Impact of vacuum on the resistive switching in HfO2-based conductive-bridge RAM with highly-doped silicon bottom electrode
Source abstract
Abstract
Abstract Moisture can modulate the resistive switching dynamics in oxide-based electrochemical metallization devices. Unconventional testing environments such as vacuum, could possibly shift the device characteristics, requiring therefore a careful investigation. This work investigates the write/erase behavior of Cu/HfO2(~80-nm-thick)/p+-Si devices in ambient atmosphere and vacuum, under similar electrical bias applied to the top Cu electrode. In vacuum (~5.3 × 10−3 Pa), a parasitic negative SET (N-SET) readily arises during the “erase” operation, unlike in ambient air. The electrical studies and physicochemical analyses of electrically-biased and pristine devices reveal that the “erase” process is sensitive to the environment. Vacuum facilitates the electric-field-controlled generation of an oxygen-vacancy-based path that likely induces a parasitic N-SET at the negative voltage. This path is aided by the presence of partially-ruptured copper filaments at the HfO2/p+-Si interface. The vacuum effects leading to the N-SET are eliminated by introducing a passivating gas environment (zero-air or nitrogen), or device encapsulation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Memory and Neural Computing · Ferroelectric and Negative Capacitance Devices · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (91)
Show source-provided references
1. A 2M1M crossbar architecture
2. An efficient heterogeneous memristive xnor for in-memory computing
3. Towards oxide electronics: A roadmap10.1016/j.apsusc.2019.03.312 ↗
4. T. Li X. Bi N. Jing X. Liang L. Sneak-path based test and diagnosis for 1R RRAM crossbar using voltage bias technique, 2017 54th ACM/EDAC/IEEE Design Automation Conference (DAC). https://doi.org/10.1145/3061639.3062318.10.1145/3061639.3062318 ↗
5. Stateful memristor-based search architecture10.1109/TVLSI.2018.2812800 ↗
6. Bio-functionalization study of memristive-biosensors for early detection of prostate cancer
7. Effect of Pt/TiO2 interface on room temperature hydrogen sensing performance of memristor type Pt/TiO2/Pt structure10.1016/j.snb.2017.06.159 ↗
8. When memristance crosses the path with humidity sensing—about the importance of protons and its opportunities in valence change memristors10.1002/aelm.201800282 ↗
9. MemSens: memristor-based radiation sensor10.1109/JSEN.2018.2808285 ↗
10. An artificial flexible visual memory system based on an UV-motivated memristor10.1002/adma.201705400 ↗
11. Sol-gel/drop-coated micro-thick TiO2 memristors for γ-ray sensing10.1016/j.matchemphys.2016.09.027 ↗
12. V2O5 nanosheets for flexible memristors and broadband photodetectors10.1021/acsanm.8b02233 ↗
13. The missing memristor found10.1038/nature06932 ↗
14. Memristors: properties, models, materials
15. Redox-based resistive switching memories – nanoionic mechanisms, prospects, and challenges10.1002/adma.200900375 ↗
16. Electrochemical metallization memories—fundamentals, applications, prospects10.1088/0957-4484/22/28/289502 ↗
17. Ultrafast synaptic events in a chalcogenide memristor
18. State of the art of metal oxide memristor devices10.1515/ntrev-2015-0029 ↗
19. Memristors with organic-inorganic halide perovskites10.1002/inf2.12012 ↗
20. Silver/(sub-10 nm)hafnium-oxide-based resistive switching devices on silicon: characteristics and switching mechanism10.1088/1361-6528/ab68fb ↗
21. Improved resistive switching characteristics of a Pt/HfO2/Pt resistor by controlling anode interface with forming and switching polarity10.1016/j.apsusc.2017.11.073 ↗
22. Resistive switching behavior in memristors with TiO2 nanorod arrays of different dimensions10.1016/j.apsusc.2019.04.119 ↗
23. An electrical characterisation methodology for benchmarking memristive device technologies10.1038/s41598-019-55322-4 ↗
24. Transmission electron microscopy on memristive devices: An overview10.9729/AM.2016.46.4.206 ↗
25. Observation of the creation and annihilation of local current paths in HfO2 thin films on Pt by ultrahigh-vacuum conductive atomic force microscopy: Evidence of oxygen spill over during the forming process10.1143/JJAP.48.060202 ↗
26. Resistive switching study in HfO2 based resistive memories by conductive atomic force microscopy in vacuum10.1063/1.5025143 ↗
27. Stateful characterization of resistive switching TiO2 with electron beam induced currents10.1038/s41467-017-02116-9 ↗
28. Understanding memristive switching via in situ characterization and device modeling10.1038/s41467-019-11411-6 ↗
29. Effects of moisture on the switching characteristics of oxide-based, gapless-type atomic switches10.1002/adfm.201101846 ↗
30. Processes and effects of oxygen and moisture in resistively switching TaOx and HfOx10.1002/aelm.201700458 ↗
31. Effects of oxygen and moisture on the IV characteristics of TiO2 thin films10.1016/j.jmat.2018.01.005 ↗
32. Humidity effects on the redox reactions and ionic transport in a Cu/Ta2O5/Pt atomic switch structure10.7567/JJAP.55.06GJ09 ↗
33. Bipolar Cu/HfO2/p++Si memristors by sol-gel spin coating method and their application to environmental sensing10.1038/s41598-019-46443-x ↗
34. Recent progress in resistive random access memories: Materials, switching mechanisms, and performance10.1016/j.mser.2014.06.002 ↗
35. Study of the L23 edges in the 3d transition metals and their oxides by electron-energy-loss spectroscopy with comparisons to theory10.1103/PhysRevB.26.614 ↗
36. Advances in resistive switching based memory devices10.1088/1361-6463/ab2e9e ↗
37. Dual resistive switching characteristics in CuxSiyO resistive memory10.1143/APEX.5.111102 ↗
38. Coexistence of bipolar and unipolar switching of Cu and oxygen vacancy nanofilaments in Cu/TaOx/Pt resistive devices10.1149/2.012201ssl ↗
39. Joint contributions of Ag ions and oxygen vacancies to conducting filament evolution of Ag/TaOx/Pt memory device10.1063/1.4899319 ↗
40. Physical model of dynamic joule heating effect for reset process in conductive-bridge random access memory10.1007/s10825-013-0552-x ↗
41. Resistance random access memory10.1016/j.mattod.2015.11.009 ↗
42. Forming and switching mechanisms of a cation-migration-based oxide resistive memory10.1088/0957-4484/21/42/425205 ↗
43. Distinguishing oxygen vacancy electromigration and conductive filament formation in TiO2 resistance switching using liquid electrolyte contacts10.1021/acs.nanolett.7b01460 ↗
44. Thermophoresis/diffusion as a plausible mechanism for unipolar resistive switching in metal–oxide–metal memristors10.1007/s00339-012-6902-x ↗
45. Conduction channel formation and dissolution due to oxygen thermophoresis/diffusion in hafnium oxide memristors10.1021/acsnano.6b06275 ↗
46. The interaction of oxygen vacancies with grain boundaries in monoclinic HfO210.1063/1.3271184 ↗
47. Grain boundary-driven leakage path formation in HfO2 dielectrics10.1016/j.sse.2011.06.031 ↗
48. Grain boundary mediated leakage current in polycrystalline HfO2 films10.1016/j.mee.2011.03.024 ↗
49. Effects of moisture and redox reactions in VCM and ECM resistive switching memories10.1088/1361-6463/aad581 ↗
50. Redox reactions at Cu, Ag/Ta2O5 interfaces and the effects of Ta2O5 film density on the forming process in atomic switch structures10.1002/adfm.201500853 ↗
51. Dielectric properties of TiO2 thin films deposited by a DC magnetron sputtering system10.1016/S0040-6090(00)01027-0 ↗
52. Highly sensitive humidity sensor based on amorphous Al2O3 nanotubes10.1039/C0JM02753G ↗
53. States of H2O adsorbed on oxides: an investigation by near and mid infrared spectroscopy10.1016/j.apcata.2006.03.002 ↗
54. Adsorption of water on copper, nickel, and iron10.5006/1.3280431 ↗
55. Adsorption of moisture and organic contaminants on hafnium oxide, zirconium oxide, and silicon oxide gate dielectrics10.1149/1.1605747 ↗
56. Adsorption and dissociation of water on HfO2 (111) and (110) surfaces10.3866/PKU.WHXB201303081 ↗
57. Susceptibility of SiO2, ZrO2, and HfO2 dielectrics to moisture contamination10.1002/aic.10148 ↗
58. Activation of CO2 on copper surfaces: the synergy between electric field, surface morphology, and excess electrons10.1021/acs.jpcc.0c00778 ↗
59. Properties of atomic layer deposited HfO2 thin films10.1016/j.tsf.2009.04.033 ↗
60. Hafnium oxide gate dielectrics grown from an alkoxide precursor: structure and defects10.1016/j.mseb.2003.10.020 ↗
61. Surface chemistry of Cu in the presence of CO2 and H2O10.1021/la8011052 ↗
62. Thermodynamic analysis of moisture absorption phenomena in high-permittivity oxides as gate dielectrics of advanced complementary-metal-oxide-semiconductor devices10.1063/1.3455110 ↗
63. Improved soil carbonate determination by FT-IR and X-ray analysis10.1007/s10311-012-0380-4 ↗
64. First-principles calculation of oxygen K-electron energy loss near edge structure of HfO2
65. Probing the electronic structure of HfO2 polymorphs via electron energy loss spectroscopy
66. Fultz · 2012
67. Semiconducting-like filament formation in TiN/HfO2/TiN resistive switching random access memories10.1063/1.3696672 ↗
68. Nature of the filament formed in HfO2-based resistive random access memory10.1016/j.tsf.2012.12.097 ↗
69. O K-energy loss near-edge structure change induced by tantalum impurity in monoclinic hafnium oxide
70. Engineering incremental resistive switching in TaOx based memristors for brain-inspired computing10.1039/C6NR00476H ↗
71. High dielectric constant oxides10.1051/epjap:2004206 ↗
72. Diffusion, solubility and gettering of copper in silicon10.1016/S0921-5107(99)00514-0 ↗
73. Diffusion of metals in silicon dioxide10.1149/1.2108827 ↗
74. Eliminating negative-SET behavior by suppressing nanofilament overgrowth in cation-based memory10.1002/adma.201603293 ↗
75. Analysis of the negative-SET behaviors in Cu/ZrO2/Pt devices10.1186/s11671-016-1762-5 ↗
76. Nonpolar nonvolatile resistive switching in Cu doped ZrO210.1109/LED.2008.919602 ↗
77. Temperature-programmed desorption analyses of sol–gel deposited and crystallized HfO2 films10.1143/JJAP.46.4209 ↗
78. Molas · 2014 · 6.1.1
79. Impact of post-oxide deposition annealing on resistive switching in HfO2-based oxide RRAM and conductive-bridge RAM devices10.1109/LED.2015.2477491 ↗
80. Hafnium-oxide 3-D nanofilms via the anodizing of Al/Hf metal layers10.1021/acs.chemmater.8b00188 ↗
81. Investigation of thermal stability and reliability of HfO2 based resistive random access memory devices with cross-bar structure10.1063/1.4921182 ↗
82. Copper oxide reduction through vacuum annealing10.1016/S0169-4332(02)01239-4 ↗
83. Observation of conducting filament growth in nanoscale resistive memories10.1038/ncomms1737 ↗
84. Direct observation of dual-filament switching behaviors in Ta2O5-based memristors10.1002/smll.201603116 ↗
85. Formation of an oxygen vacancy-dinitrogen complex in nitrogen-doped hafnium oxide10.1039/c3ja50034a ↗
86. Passivation of oxygen vacancy sates in HfO2 by nitrogen10.1063/1.2173688 ↗
87. Resistive switching behaviors of Cu/TaOx/TiN device with combined oxygen vacancy/copper conductive filaments10.1016/j.cap.2015.06.002 ↗
88. Reinforcement of polydimethylsiloxane networks by in-situ precipitation of silica: a new method for preparation of filled elastomers10.1002/marc.1982.030031006 ↗
89. Modified PDMS packaging of sensory e-textile circuit microsystems for improved robustness with washing
90. Novel PDMS(silicone)-in-PDMS(silicone): low cost flexible electronics without metallization10.1109/ECTC.2010.5490654 ↗
91. Wang · 2006 · 47