Nickel-cobalt manganate supported on reduced graphene oxide/carbon nanotube for improving air cathode performance in single chamber microbial fuel cell
Source abstract
Abstract
Abstract In this paper, a hybrid electrocatalyst of nickel-cobalt manganite supported on reduced graphene oxide/carbon nanotube (NCMO/rGO/CNT) was prepared by hydrothermal method and its effect on the performance of a single chamber microbial fuel cell (SCMFC) was investigated. Characterization techniques confirmed the synthesis of spinel nanoparticles, their uniform distribution on carbon nanostructures, and the presence of CNT bridges across rGO nanosheets. The electrochemical studies indicate the dominance of the four-electron transfer pathway in ORR (n = 3.80). The maximum power density (Pmax) of the electrocatalytic modified membrane-electrode assembly (MEA) studied by an SCMFC-simulating half-cell (15.64 W.m−2) was approximately 11 times higher than that of the blank half-cell (1.38 W.m−2). The Pmax of the SCMFC modified by NCMO/rGO/CNT was 1.186 W.m−2, which was 7.65 times higher than that of blank fuel cell. The results suggest NCMO/rGO/CNT as an excellent electrocatalyst for SCMFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Electrochemical property, antioxidant activities, water treatment and solar cell applications of titanium dioxide – zinc oxide hybrid nanocomposite based on graphene oxide nanosheet10.1016/j.mseb.2020.114596 ↗
2. Development of poly(vinyl alcohol) (PVA)-based sodium ion conductors for electric double-layer capacitors application
3. Green and facile synthesis of iron oxide nanoparticle-embedded N-doped biocarbon as an efficient oxygen reduction electrocatalyst for microbial fuel cells10.1016/j.cej.2019.123393 ↗
4. Microbial electrochemical technologies with the perspective of harnessing bioenergy: Maneuvering towards upscaling10.1016/j.rser.2015.08.058 ↗
5. E. Tamboli, J. S. Eswari, Microbial Electrochemical Technology: In Biomass, Biofuels and Biochemicals, Chapter 3.2 – Microbial Fuel Cell Configurations: An Overview, Elsevier, 2019, 407–435.10.1016/B978-0-444-64052-9.00016-9 ↗
6. Low-cost Fe–N–C catalyst derived from Fe (III)-chitosan hydrogel to enhance power production in microbial fuel cells10.1016/j.cej.2019.122522 ↗
7. Activated carbon-supported multi-doped graphene as high-efficient catalyst to modify air cathode in microbial fuel cells10.1016/j.electacta.2019.02.094 ↗
8. Platinum group metal-free catalysts for oxygen reduction reaction: applications in microbial fuel cells10.3390/catal10050475 ↗
9. Improved oxygen reduction reaction in PEMFCs by functionalized CNTs supported Pt–M (M = Fe, Ni, Fe–Ni) bi- and tri-metallic nanoparticles as efficient electrocatalyst10.1016/j.ijhydene.2020.06.179 ↗
10. Transition metals (Co, Mn, Cu) based composites as catalyst in microbial fuel cells application: the effect of catalyst composition10.1016/j.cej.2019.123152 ↗
11. Electrophoretically fabricated nickel/nickel oxides as cost effective nanocatalysts for the oxygen reduction reaction in air-cathode microbial fuel cell10.1016/j.ijhydene.2019.05.091 ↗
12. zadirachta indica leaf-extract-assisted synthesis of CoO–NiO mixed metal oxide for application in a microbial fuel cell as a cathode catalyst, Sustainable
13. Low-cost nanowired α-MnO2/C as an ORR catalyst in air-cathode microbial fuel cell10.1016/j.bioelechem.2018.09.004 ↗
14. CoMn2O4 doped reduced graphene oxide as an effective cathodic electrocatalyst for ORR in microbial fuel cells10.1016/j.electacta.2018.11.004 ↗
15. Potential of core-shell NiFe layered double hydroxide@Co3O4 nanostructures as cathode catalysts for oxygen reduction reaction in microbial fuel cells10.1016/j.jpowsour.2020.227877 ↗
16. The performance of nano urchin-like NiCo2O4 modified activated carbon as air cathode for microbial fuel cell10.1016/j.jpowsour.2015.11.003 ↗
17. Ordered crystalline mesoporous oxides as catalysts for CO oxidation10.1007/s10562-009-9931-0 ↗
18. M. Liu, L. Wang, Y. Mu, J. Ma, Y. Zhao, Y. Wang, X. Lai, Jian Bi, D. Gao, A novel NiCoMnO4 anode material: construction of nanosheet architecture and superior electrochemical performances, Scripta Mater., 146 (2018) 13–17.10.1016/j.scriptamat.2017.10.030 ↗
19. NiCoMnO4 nanoparticles on N-doped graphene: Highly efficient bifunctional electrocatalyst for oxygen reduction/evolution reactions10.1016/j.apcatb.2016.08.044 ↗
20. High electricity generation and COD removal from cattle wastewater in microbial fuel cells with 3D air cathode employed non-precious Cu2O/reduced graphene oxide as cathode catalyst10.1016/j.energy.2020.117123 ↗
21. Cobalt oxides nanoparticles supported on nitrogen-doped carbon nanotubes as high-efficiency cathode catalysts for microbial fuel cells10.1016/j.inoche.2019.04.036 ↗
22. Ultrasonic assisted synthesis of Ni3(VO4)2-reduced graphene oxide nanocomposite for potential use in electrochemical energy storage10.1016/j.ultsonch.2019.104869 ↗
23. Sonochemical assisted synthesis of manganese–nickel molybdate/reduced graphene oxide nanohybrid for energy storage10.1016/j.jallcom.2020.155665 ↗
24. Deposition of Ni-NiO nanoparticles on the reduced graphene oxide filled polypyrrole: evaluation as cathode catalyst in microbial fuel cells, Sustainable
25. Enhanced bioelectricity generation and cathodic oxygen reduction of air breathing microbial fuel cells based on MoS2 decorated carbon nanotube10.1016/j.ijhydene.2019.04.040 ↗
26. Bimetallic metal-organic frameworks derived cobalt nanoparticles embedded in nitrogen-doped carbon nanotube nanopolyhedra as advanced electrocatalyst for high-performance of activated carbon air-cathode microbial fuel cell10.1016/j.bios.2018.12.028 ↗
27. W.S. Hummers, R.E. Offeman, Preparation of graphitic oxide. J. Am. Chem. Soc., 80 (1958) 1339–1339.10.1021/ja01539a017 ↗
28. Investigation of hot pressing parameters for manufacture of catalyst-coated membrane electrode (CCME) for polymer electrolyte membrane fuel cells by response surface method10.1016/j.energy.2017.08.049 ↗
29. Logan · 2007
30. Solar water splitting: preserving the beneficial small feature size in porous α-Fe2O3 photoelectrodes during annealing10.1039/C2TA00431C ↗
31. Iron-nitrogen-activated carbon as cathode catalyst to improve the power generation of single-chamber air-cathode microbial fuel cells10.1016/j.biortech.2016.01.112 ↗
32. A. J. Bard, L. R. Faulkner. Electrochemical Methods: Fundamentals and Applications. New York: J. Wiley and Sons; 2000.
33. T. D. Wickins, infrared and Raman Spectra of Metal – Oxygen Complexes, London: University of London;1967.
34. Different strategies to simultaneously N-doping and reduce graphene oxide for electrocatalytic applications10.1016/j.jelechem.2019.113695 ↗
35. Electrochemical sensors based on nitrogen-doped reduced graphene oxide for the simultaneous detection of ascorbic acid, dopamine and uric acid10.1016/j.jallcom.2020.155873 ↗
36. Novel NiCoMnO4 thermocatalyst for low-temperature catalytic degradation of methylene blue
37. Facile synthesis of NiCoMnO4 nanoparticles as novel electrode material for high performance asymmetric energy storage devices10.1039/C6RA00960C ↗
38. Preparation and characterization of nickel ferrite nano particles by co-precipitation method with citrate as chelating agent
39. One step hydrothermal synthesis of TiO2-reduced graphene oxide sheets10.1039/c0jm03542d ↗
40. Mechanically robust biocomposite films of chitosan grafted carbon naotubes via the [2+1] cycloaddition of nitrenes10.1039/c3ra41990h ↗
41. Synthesis, characterization and photoluminescence properties of tetra(aminophenyl) porphyrin covalently linked to multi-walled carbon nanotubes10.1007/s12039-017-1295-1 ↗
42. Fabrication of hierarchical flower-like super-structures consisting of porous NiCo2O4 nanosheets and their electrochemical and magnetic properties10.1039/c3ra23084h ↗
43. A practical carbon dioxide gas sensor using room-temperature hydrogen plasma reduced graphene oxide10.1016/j.snb.2013.12.017 ↗
44. MnNiCoO4/N-MWCNT nanocomposite catalyst with high selectivity in membraneless direct formate fuel cells and bifunctional activity for oxygen electrochemistry10.1039/C4CY01702A ↗
45. Polyoxomolybdate anchored graphite oxide: Noble metal-free electrocatalyst for oxygen reduction reaction10.1016/j.ijhydene.2019.07.180 ↗
46. Study of proton exchange membrane fuel cells using electrochemical impedance spectroscopy technique – a review10.1016/j.jpowsour.2013.04.011 ↗
47. Bio-electrochemical characterization of air-cathode microbial fuel cells with microporous polyethylene/silica membrane as separator10.1016/j.bioelechem.2015.05.016 ↗
48. Microwave irradiated Ni–MnOx/C as an electrocatalyst for methanol oxidation in KOH solution for fuel cell application10.1016/j.apsusc.2015.08.201 ↗
49. A facile method prepared nitrogen and boron doped carbon nano-tube based catalysts for oxygen reduction10.1016/j.ijhydene.2017.01.134 ↗
50. Surface-oxidized cobalt phosphide used as high efficient electrocatalyst in activated carbon air-cathode microbial fuel cell10.1016/j.jpowsour.2017.06.088 ↗
51. Tubular nitrogen-doped carbon materials derived from green foxtail as a metal-free electrocatalyst in microbial fuel cells for efficient electron generation10.1016/j.bioelechem.2019.01.009 ↗