journal article·2022-07

Effect of ark clam shell on crystal growth and mechanical evaluation of foam glass-ceramic derived from cullet glass waste

N.A.N. Hisham, M.H.M. Zaid, K.A. Matori, M.K. Shabdin

Publisher page

Abstract

The solid-state sintering technique was used to successfully manufacture low-cost foam glass-ceramic utilising ark clamshell and cullet glass waste. The foam glass-ceramic has a composition of xACS-(100-x)SLS, where x = 1, 3, 6, and 9 wt%, and is classified as FGC1, FGC2, FGC3, and FGC4 as the ark clamshell content increases. The X-ray diffraction (XRD) and Fourier transform infrared (FTIR) findings reveal that when the ark clamshell composition increases, two main crystals with the appearance of Csingle bondO and Casingle bondOsingle bondSi bands grow as wollastonite (CaSiO3) and cristobalite (SiO2) phases. Field emission scanning electron microscope (FESEM) micrograph was used to confirm the porosity microstructure of the foam glass-ceramic aggregates. The sample with the greatest expansion (83.98%) yielded the lowest apparent density (0.699 g/cm3). The compressive strength measurement of the foam glass-ceramic aggregates was measured using GCF2 with 3 wt% of ACS. For a sample containing 3 wt% ACS, the maximum compressive strength value was 1.14 MPa, with an average total porosity of about 58.34%, and it has the potential to be employed in the construction sector.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Bone Tissue Engineering Materials · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents10.1016/j.ceramint.2007.10.019 ↗
2. Elaboration and characterization of porous granules based on waste glass10.1016/j.powtec.2010.08.038 ↗
3. Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent10.1016/j.ceramint.2012.08.042 ↗
4. Macroporous Bioglass®-derived scaffolds for bone tissue regeneration10.1016/j.ceramint.2011.01.023 ↗
5. 45S5 Bioglass®-derived glass–ceramic scaffolds for bone tissue engineering10.1016/j.biomaterials.2005.11.025 ↗
6. 2006
7. Reutilization and stabilization of wastes by the production of glass foams10.1016/j.ceramint.2006.02.010 ↗
8. Vitrocrystalline foams produced with EPS as pore former: Processing and characterization10.1016/j.psep.2018.10.007 ↗
9. The role of glass waste in the production of ceramic-based products and other applications: A review10.1016/j.jclepro.2017.08.185 ↗
10. Experimental survey of the chemical durability of commercial soda-lime-silicate glasses10.1016/S0025-5408(01)00724-3 ↗
11. Effect of sintering temperature on physical, structural and optical properties of wollastonite based glass-ceramic derived from waste soda lime silica glasses10.1016/j.rinp.2017.04.022 ↗
12. Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass10.1016/j.jnoncrysol.2013.02.004 ↗
13. Investigation on structural and optical properties of SLS–ZnO glasses prepared using a conventional melt quenching technique
14. Elastic moduli prediction and correlation in soda lime silicate glasses containing ZnO
15. Fabrication of highly insulating foam glass made from CRT panel glass10.1016/j.ceramint.2015.04.051 ↗
16. Design of glass foams with low environmental impact10.1016/j.ceramint.2014.10.127 ↗
17. Preparation and characterization of glass–ceramic foams from blast furnace slag and waste glass10.1016/j.matlet.2014.11.122 ↗
18. Effect of Na2CO3 as foaming agent on dynamics and structure of foam glass melts10.1016/j.jnoncrysol.2014.04.029 ↗
19. Processing, structures and compressive properties of porous glass-ceramic composites prepared from secondary by-product materials10.1016/j.ceramint.2013.02.048 ↗
20. Characterization of mussel shells as a bio-based building insulation material
21. Glass Foam
22. Integrated utilization of high alumina fly ash for synthesis of foam glass ceramic10.1016/j.ceramint.2018.04.207 ↗
23. Effect of sintering temperature on the crystal growth, microstructure and mechanical strength of foam glass-ceramic from waste materials10.1016/j.jmrt.2020.03.089 ↗
24. Effect of frit size on sintering, crystallization and electrical properties of wollastonite glass-ceramics10.1016/j.jnoncrysol.2010.09.062 ↗
25. Preparation and characterization of novel foamed porous glass-ceramics10.1016/j.matchar.2015.03.007 ↗
26. Foam glass processing using a polishing glass powder residue10.1016/j.ceramint.2012.12.104 ↗
27. Glass foams produced from soda-lime glass waste and rice husk ash applied as partial substitutes for concrete aggregates10.1016/j.psep.2019.05.044 ↗
28. Preparation of high strength glass ceramic foams from waste cathode ray tube and germanium tailings10.1016/j.conbuildmat.2016.01.036 ↗
29. Glass foams produced from glass bottles and eggshell wastes10.1016/j.psep.2017.06.011 ↗
30. Fabrication of porous apatite-wollastonite glass ceramics using a two steps sintering process10.1016/j.mtcomm.2022.103216 ↗
31. Effect of Al2O3 and CaO/SiO2 on the viscosity of calcium-silicate–based slags containing 10 mass Pct MgO10.1007/s11663-012-9759-7 ↗