journal article·2006-07

Polymer concrete composites for enhancement of mobility of troops in desert operations

Ram Gopal

Materials Science and Engineering: B· Volume 132· Issue 1-2
Publisher page

Abstract

Abstract Polymer concrete composites (PCC) known for their rapid strength gain have been developed using locally available sand and natural and synthetic resins for different military applications in sandy and coastal areas. Employing natural resins (guar gum, tannins and rosin), soluble silicates, modified phenol formaldehyde and urea formaldehyde resins, furan resins and orthophthalate type unsaturated polyester resin systems, chemical stabilization of sand has been achieved recording unconfined compression strength (UCS) of standard laboratory specimens up to 442 kg/cm 2 after curing at 50 °C for 24 h. The fast setting and high strength PCC with 2 h curing at 50 °C, 10–15% resin-catalyst system and high exothermic cure have been found to record maximum strength more than 275 kg/cm 2 . Vehicle mounted and air-borne mechanical spraying systems and grouting techniques have been developed for construction of chemically stabilized temporary (50 m × 30 m) and semi-permanent helipads (50 m× 50m), experimental road (50 m × 4 m) and other civil structures. These experimental structures have been tested in field. The spraying systems, introduced into services and soil stabilization methods have been found to be effective and safe for construction and repair of roads, helipads, runways, joint fillings of airfield pavements, missile launching pads, test beds of army tanks and other military structures to enhance mobility of troops in desert, coastal and high altitude areas during exigencies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Gopal · Indian Highways · 1981 · 9 · 23
2. Gopal · Def. Sci. J. · 1981 · 31 · 32310.14429/dsj.31.6380 ↗
3. Gopal · Indian Highways · 1982 · 10 · 28
4. Gopal · 1983 · vol. 8
5. Gopal · 1984 · vol. 9
6. Gopal · 1986 · 93
7. Gopal · Def. Sci. J. · 1988 · 38 · 16910.14429/dsj.38.4834 ↗
8. Gopal · Def. Sci. J. · 1990 · 40 · 19110.14429/dsj.40.4460 ↗
9. Gupta · Def. Sci. J. · 1994 · 44 · 3310.14429/dsj.44.4149 ↗
10. A. Prakash, S.P. Garg, R.C. Kapoor, Transactions of Indian Society of Desert Technology and University Centre of Desert Studies (Trans. Isdt & Ucds), vol. 1, Faculty of Engineering, University of Jodhpur, Jodhpur, India, 1976, pp. 42–44 & 131–133.
11. Prakash · 1981 · vol. 6
12. Chanda · Die Angewandte Makromolekulare Chemic · 1978 · 69 · 8510.1002/apmc.1978.050690107 ↗
13. Singh · Roads & Road Constructions · 1963 · 41 · 106
14. Associated Instrument Manufacturers (India) Load Frame Motorized 200kN for Compression Strength, SLF-9B (1980) Asaf Ali Road, New Delhi, India.
15. Gopal · 1981
16. Bhargava · Bull. Radiological Prot. · 1984 · 7 · 29
17. Gopal · Bull. Radiological Prot. · 1985 · 8 · 75
18. Gopal · Bull. Radiological Prot. · 1986 · 9 · 131
19. Ohama · 1987 · 71
20. Sandstill, a registered trademark of Energy Systems Associates, Inc., McLean, Virginia, USA.