journal article·2021-02

The photo-electrical performance of the novel CuAlMnFe shape memory alloy film in the diode application

C. Aksu Canbay, A. Tataroğlu, A. Dere, Abdullah G. Al-Sehemi, Abdulkerim Karabulut, A. Bektaş, Ahmed A. Al-Ghamdi, F. Yakuphanoglu

Publisher page

Abstract

Abstract In this study, the Cu-Al-Mn-Fe shape memory alloy (SMA) was prepared using arc melting technique. The alloy was examined with help of X-ray diffraction (XRD) and differential scanning calorimetry (DSC) methods. We fabricated Cu-Al-Mn-Fe/n-Si diode by forming the shape memory alloy thin film on n-type silicon. The current–voltage (I-V) measurement of the diode was carried out under different intensities of illumination. The reverse bias current value of the diode under light was found to be greater than the dark condition. The obtained result shows that the diode displays a photoconducting feature. The main electrical parameters of the structure were obtained from the conventional I-V and Norde method. Besides, the transient photocurrent (TPC) measurement was performed under the various illumination intensity conditions. In addition to these experiments, the measurements of the conductance/capacitance–voltage (G/C-V) were carried out at room temperature and different frequencies. It was found that both G and C are quite sensitive to frequency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Transition Metal Oxide Nanomaterials · Advanced Memory and Neural Computing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Fremond · 1996
2. Otsuka · 1998
3. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
4. Shape memory materials10.1016/S1369-7021(10)70128-0 ↗
5. A look into Cu-based shape memory alloys: Present scenario and future prospects10.1557/jmr.2014.189 ↗
6. Heat treatment and quenching media effects on the thermodynamical, thermoelastical and structural characteristics of a new Cu-based quaternary shape memory alloy10.1016/j.compositesb.2019.106940 ↗
7. Phase equilibria and Heusler phase stability in the Cu-rich portion of the Cu–Al–Mn system10.1016/S0925-8388(97)00425-8 ↗
8. Martensitic transformation in Cu-Mn-Al alloys10.1016/0956-716X(95)00292-4 ↗
9. Influence of aluminum and manganese concentration on the shape memory characteristics of Cu–Al–Mn shape memory alloys10.1016/j.jallcom.2007.04.254 ↗
10. Production and characterization of ternary Heusler shape memory alloy with A new composition
11. A shape memory alloy based on photodiode for optoelectronic applications10.1016/j.jallcom.2018.01.380 ↗
12. Influence of Alloying Element Addition on Cu–Al–Ni High-Temperature Shape Memory Alloy without Second Phase Formation10.1007/s40195-016-0467-1 ↗
13. Applications of shape memory alloys in optics10.1364/AO.37.006811 ↗
14. The effect of quaternary element on the thermodynamic parameters and structure of CuAlMn shape memory alloys10.1007/s00339-013-7880-3 ↗
15. Reaction kinetics in differential thermal analysis10.1021/ac60131a045 ↗
16. Influence of quaternary alloying additions on transformation temperatures and shape memory properties of Cu–Al–Mn shape memory alloy10.1016/j.jallcom.2008.01.128 ↗
17. Microstructural and thermodynamic study of hypoeutectoidal Cu–Al–Ni shape memory alloys10.1016/j.jallcom.2008.03.009 ↗
18. Microstructure and properties of Cu–Al–Fe high-temperature shape memory alloys10.1016/j.mseb.2014.02.001 ↗
19. An exploratory research of calorimetric and structural shape memory effect characteristics of Cu–Al–Sn alloy10.1016/j.physb.2019.411932 ↗
20. Preparation of Cu-Al–Ni shape memory alloy strips by spray deposition-hot rolling route10.1080/02670836.2020.1781354 ↗
21. Thermal and microstructural investigation of Cu–Al–Mn–Mg shape memory alloys10.1007/s00339-014-8643-5 ↗
22. Sze · 1981
23. Rhoderick · 1988
24. Wood · 1994
25. 2003
26. Novel design and microelectronic analysis of highly stable Au/Indigo/n-Si photodiode for optoelectronic applications10.1016/j.solidstatesciences.2019.04.007 ↗
27. A new shape memory alloy film/p-Si solar light four quadrant detector for solar tracking applications10.1016/j.jallcom.2016.07.087 ↗
28. Cu-Al-Mn shape memory alloy based Schottky diode formed on Si10.1016/j.physb.2018.12.024 ↗
29. Hölzl · 1979
30. Barrier height modification in Au/Ti/n-GaAs devices with a HfO2 interfacial layer formed by atomic layer deposition10.1007/s12034-018-1696-x ↗
31. Optical and electrical properties of porous silicon impregnated with Congo Red dye10.1063/1.4854555 ↗
32. Enhanced photoelectrical performance of chemically processed SnS 2 nanoplates10.1039/C6RA20491K ↗
33. A modified forward I ‐ V plot for Schottky diodes with high series resistance10.1063/1.325607 ↗
34. Solar light sensitive photodiode produced using a coumarin doped bismuth oxide composite10.1016/j.mssp.2018.10.009 ↗
35. Effect of illumination intensity on the characteristics of Cu(acac)2/n-Si photodiode10.1016/j.synthmet.2018.09.009 ↗
36. A study of trap and recombination centers in MAPbI 3 perovskites10.1039/C6CP06261J ↗
37. J.C. Moore, C.V. Thompson, A phenomenological model for the photocurrent transient relaxation observed in ZnO-based photodetector devices, Sensors 13 (2013) 9921–9940, doi: 10.3390/s130809921.10.3390/s130809921 ↗
38. Metallo-Phthalocyanines Based Photocapacitors10.1007/s12633-018-9917-x ↗
39. Bube · 1992
40. Rose · 1963
41. Solar light responsive ZnO nanoparticles adjusted using Cd and La Co-dopant photodetector10.1016/j.jallcom.2017.10.167 ↗
42. The synthesis of new bola-amphiphile TPEs and the comparison of current transformer mechanism and structural properties for Al/Bis (HCTA)-TPE/p-Si and Al/Bis (HCOA)-TPE/p-Si heterojunctions10.1016/j.compositesb.2019.05.020 ↗
43. Nicollian · 1982
44. Analysis of interface states in Au/ZnO/p-InP (MOS) structure
45. Frequency- and doping-level influence on electric and dielectric properties of PolySi/SiO2/cSi (MOS) structures10.1007/s00339-018-1684-4 ↗
46. The fabrication of Al/p-Si (MS) type photodiode with (%2 ZnO-doped CuO) interfacial layer by sol gel method and their electrical characteristics10.1016/j.physb.2019.02.038 ↗
47. Silicon based photodetector with Ru(II) complexes organic interlayer10.1016/j.mssp.2018.11.035 ↗
48. The si-sio, interface–electrical properties as determined by the metal-insulator-silicon conductance technique10.1002/j.1538-7305.1967.tb01727.x ↗
49. Electrical properties of Au/polyvinylidene fluoride/n-InP Schottky diode with polymer interlayer10.1016/j.tsf.2014.01.036 ↗
50. Analysis of surface states and series resistance in Au/n-Si Schottky diodes with insulator layer using current–voltage and admittance–voltage characteristics10.1016/j.vacuum.2009.07.003 ↗
51. Analysis of device parameters of Al/In2O3/p-Si Schottky diode10.1016/j.mee.2012.12.026 ↗