journal article·2021-04

Plastic response of open cell aluminum foams of highly uniform architecture under different quasi-static combined biaxial compression-torsion loading paths

A. Abdul–Latif, A. Menouer, R. Baleh, I.M. Deiab

Publisher page

Abstract

Abstract The aim of this new experimental work was to understand the effect of loading biaxial combined compression-torsion complexity on the plastic response of three aluminum foams having porosities of 93%, 85% and 78% and nominal relative densities of 7%, 15% and 22%, respectively. An investigation was made of the biaxial plastic response of these open-cell foams, which have a highly uniform architecture with a spherical porosity. These foams were tested under quasi-static complex loading paths using a patented rig, called ACTP. Biaxial combined compression-torsion loading paths were then applied with different torsional component rates. The key responses to be examined were yield stress, stress plateau, energy absorption capacity, and densification strain. It was revealed that the greater the density of the foam, the higher the loading complexity, and the greater the yield strength and the energy absorption capacity. The highest foam strength was thus recorded under the most complicated loading path (i.e., biaxial 60°) for the densest foam (i.e., 78% porosity). However, the foam with a porosity of 93% demonstrated a lower strength under biaxial loading compared to its uniaxial response. This was due to its small cell wall thickness, which was easily damaged. The effect of the loading complexity on the pore closure mechanism of the deformed foams was studied using an image analysis that targeted the axial and the transverse sections. For the 85% and 78% foams, the loading complexities of biaxial-37° and biaxial-45° provided the highest pore closure compared to the other loading complexities. This analysis supported the interpretation of the densification strain results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. T. Miyoshi, M. Itoh, S. Akiyama, A. Kitahara, 1998, “Porous and Cellular Materials for Structural Applications,” ed. D. S. Schwartz, D. S. Shih, A. G. Evans and H. N. G. Wadley. MRS, San Francisco, p. 133.
2. L. Ma, Z. Song, Cellular structure control of aluminium foaming process of aluminium melt, Scripta Mater., 39, pp. 1523-1528.10.1016/S1359-6462(98)00361-3 ↗
3. Aluminum foams produced by liquid-state processes10.1016/S1359-6454(98)00017-2 ↗
4. The FORMGRIP process: Foaming of reinforced metals by gas release in precursors10.1002/(SICI)1527-2648(200004)2:4<175::AID-ADEM175>3.0.CO;2-W ↗
5. V. Gergely, H.P. Degischer, T.W. Clyne, 2000, “Metal Matrix Composites,” Comprehensive Composite Materials, vol. 3, ed. T. W. Clyne. Elsevier, Amsterdam, 2000, p. 797.10.1016/B0-08-042993-9/00205-9 ↗
6. The effect of structural defects on the compressive behavior of closed-cell Al foam10.1016/j.actamat.2005.04.010 ↗
7. Effect of density, microstructure, and strain rate on compression behavior of polymeric foams10.1016/j.msea.2005.07.006 ↗
8. On the plastic collapse stress of open-cell aluminum foam10.1016/j.scriptamat.2008.05.025 ↗
9. The microstructural origin of strain hardening in two-dimensional open-cell metal foams10.1016/j.ijsolstr.2010.04.009 ↗
10. Size effects in foams: experiments and modelling10.1016/j.pmatsci.2010.06.001 ↗
11. Propagation of compaction waves in metal foams exhibiting strain hardening10.1016/j.ijsolstr.2012.03.012 ↗
12. High strain rate behavior of composite metal foams10.1016/j.msea.2015.02.027 ↗
13. Gibson · 1997
14. Effect of cell morphology on the compressive properties of open-cell aluminum foams10.1016/S0921-5093(00)00623-7 ↗
15. Effect of microstructural topology upon the stiffness and strength of 2D cellular structures10.1016/S0020-7403(02)00171-6 ↗
16. Dynamic crushing of 2D cellular structures: a finite element study10.1016/j.ijimpeng.2005.05.007 ↗
17. Structure and properties of Al–SiC foam10.1016/0921-5093(94)09708-9 ↗
18. On the mechanical performance of closed cell foams10.1016/S1359-6454(97)00148-1 ↗
19. Density gradient effects on aluminium foam compression behaviour10.1023/A:1018670111305 ↗
20. W. Sanders, L.J. Gibson, in Porous and Cellular Materials for Structural Applications, ed. D. S. Schwartz, D. S. Shih, A. G. Evans and H. N. G. Wadley. MRS, San Francisco, 1998, p. 53.
21. Compressive and tensile behaviour of aluminum foams10.1016/S0921-5093(99)00170-7 ↗
22. The mechanical behavior of foamed aluminum10.1023/A:1004401521842 ↗
23. Lightweight cellular metal
24. Deformation of open-cell aluminum foam10.1016/S1359-6454(01)00294-4 ↗
25. Permeability of open-pore microcellular materials10.1016/j.actamat.2004.11.031 ↗
26. Uniaxial deformation of microcellular metals10.1016/j.actamat.2006.03.054 ↗
27. Aluminium foam - A new light-weight structural material
28. F. Simancik, J. Kovacik, N. Minarikova, 1998, Proc. PM World Congress, Porous Metals, Granada, Spain, p. 245.
29. Effect of imperfections on the yielding of two-dimensional foams10.1016/S0022-5096(99)00030-7 ↗
30. Experimental studies on the yield behavior of ductile and brittle aluminum foams10.1016/S0749-6419(02)00017-7 ↗
31. The effect of cell wall microstructure on the deformation and fracture of aluminium-based foams10.1016/S1359-6454(01)00072-6 ↗
32. The mechanical behaviour of aluminium foam structures in different loading conditions10.1016/j.ijimpeng.2007.02.007 ↗
33. Size effects in ductile cellular solids. Part II: experimental results10.1016/S0020-7403(00)00043-6 ↗
34. Redefining the concept of stress-strain curves for foams
35. Ashby · 2000
36. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
37. Validation of constitutive models applicable to aluminium foams10.1016/S0020-7403(01)00091-1 ↗
38. Strain-rate effects in Ni/Al composite metal foams from quasi-static to low-velocity impact behaviour10.1016/j.compositesa.2016.02.031 ↗
39. The influence of strain-induced damage on the mechanical response of open-cell aluminum foam10.1016/j.actamat.2007.10.034 ↗
40. Ductile fracture of two-dimensional cellular structures10.1023/A:1012248030212 ↗
41. Effect of lateral constraint on the mechanical properties of a closed-cell Al foam: I. Experiments10.1007/s11661-007-9245-z ↗
42. Effect of lateral constraint on the mechanical properties of a closed-cell Al foam: II. Strain-hardening models10.1007/s11661-007-9213-7 ↗
43. Strain hardening during constrained deformation of metal foams – effect of shear displacement10.1016/j.scriptamat.2009.06.023 ↗
44. Experimental study of energy absorption in a closed-celled aluminium foam under dynamic loading10.1016/S1359-6462(99)00038-X ↗
45. High strain rate compression of closed-cell aluminium foams10.1016/S0921-5093(00)01219-3 ↗
46. Strain rate sensitivity of a closed-cell aluminum foam10.1016/S0921-5093(99)00750-9 ↗
47. Dynamic compression of an ultra-low density aluminium foam
48. The strain rate effect of an open cell aluminum foam10.1007/s11661-005-0180-6 ↗
49. Dynamic compressive behaviour of cellular materials: a review of phenomenon, mechanism and modelling10.1016/j.ijimpeng.2017.10.006 ↗
50. High strain rate compression of closed-cell aluminium10.1016/S0921-5093(00)01219-3 ↗
51. Isotropic constitutive models for metallic foams10.1016/S0022-5096(99)00082-4 ↗
52. High strain rate compressive behaviour of aluminium alloy foams10.1016/S0734-743X(99)00153-0 ↗
53. Crushing of aluminum closed cell foams: density and strain rate effects10.1016/S1359-6462(00)00460-7 ↗
54. The deformation of aluminium foams10.1007/BF02658535 ↗
55. Mechanical behavior of steel and aluminum foams at elevated temperatures. Local buckling based approach toward understanding of the material system behavior10.1016/j.ijmecsci.2020.105754 ↗
56. Failure of aluminium foams under multiaxial loads10.1016/S0020-7403(99)00043-0 ↗
57. Mechanisms and mechanics of compressive deformation in open-cell Al foams10.1016/j.mechmat.2003.05.004 ↗
58. Loading rate effect on yield surface of aluminum alloy foams10.1016/j.msea.2012.02.074 ↗
59. Experimental determination of the mechanical effects of mass density gradient in metallic foams under large multiaxial inelastic deformation10.1016/j.mechmat.2005.09.002 ↗
60. Dynamic mechanical behavior of syntactic iron foams with glass microspheres10.1016/j.msea.2012.05.053 ↗
61. Uniaxial and biaxial failure behaviors of aluminium alloy foams10.1016/j.compositesb.2013.01.004 ↗
62. Drop weight impact behavior of functionally graded aluminum foam consisting of A1050 and A6061 aluminum alloys10.1016/j.msea.2015.05.007 ↗
63. Sesqui-power scaling of plateau strength of closed-cell foams10.1016/j.msea.2013.05.047 ↗
64. Variation of quasi-static and dynamic compressive properties in a single aluminium foam block10.1016/j.msea.2014.08.002 ↗
65. Deformation behavior of open-cell stainless steel foams10.1016/j.msea.2014.07.098 ↗
66. Influence of curved struts, anisotropic pores and strut cavities on the effective elastic properties of open-cell foams10.1016/j.mechmat.2015.02.012 ↗
67. Failure surfaces of cellular materials under multiaxial loads–I. Modelling10.1016/S0020-7403(89)80001-3 ↗
68. Yield surface of polyurethane and aluminium replicated foam10.1016/j.actamat.2010.05.053 ↗
69. Multiaxial yield behaviour of Al replicated foam10.1016/j.jmps.2011.05.015 ↗
70. Investigations on the yield behavior of metal foam under multiaxial loadings by an imaged-based mesoscopic model10.1016/j.ijmecsci.2018.04.041 ↗
71. Characterization of initial and subsequent yield behaviors of closed-cell aluminum foams under multiaxial loadings10.1016/j.compositesb.2020.108247 ↗
72. Biaxial mechanical behavior of closed-cell aluminum foam under combined shear—compression loading10.1016/S1003-6326(19)65178-2 ↗
73. Multiscale microsphere modelling of open-cell metal foams enriched by statistical analysis of geometric parameters10.1016/j.mechmat.2019.103295 ↗
74. Initial yield behaviour of closed-cell aluminium foams in biaxial loading10.1016/j.ijmecsci.2020.106063 ↗
75. A. Abdul-Latif, R. Baleh, 2005, “Shock Absorbing Device Comprising a Plastically-Deformable Member,” INPI, (Institut National de la Propriété Industrielle) (PCT/FR05/00391) in France and expanded internationally under (WO 2005090822).
76. Dynamic biaxial plastic buckling of circular shells10.1115/1.2839686 ↗
77. Uniaxial-biaxial transition in quasi-static plastic buckling used as an energy absorber10.1115/1.2424470 ↗
78. New generation of energy dissipating systems based on biaxial buckling10.1016/j.tws.2014.09.015 ↗
79. Alvéotec, http://www.alveotec.fr/en/.
80. Mechanical behaviour of metallic forms10.1146/annurev.matsci.30.1.191 ↗
81. Microstructure analysis of aluminum alloy and copper alloy circular shells after multiaxial plastic buckling10.1007/s11665-008-9216-6 ↗