↗
27. A Highly Sensitive and Stable rGO:MoS2-Based Chemiresistive Humidity Sensor Directly Insertable to Transformer Insulating Oil Analyzed by Customized Electronic Sensor Interface10.1021/acssensors.0c02219 ↗
28. High-Performance Humidity Sensor Based on the Graphene Flower/Zinc Oxide Composite10.3390/nano11010242 ↗
29. Fabrication and Materials Integration of Flexible Humidity Sensors for Emerging Applications10.1021/acsomega.0c06106 ↗
30. Ultra-fast α-MoO3 nanorod-based Humidity sensor10.1080/20550308.2016.1221605 ↗
31. Polyimide-Based Capacitive Humidity Sensor10.3390/s18051516 ↗
32. Nanocomposite Structures and Dispersions Science and Nanotechnology - Fundamental Principles and Colloidal Particles (Studies in Interface Science, Capek I, Elsevier Science 23, (2006), ISBN-13 : 978-0444527165.
33. Enhanced electrochemical properties of silver-coated zirconia nanoparticles for supercapacitor application10.1080/16583655.2020.1867338 ↗
34. Facile construction of mesoporous carbon enclosed with NiCoPx nanoparticles for desirable Pt-based catalyst support in methanol oxidation10.1016/j.jpowsour.2020.228888 ↗
35. Surface modification of β-Ga2O3 layer using pt nanoparticles for improved deep UV photodetector performance10.1016/j.jallcom.2021.159508 ↗
36. In-situ growth of Co3O4 nanoparticles based on electrospray for an acetone gas sensor10.1016/j.jallcom.2020.157234 ↗
37. Humidity Sensors Principle, Mechanism, and Fabrication Technologies: A Comprehensive Review10.3390/s140507881 ↗
38. V.K. Tomer, R. Malik, V. Chaudhary, A. Baruah, L. Kienle, Noble Metals-Metal Oxide Mesoporous Nanohybrids in Humidity and Gas Sensing Applications, (2019) 283–302. https://doi.org/10.1016/B978-0-12-814134-2.00014-0.10.1016/B978-0-12-814134-2.00014-0 ↗
39. Y. Liu, X. Li, X. Li, C. Shao, C. Han, J. Xin, D. Lu, L. Niu, Y. Tang, Y. Liu, Sens. Actuators B: Chem. 365 (2022) 131926. https://doi.org/10.1016/j.snb.2022.131926.10.1016/j.snb.2022.131926 ↗
40. Visible-light sensitization of anodic tungsten oxide layers with CuWO410.1016/j.electacta.2020.137591 ↗
41. S.M. Pourmortazavi, M. Rahimi-Nasrabadi, M.R. Ganjali, Meisam, SadeghpourKarimi, P. Norouzi, F. Faridbod, Facile and effective synthesis of praseodymium tungstate nanoparticles through an optimized procedure and investigation of photocatalytic activity, J. InorgOrganometPolym 15 (2017) 129. doi: 10.1515/chem-2017-0014.10.1515/chem-2017-0014 ↗
42. Synthesis and characterization of CuWO4 nanoparticle and CuWO4/ NiO nanocomposite using co-precipitation method; application in photodegradation of organic dye in water
43. Highly Transparent Wafer-Scale Synthesis of Crystalline WS2 Nanoparticle Thin Film for Photodetector and Humidity-Sensing Applications10.1021/acsami.5b11325 ↗
44. M. Zhong, Z. Wei, X. Meng, F. Wua, J. Li, Ultra-sensitive humidity sensors based on ZnSb2O4 nanoparticles, RSC Adv. 5 (2015) 2429–2433. doi: https://doi.org/10.1039/C4RA13398F.10.1039/C4RA13398F ↗
45. ZnO Nanotetrapods: Controlled Vapor-Phase synthesis and application for humidity sensing10.1002/adfm.200601128 ↗
46. Synthesis, characterization and humidity sensing properties of Sr(II)-added BaAl2O4 composites10.1016/j.snb.2007.01.018 ↗
47. Comparative study on micromorphology and humidity sensitive properties of thick film and disc humidity sensors based on semiconducting SnWO4–SnO2 composites10.1016/j.snb.2007.01.005 ↗
48. Humidity-sensing properties of ZnCr2O4–ZnO composites10.1016/S0167-577X(03)00122-8 ↗
49. Effect of BaTiO3 on the sensing properties of PVDF composite-based capacitive humidity sensors10.1016/j.ceramint.2019.09.291 ↗
50. Recent advances in the concept of hard and soft acids and bases10.1021/ed064p561 ↗
51. Impedimetric humidity sensor based on α-Fe2O3 nanoparticles10.1080/20550308.2015.1133101 ↗