Pure sulfide Cu2ZnSnS4 layers through a one-step low-temperature PLD technique: Insight into simulation on modified back contact to overcome the barrier of MoS2
Source abstract
Abstract
Abstract Targeting on the selenium free, pure sulfide kesterite compound (CZTS) allows retention of the higher band gap nontoxic absorber for a single-junction solar cell. In this work, CZTS thin films were deposited by the PLD method and the Structural/optical properties, as well as Mott–Schottky analysis, were studied at different substrate temperatures. Without undergoing the sulfurization process, the single-phase CZTS thin film is prepared at 300 ℃. In the second step, a numerical simulation is performed using the solar cell capacitance simulator to study the effect of the grading layer of MoS(Se)2 on the rear side of pure sulfide kesterite based solar cells. The device with a MoSe2 coated substrate exhibits better performance in comparison with the soda-lime-glass (SLG)/Mo that is susceptible to the formation of an n-type MoS2 intermediate layer. An improvement in conversion efficiency from 5.4% to 13.99%, often due to an increase of open-circuit voltage has been reached.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. Progress and perspectives of thin film kesterite photovoltaic technology: a critical review10.1002/adma.201806692 ↗
2. Analysis of failure modes in kesterite solar cells10.1021/acsaem.8b00194 ↗
3. Characterization of polysaccharides having activity on the reticuloendothelial system from the rhizome of Curcuma longa10.1248/cpb.38.482 ↗
4. The steady rise of kesterite solar cells10.1021/acsenergylett.7b00131 ↗
5. Physical routes for the synthesis of kesterite10.1088/2515-7655/ab281c ↗
6. Recent progress in solution-processed copper-chalcogenide thin-film solar cells10.1002/ente.201700734 ↗
7. Role of contact work function, back surface field, and conduction band offset in Cu2ZnSnS4 solar cell10.7567/JJAP.57.08RC05 ↗
8. Beyond 11% efficient sulfide kesterite Cu 2 Zn x Cd 1–x SnS 4 solar cell: effects of cadmium alloying10.1021/acsenergylett.7b00129 ↗
9. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
10. The generalized Shockley-Queisser limit for nanostructured solar cells10.1038/srep13536 ↗
11. Photovoltaic materials: present efficiencies and future challenges10.1126/science.aad4424 ↗
12. Pathways for solar photovoltaics10.1039/C4EE04073B ↗
13. Solar cell efficiency tables (Version 53)10.1002/pip.3102 ↗
14. Strategic review of interface carrier recombination in earth abundant Cu–Zn–Sn–S–Se solar cells: current challenges and future prospects10.1039/C6TA10543B ↗
15. Enhancing open-circuit voltage of solution-processed Cu2ZnSn(S,Se)4 solar cells with Ag substitution10.1109/JPHOTOV.2017.2675993 ↗
16. Boost Voc of pure sulfide kesterite solar cell via a double CZTS layer stacks10.1016/j.solmat.2016.09.027 ↗
17. Efficient kesterite solar cells with high open-circuit voltage for applications in powering distributed devices10.1038/s41560-017-0028-5 ↗
18. F. Liu, J. Huang, K. Sun, C. Yan, Y. Shen, J. Park, A. Pu, F. Zhou, X. Liu, J.A. Stride, M.A. Green, X. Hao, Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact, NPG Asia Mater. 9 (2017) e401–e401. doi: 10.1038/am.2017.103.10.1038/am.2017.103 ↗
19. Back contact effect on electrodeposited CZTS kesterite thin films experimental and numerical investigation10.1016/j.solener.2019.11.017 ↗
20. Phase evolution pathways of kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 thin films during the annealing of sputtered Cu-Sn-Zn metallic precursors10.1016/j.solener.2016.09.043 ↗
21. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
22. Cu2ZnSn(S, Se)4 from annealing of compound co-sputtered precursors – Recent results and open questions10.1016/j.solener.2018.04.024 ↗
23. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS–Se solar cells10.1039/C5EE02153G ↗
24. All solution-processed chalcogenide solar cells – from single functional layers towards a 13.8% efficient CIGS device10.1002/adfm.201402288 ↗
25. Controllable multinary alloy electrodeposition for thin-film solar cell fabrication: a case study of kesterite Cu2ZnSnS410.1016/j.isci.2018.02.002 ↗
26. Towards low-cost, environmentally friendly printed chalcopyrite and kesterite solar cells10.1039/C3EE43865A ↗
27. Bandgap-graded Cu2Zn(Sn1– xGex)S4 thin-film solar cells derived from metal chalcogenide complex ligand capped nanocrystals10.1021/cm501568d ↗
28. Preparation of high efficiency Cu2ZnSn(S,Se)4 solar cells from novel non-toxic hybrid ink10.1016/j.jpowsour.2016.10.036 ↗
29. Solution processing of chalcogenide materials using thiol-amine “alkahest” solvent systems10.1039/C7CC02226C ↗
30. Effect of laser incident energy on the structural, morphological and optical properties of Cu2ZnSnS4 (CZTS) thin films10.1016/j.cap.2009.07.023 ↗
31. Synthesis and characterization of Cu2ZnSnS4 thin films grown by PLD: solar cells10.1016/j.jallcom.2011.04.074 ↗
32. Studies of compositional dependent CZTS thin film solar cells by pulsed laser deposition technique: an attempt to improve the efficiency10.1016/j.jallcom.2012.07.108 ↗
33. A review on pulsed laser deposited CZTS thin films for solar cell applications10.1016/j.jallcom.2014.09.018 ↗
34. R. Adhi Wibowo, E. Soo Lee, B. Munir, K. Ho Kim, Pulsed laser deposition of quaternary Cu2ZnSnSe4 thin films, Phys. Status Solidi. 204 (2007) 3373–3379. doi: 10.1002/pssa.200723144.10.1002/pssa.200723144 ↗
35. Epitaxial growth of Cu2ZnSnS4 thin films by pulsed laser deposition
36. Cu2ZnSnS4 thin films annealed in h2s atmosphere for solar cell absorber prepared by pulsed laser deposition10.1143/JJAP.47.602 ↗
37. Fabrication of Cu 2 ZnSnS 4 thin-film solar cell prepared by pulsed laser deposition10.1143/JJAP.46.5780 ↗
38. A.V. Moholkar, S.S. Shinde, A.R. Babar, K.U. Sim, Y. bin Kwon, K.Y. Rajpure, P.S. Patil, C.H. Bhosale, J.H. Kim, Development of CZTS thin films solar cells by pulsed laser deposition: Influence of pulse repetition rate, Sol. Energy. 85 (2011) 1354–1363. doi: 10.1016/j.solener.2011.03.017.10.1016/j.solener.2011.03.017 ↗
39. Single-step preparation and characterization of Cu2ZnSn(SxSe1-x)4 thin films deposited by pulsed laser deposition method10.1016/j.jallcom.2012.03.065 ↗
40. The growth of nanostructured Cu2ZnSnS4 films by pulsed laser deposition10.1016/j.apsusc.2015.02.096 ↗
41. Next generation promising Cu2(ZnxFe1−x)SnS4 photovoltaic absorber material prepared by pulsed laser deposition technique10.1016/j.matlet.2014.08.118 ↗
42. The effects for the deposition temperature onto the structural, compositional and optical properties of pulsed laser ablated Cu2ZnSnS4 thin films grown on soda lime glass substrates10.1016/j.tsf.2013.05.032 ↗
43. Development of pulsed laser deposition for CdS/CdTe thin film solar cells
44. Comparative study on Cu2ZnSnS4 thin films deposited by sputtering and pulsed laser deposition from a single quaternary sulfide target10.1016/j.jcrysgro.2012.09.023 ↗
45. K. Wang, Laser Based Fabrication of Graphene, in: Adv. Graphene Sci., InTech, 2013. doi: 10.5772/55821.10.5772/55821 ↗
46. Thermodynamic aspects of the synthesis of thin-film materials for solar cells10.1002/cphc.201200067 ↗
47. Insights into kesterite’s back contact interface: a status review10.1016/j.solmat.2019.04.033 ↗
48. Flexible Cu2ZnSn(S, Se)4 solar cells with over 10% efficiency and methods of enlarging the cell area10.1038/s41467-019-10890-x ↗
49. A modeling study on utilizing SnS2 as the buffer layer of CZT(S, Se) solar cells10.1016/j.solener.2018.04.010 ↗
50. A review on the numerical modeling of CdS/CZTS-based solar cells
51. Impact of molybdenum out diffusion and interface quality on the performance of sputter grown CZTS based solar cells10.1038/s41598-017-01605-7 ↗
52. Characterization of CZTSSe photovoltaic device with an atomic layer-deposited passivation layer
53. Improving Cu2ZnSnS4 (CZTS) solar cell performance by an ultrathin ZnO intermediate layer between CZTS absorber and Mo back contact10.1002/pssr.201409052 ↗
54. MoSe 2 layer formation at Cu(In, Ga)Se2/Mo Interfaces in High Efficiency Cu(In1- xGax)Se2 Solar Cells10.1143/JJAP.37.L71 ↗
55. Progress in contact, doping and mobility engineering of MoS2: an atomically thin 2D semiconductor10.3390/cryst8080316 ↗
56. Doping against the native propensity of MoS2: degenerate hole doping by cation substitution10.1021/nl503251h ↗
57. Origin of n-type conductivity of monolayer MoS210.1103/PhysRevB.99.121201 ↗
58. Single-layer MoS2 phototransistors10.1021/nn2024557 ↗
59. Monolayer transition metal dichalcogenides as light sources
60. Engineering of effective back-contact barrier of CZTSe: Nanoscale Ge solar cells – MoSe2 defects implication10.1016/j.solener.2019.10.042 ↗
61. Modeling the back contact of Cu2ZnSnSe4 solar cells10.1109/JPHOTOV.2016.2576678 ↗
62. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
63. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
64. Review on Cu2SnS3, Cu3SnS4, and Cu4SnS4 thin films and their photovoltaic performance
65. The materials science of thin films
66. A. Cazzaniga, A. Crovetto, R.B. Ettlinger, S. Canulescu, O. Hansen, N. Pryds, J. Schou, ZnS top layer for enhancement of the crystallinity of CZTS absorber during the annealing, 2015 IEEE 42nd Photovolt. Spec. Conf. PVSC 2015. (2015) 6–9. doi: 10.1109/PVSC.2015.7355905.10.1109/PVSC.2015.7355905 ↗
67. Gallium doping in transparent conductive ZnO thin films prepared by chemical spray pyrolysis10.1088/0022-3727/41/13/135404 ↗
68. How small amounts of Ge modify the formation pathways and crystallization of kesterites
69. Kesterite successes, ongoing work, and challenges: a perspective from vacuum deposition10.1109/JPHOTOV.2012.2215842 ↗
70. Effect of sulfurization time on the properties of copper zinc tin sulfide thin films grown by electrochemical deposition10.1038/srep32431 ↗
71. Cu2ZnSnSe4 thin film solar cells produced via co-evaporation and annealing including a SnSe2 capping layer
72. Particulates generation and solutions for their elimination in pulsed laser deposition
73. Q. Zhang, H. Deng, J. Yu, J. Tao, L. Sun, P. Yang, J. Chu, Grain growth enhancing through preheating treatment of a sputtered stacked metallic precursor for Cu(In,Al)Se2 thin film solar cells application, Mater. Sci. Eng. B Solid-State Mater. Adv. Technol. 242 (2019) 31–36. doi: 10.1016/j.mseb.2019.03.008.10.1016/j.mseb.2019.03.008 ↗
74. Understanding the synthetic pathway of a single-phase quarternary semiconductor using surface-enhanced Raman scattering: a case of wurtzite Cu2ZnSnS4 nanoparticles10.1021/ja501786s ↗
75. Sol-gel synthesis assisted by supercritical CO2 – a flexible process for ceramic powder and membrane preparation10.4028/www.scientific.net/AST.62.113 ↗
76. M.J. Keshvani, S. Katba, S. Jethva, M. Udeshi, B. Kataria, A. Ravalia, D.G. Kuberkar, Studies on structural, morphological and electroresistance properties of sol–gel grown nanostructured PrMnO3, Mater. Sci. Eng. B Solid-State Mater. Adv. Technol. 218 (2017) 40–50. doi: 10.1016/j.mseb.2017.02.006.10.1016/j.mseb.2017.02.006 ↗
77. A fine route to tune the photocatalytic activity of TiO210.1016/j.apcatb.2005.08.011 ↗
78. Controlling the band gap of ZnO by programmable annealing10.1021/jp207237d ↗
79. Analysis of Cu2ZnSnS4/CdS based photovoltaic cell: a numerical simulation approach10.1016/j.spmi.2016.10.028 ↗
80. Compositional dependence of charge carrier transport in kesterite Cu2ZnSnS4 solar cells10.1063/1.4971179 ↗
81. Effects of Na and MoS2 on Cu 2 ZnSnS 4 thin-film solar cell10.1002/pip.2500 ↗
82. S. Gao, Z. Jiang, L. Wu, J. Ao, Interfaces of high-efficiency kesterite Cu 2 ZnSnS (e) 4 thin film solar cells ∗, (2018). doi: 10.1088/1674-1056/27/1/018803.10.1088/1674-1056/27/1/018803 ↗
83. A temporary barrier effect of the alloy layer during selenization: tailoring the thickness of MoSe2 for efficient Cu2ZnSnSe4 solar cells10.1002/aenm.201402178 ↗
84. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
85. Quantifying losses in open-circuit voltage in solution-processable solar cells10.1103/PhysRevApplied.4.014020 ↗
86. Elucidating the role of interfacial MoS2 layer in Cu2ZnSnS4 thin film solar cells by numerical analysis10.1016/j.solener.2018.11.055 ↗
87. Band alignment at the Cu2ZnSn(SxSe1-x)4 /CdS interface10.1063/1.3600776 ↗
88. Microscopic study of semiconductor heterojunctions: Photoemission measurement of the valance-band discontinuity and of the potential barriers10.1103/PhysRevB.28.1944 ↗