journal article·2021-05

Poly(o-Anisidine)/carbon nanotubes/graphene nanocomposite as a novel and cost-effective supercapacitor material

Milad Bonakdar, Sayed Reza Hosseini, Shahram Ghasemi

Publisher page

Abstract

Abstract In the present work, poly(o-anisidine)/carbon nanotube/reduced graphene oxide (POA/CNT/rGO) nanocomposite is synthesized by in-situ polymerization method. Surface morphology of the prepared nanocomposite is investigated by field emission-SEM. The FE-SEM results show that POA is grew onto the surface of rGO. The POA/CNT/rGO composite exhibits a specific capacitance (Cs) of 142F g−1 by galvanostatic charge/discharge, which is lower than Cs of the POA/rGO, but much higher than pure POA and POA/CNT. These values for POA/CNT/rGO, POA/rGO and POA/CNT are obtained to be 274.9, 300.2 and 226.3F g−1, respectively. The results show that by addition of 1.0 wt% CNTs into rGO, cycle life of the POA/CNT/rGO composite is greatly improved due to the maintenance of highly conductive paths as well as mechanical strength during charge/discharge process. After 500 cycles, Cs the POA/CNT/rGO decreases only 7% of the initial capacitance compared to 50% and 60% for POA/rGO and POA/CNT composites, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. One-step green route synthesis of spinel ZnMn2O4 nanoparticles decorated on MWCNTs as a novel electrode material for supercapacitor10.1016/j.mseb.2019.114481 ↗
2. MnO2 nanospheres electrode composed of low crystalline ultra-thin nanosheets for high performance and high rate supercapacitors10.1016/j.mseb.2020.114610 ↗
3. Preparation of ZnMn2O4 and ZnMn2O4/graphene nanocomposites by combustion synthesis for their electrochemical properties10.1016/j.mseb.2020.114647 ↗
4. Effect of annealing temperature and Ag contents on the catalytic activity and supercapacitor performances of Ag@Ag2O/RGO nanocomposites10.1016/j.mseb.2019.03.007 ↗
5. Increased capacitance of porous Co0.5Ni0.5Fe2O4 for supercapacitor application10.1016/j.mseb.2017.11.013 ↗
6. Improved preparation of MoS2/graphene composites and their inks for supercapacitors applications10.1016/j.mseb.2020.114700 ↗
7. The preparation and characteristic of poly (3,4-ethylenedioxythiophene)/reduced graphene oxide nanocomposite and its application for supercapacitor electrode10.1016/j.mseb.2016.10.002 ↗
8. Paper-based supercapacitor with screen-printed poly (3, 4-ethylene dioxythiophene)-poly (styrene sulfonate)/multiwall carbon nanotube films actuating both as electrodes and current collectors10.1016/j.tsf.2018.10.029 ↗
9. Supercapacitors based on conducting polymers/nanotubes composites10.1016/j.jpowsour.2005.05.030 ↗
10. Supercapacitor based on electropolymerized polythiophene and multi-walled carbon nanotubes composites10.1016/j.matchemphys.2011.11.074 ↗
11. A new partially reduced graphene oxide nanosheet/polyaniline nanowafer hybrid as supercapacitor electrode material10.1021/ef301795g ↗
12. Graphene-conducting polymer nanocomposite as novel electrode for supercapacitors10.1016/j.jpowsour.2010.11.002 ↗
13. Influence of dopants and carbon nanotubes on polypyrrole electropolymerization and capacitive behavior10.1016/j.matlet.2013.01.123 ↗
14. Polyaniline modified graphene and carbon nanotube composite electrode for asymmetric supercapacitors of high energy density10.1016/j.jpowsour.2013.04.105 ↗
15. In-situ electrochemical polymerization of multi-walled carbon nanotube/polyaniline composite films for electrochemical supercapacitors10.1016/j.synthmet.2008.09.018 ↗
16. Supercapacitors based on graphene–polyaniline derivative nanocomposite electrode materials10.1016/j.electacta.2013.01.039 ↗
17. Three-dimensional N-doped graphene/polyaniline composite foam for high performance supercapacitors10.1016/j.apsusc.2017.09.148 ↗
18. Preparation of graphene nanosheet/carbon nanotube/polyaniline composite as electrode material for supercapacitors10.1016/j.jpowsour.2009.11.028 ↗
19. Homogeneous core-shell NiCo2S4 nanostructures supported on nickel foam for supercapacitors10.1039/C5TA02432C ↗
20. Preparation of cobalt oxide thin films and its use in supercapacitor application10.1016/j.apsusc.2008.02.163 ↗
21. Facile preparation and electrochemical characterization of cobalt oxide/multi-walled carbon nanotube composites for supercapacitors10.1016/j.jpowsour.2011.04.010 ↗
22. Graphene-nickel cobaltite nanocomposite asymmetrical supercapacitor with commercial level mass loading10.1007/s12274-012-0246-x ↗
23. Fabrication and evaluation of 450 F electrochemical redox supercapacitors using inexpensive and high-performance, polyaniline coated, stainless-steel electrodes10.1016/S0378-7753(02)00419-6 ↗
24. Preparation of graphitic oxide10.1021/ja01539a017 ↗
25. Microwave-assisted synthesis of functionalized graphene on Ni foam as electrodes for supercapacitor application10.1016/j.electacta.2013.06.080 ↗
26. Preparation of a graphene nanosheet/polyaniline composite with high specific capacitance10.1016/j.carbon.2009.09.066 ↗
27. Suryanarayana · 2013
28. Humidity sensing properties of poly(o-anisidine)/WO3 composites10.1016/j.snb.2007.06.026 ↗
29. Investigations on the performance of poly(o-anisidine)/graphene nanocomposites for the electrochemical detection of NADH10.1016/j.msec.2015.05.066 ↗
30. Enzymatic synthesis of polyaniline/multi-walled carbon nanotube composite with core shell structure and its electrochemical characterization for supercapacitor application10.1016/j.electacta.2013.12.089 ↗
31. Methanol electrooxidation on platinum microparticles electrodeposited on poly (o-methoxyaniline) films10.1016/j.electacta.2004.06.013 ↗
32. Graphene/Polyaniline Nanofiber Composites as Supercapacitor Electrodes10.1021/cm902876u ↗
33. Facile hydrothermal synthesis of mesoporous nickel oxide/reduced graphene oxide composites for high performance electrochemical supercapacitor10.1016/j.electacta.2014.12.107 ↗
34. Supercapacitor devices based on graphene materials10.1021/jp902214f ↗
35. Morphology and property control of NiO nanostructures for supercapacitor applications10.1186/1556-276X-8-363 ↗
36. Study of mixed ternary transition metal ferrites as potential electrodes for supercapacitor applications10.1016/j.rinp.2016.04.010 ↗
37. Electrochemical investigations of self-doped polyaniline nanofibers as a new electroactive material for high performance redox supercapacitor10.1016/j.synthmet.2009.05.014 ↗
38. Effect of surfactants on capacitance properties of carbon electrodes10.1016/j.electacta.2011.11.059 ↗
39. Facile synthesis of polyaniline/TiO2/graphene oxide composite for high performance supercapacitors10.1016/j.solidstatesciences.2012.03.020 ↗
40. Design and synthesis of ternary cobalt ferrite/graphene/polyaniline hierarchical nanocomposites for high-performance supercapacitors10.1016/j.jpowsour.2013.07.064 ↗
41. Determination of the specific capacitance of conducting polymer/nanotubes composite electrodes using different cell configurations10.1016/j.electacta.2004.10.078 ↗
42. New symmetric and asymmetric supercapacitors based on high surface area porous nickel and activated carbon10.1016/j.jpowsour.2005.10.090 ↗
43. An asymmetric supercapacitor with ultrahigh energy density based on nickel cobalt sulfide nanocluster anchoring multi-wall carbon nanotubes hybrid10.1016/j.jpowsour.2016.04.066 ↗