journal article·2021-12

Synthesis of nickel nanoparticles-deposited strontium titanate nanocubes (Ni-STO) and heterojunction electrical applications over a wide temperature range

Lütfi Bilal Taşyürek, Şakir Aydoğan, Melike Sevim, Zakir Çaldıran

Publisher page

Abstract

Abstract In the present study, the structural properties of nickel nanoparticles-deposited strontium titanate nanocubes (Ni-STO) were examined by taking XRD, ICP-MS, TEM and SEM images. Temperature-dependent capacitance–voltage (C-V) and current–voltage (I-V) measurements were made for the electrical characterization of the Ni/Ni-STO/n-Si heterojunction devices produced. As the temperature increases from 80 K to 400 K, the ideality factor (n) decreases from 2.30 to 1.02 while barrier height (BH) increases from 0.27 eV to 0.80 eV. In the heterojunction device between Ni-STO and n-type Si, electrons can be captured at the Schottky barrier interface and recombinations can be reduced. Devices produced with Ni-STO material had a positive effect on performance compared to the devices produced with STO in previous studies. The electrical parameters obtained give compatible results as a function of temperature. Metal deposited STOs are potential candidates for temperature-dependent sensors and electrical devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Enhancing the charge extraction and stability of perovskite solar cells using strontium titanate (SrTiO3) electron transport layer10.1021/acsaem.9b01567 ↗
2. Defects and threshold displacement energies in SrTiO3 perovskite using atomistic computer simulations10.1016/j.nimb.2006.11.069 ↗
3. Oxygen diffusion in SrTiO3 and related perovskite oxides10.1002/adfm.201500827 ↗
4. The synthesis of SrTiO3 nanocubes and the analysis of nearly ideal diode application of Ni/SrTiO3 nanocubes/n-Si heterojunctions10.1088/2053-1591/aaa745 ↗
5. Strontium titanate nanocubes assembled on mesoporous graphitic carbon nitride (SrTiO3/mpg-C3N4): Preparation, characterization and catalytic performance10.1016/j.molliq.2019.111208 ↗
6. A.D. Bruce, R.A. Cowley, B. Dorner, A. Muller, H. Thomas, T. in C. P. 23, Structural phase transitions, vol. 29. Taylor & Francis London, 1981.
7. Lines · 2001
8. The phase transition of strontium titanate10.1098/rsta.1996.0130 ↗
9. Lattice-dynamical study of the 110° K phase transition in SrTiO310.1103/PhysRev.177.858 ↗
10. Calculations for antiferrodistortive phase of SrTiO3 perovskite: hybrid density functional study
11. First-principles study of structural, elastic, electronic, and thermal properties of SrTiO3 perovskite cubic10.1016/j.physleta.2008.12.017 ↗
12. Oxygen-vacancy-related giant permittivity and ethanol sensing response in SrTiO3-δ ceramics10.1016/j.physe.2018.12.025 ↗
13. SrTiO3 / BiOI heterostructure: interfacial charge separation, enhanced photocatalytic activity, and reaction mechanism10.1016/S1872-2067(19)63472-8 ↗
14. Highly improved thermoelectric performance of Nb-doped SrTiO3 due to significant suppression of phonon thermal conduction by synergetic effects of pores and metallic nanoparticles10.1016/j.ceramint.2020.07.085 ↗
15. Simultaneously achieved high energy storage density and efficiency in sol-gel-derived amorphous Mn-doped SrTiO3 thin films10.1016/j.jallcom.2020.155636 ↗
16. Fabrication and electrical characterization of Au/p-Si/STO/Au contact10.1016/j.cap.2008.09.007 ↗
17. Temperature dependence of current–voltage characteristics of gold–strontium titanate thin film Schottky diode10.1016/j.physe.2009.12.007 ↗
18. The study on characterizations of SrTiO3 thin films with different growth temperatures10.1016/j.spmi.2014.10.018 ↗
19. N.R. Varra, D. V Vivekananda, G. Sai Krishna, B. Sri Vivek, P. Vimala, “Electrical Characteristics of Au/n-GaN Schottky Junction with a High-k SrTiO3 Insulating Layer,” 2019.
20. Microstructural and interface properties of Au/SrTiO3 (STO)/n-GaN heterojunction with an e-beam evaporated high-k STO interlayer10.1016/j.jallcom.2020.153775 ↗
21. Temperature dependent electronic transport properties of heterojunctions formed between perovskite SrTiO3 nanocubes and silicon
22. Preparation of Cu-loaded SrTiO3 nanoparticles and their photocatalytic activity for hydrogen evolution from methanol aqueous solution10.1016/j.apsusc.2013.03.054 ↗
23. Photocatalytic degradation of dyes over Au decorated SrTiO3 nanoparticles under simulated sunlight and visible light irradiation10.2109/jcersj2.17244 ↗
24. Scanning different Ni-noble metal (Pt, Pd, Ru) bimetallic nanoparticles supported on carbon nanofibers for one-pot cellobiose conversion10.1016/j.apcata.2019.117182 ↗
25. Tuning the acid/metal balance of carbon nanofiber-supported nickel catalysts for hydrolytic hydrogenation of cellulose10.1002/cssc.201100782 ↗
26. Hydrogen production over metal-loaded mesoporous-assembled SrTiO3 nanocrystal photocatalysts: effects of metal type and loading10.1016/j.ijhydene.2010.04.015 ↗
27. The effect of imidazolium ionic liquid on the morphology of Pt nanoparticles deposited on the surface of SrTiO3 and photoactivity of Pt–SrTiO3 composite in the H2 generation reaction10.1016/j.ijhydene.2019.08.094 ↗
28. J. Liu, Y. Sun, Z. Li, S. Li, and J. Zhao, Photocatalytic hydrogen production from water/methanol solutions over highly ordered Ag–SrTiO3 nanotube arrays, Int. J. Hydrogen Energy, vol. 36, no. 10, pp. 5811–5816, 2011.10.1016/j.ijhydene.2011.01.117 ↗
29. Partial oxidation of CH4 over Ni/SrTiO3 catalysts prepared by a solid-phase crystallization method10.1006/jcat.2002.3537 ↗
30. Study on the anti-coking nature of Ni/SrTiO3 catalysts by the CH4 pyrolysis10.1023/A:1012245412882 ↗
31. Multifunctional photocatalysts of Pt-decorated 3DOM perovskite-type SrTiO3 with enhanced CO2 adsorption and photoelectron enrichment for selective CO2 reduction with H2O to CH410.1016/j.jcat.2019.07.037 ↗
32. Modification of Ag nanoparticles on the surface of SrTiO3 particles and resultant influence on photoreduction of CO210.1016/j.apsusc.2017.11.004 ↗
33. Perovskite oxides for semiconductor-based gas sensors10.1016/j.snb.2006.10.051 ↗
34. Comparison of the sensitivity as optical temperature sensor of nano-perovskite doped with Nd3+ ions in the first and second biological windows10.1016/j.snb.2017.08.140 ↗
35. Monodisperse nickel nanoparticles and their catalysis in hydrolytic dehydrogenation of ammonia borane10.1021/ja909243z ↗
36. Ketjen Black supported monodisperse nickel–platinum alloy nanoparticles for the efficient catalyst in the hydrolytic dehydrogenation of ammonia borane
37. Preparation and characterization of sol–gel-derived n-ZnO thin film for Schottky diode application10.1007/s00339-015-8987-5 ↗
38. Temperature dependent electrical and dielectric properties of Au/polyvinyl alcohol (Ni, Zn-doped)/n-Si Schottky diodes10.1016/j.microrel.2009.09.005 ↗
39. The investigation of the electrical properties of Fe3O4/n-Si heterojunctions in a wide temperature range10.1016/j.jcis.2016.04.006 ↗
40. Metal-semiconductor contacts
41. Electronic parameters of high barrier Au/Rhodamine-101/n-Inp Schottky diode with organic ınterlayer10.1016/j.tsf.2011.09.043 ↗
42. On temperature-dependent experimental I-V and C-V data of Ni/n-GaN Schottky contacts10.1063/1.3517810 ↗
43. Effect of temperature on the capacitance–frequency and conductance–voltage characteristics of polyaniline/p-Si/Al MIS device at high frequencies10.1016/j.microrel.2012.02.016 ↗
44. Room temperature deposition of XRD-amorphous TiO2 thin films: investigation of device performance as a function of temperature10.1016/j.ceramint.2018.03.222 ↗
45. Parameter extraction from non-ideal C− V characteristics of a Schottky diode with and without interfacial layer10.1016/0038-1101(92)90286-L ↗
46. Analysis of temperature dependent current-voltage and capacitance-voltage characteristics of an Au/V2O5/n-Si Schottky diode10.1063/1.4993553 ↗
47. Current–voltage and capacitance–voltage characteristics of polypyrrole/p-InP structure10.1016/j.vacuum.2004.10.003 ↗
48. Analysis of current-voltage-temperature (I-V-T) and capacitance-voltage-temperature (C-V-T) characteristics of Ni/Au Schottky contacts on n-type InP
49. Temperature dependency and carrier transport mechanisms of Ti/p-type InP Schottky rectifiers10.1016/j.jallcom.2010.05.074 ↗
50. Functionalized boron-dipyrromethenes and their applications
51. Temperature-dependent CV characteristics of Au/ZnO/n-Si device obtained by atomic layer deposition technique
52. Temperature dependent current transport mechanism in osmium-doped perovskite yttrium manganite-based heterojunctions10.1063/1.5094129 ↗
53. Barrier heights of real Schottky contacts explained by metal-induced gap states and lateral inhomogeneities10.1116/1.590839 ↗
54. Dependence of characteristic diode parameters on sample temperature in Ni/epitaxy n-Si contacts10.1016/j.mssp.2010.12.010 ↗
55. Effect of indium doping on the electrical and structural properties of TiO2 thin films used in MOS devices10.1016/j.jallcom.2018.10.048 ↗
56. Electronic parameters of MIS Schottky diodes with DNA biopolymer interlayer10.1515/msp-2015-0089 ↗
57. Three-dimensional polarization imaging of (Ba, Sr)TiO3: Mg O composites10.1063/1.1854722 ↗
58. Space charge limited current mechanism (SCLC) in the graphene oxide–Fe3O4 nanocomposites/n-Si heterojunctions10.1016/j.jallcom.2015.01.117 ↗
59. Extraction of Schottky diode parameters from forward current-voltage characteristics10.1063/1.97359 ↗
60. Electrical properties and interface state energy distributions of Cr/n-Si Schottky barrier diode10.1016/j.spmi.2013.10.015 ↗
61. Investigation of electrical properties of Ni/Crystal Violet (C25H30CIN3)/n-Si/Al diode as a function of temperature10.1016/j.jallcom.2018.05.295 ↗
62. The analysis of the series resistance and interface states of MIS Schottky diodes at high temperatures using I-V characteristics10.1016/j.jallcom.2009.04.119 ↗
63. Electrical transport characteristics of Sn/p-Si schottky contacts revealed from I-V–T and C–V–T measurements10.1016/j.physb.2006.10.039 ↗
64. Properties of Pt/4H-SiC Schottky diodes with interfacial layer at elevated temperatures10.1016/j.sse.2005.01.015 ↗
65. The current transformer mechanism and structural properties of novel Al/BODIPY/pSi and Au/BODIPY/pSi heterojunctions10.1016/j.mssp.2021.105805 ↗
66. The role of molybdenum trioxide in the change of electrical properties of Cr/MoO3/n-Si heterojunction and electrical characterization of this device depending on temperature10.1016/j.sna.2021.112765 ↗
67. Sze · 2008
68. Characterization of non-uniform Ni/4H-SiC Schottky diodes for improved responsivity in high-temperature sensing10.1016/j.mssp.2019.01.018 ↗
69. Fabrication of Schottky barrier diodes with the lithium fluoride interface layer and electrical characterization in a wide temperature range10.1016/j.jallcom.2019.152601 ↗
70. A modified forward I-V plot for Schottky diodes with high series resistance10.1063/1.325607 ↗
71. Temperature dependent electrical characterization of RF sputtered MoS2/n-Si heterojunction10.1016/j.ijleo.2017.06.037 ↗
72. Temperature-dependent electrical properties of (Pt/Au)/Ga-polarity GaN/Si (1 1 1) Schottky diode10.1016/j.mee.2011.11.019 ↗
73. On current-voltage and capacitance-voltage characteristics of metal-semiconductor contacts10.3906/fiz-2007-11 ↗
74. Studies of tunnel MOS diodes I. Interface effects in silicon Schottky diodes10.1088/0022-3727/4/10/319 ↗