journal article·2017-09

Effects of laser cutting on the structural and mechanical properties of carbon nanotube assemblages

Seyram Gbordzoe, Sergey Yarmolenko, Sathya Kanakaraj, Mark R. Haase, Noe T. Alvarez, Ryan Borgemenke, Paa Kwasi Adusei, Vesselin Shanov

Publisher page

Abstract

Abstract Multiple applications of carbon nanotubes (CNTs) require their assembly into macroscopic materials: films, sheets, and ribbons. Most of these macro-materials are flexible thin structures and need to be cut to micrometer dimensions. Laser cutting has emerged as one of the best pressure-free alternative methods, providing accuracy and uniformity. We report on the effect of laser cutting on the structural and mechanical properties of CNT sheet assemblages. Laser cutting forms a significant and deleterious amount of amorphous carbon at and near the cut edge, and this was observed by Raman spectroscopy, transmission electron microscopy, and electron energy loss spectroscopy. The damage can have adverse effects on the physical properties of CNTs and applications based on them. Laser cutting at high power was found to reduce the tensile strength of CNT sheets by as much as 75%. Nevertheless, at smaller cut widths, the mechanical properties were affected irrespective of the laser power.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Diamond and Carbon-based Materials Research · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. About the structure of carbon formed by thermal decomposition of carbon monoxide on iron substrate
2. Carbon deposits from carbon monoxide on iron, cobalt and nickel10.1021/j150533a010 ↗
3. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
4. Thermal properties of graphene and nanostructured carbon materials10.1038/nmat3064 ↗
5. Superstrong ultralong carbon nanotubes for mechanical energy storage10.1002/adma.201100344 ↗
6. Structure-dependent electrical properties of carbon nanotube fibers10.1002/adma.200602966 ↗
7. Superaligned carbon nanotube arrays, films, and yarns: a road to applications10.1002/adma.201003989 ↗
8. Spinning yarn from long carbon nanotube arrays10.1557/jmr.2010.91 ↗
9. Direct spinning of carbon nanotube fibers from chemical vapor deposition synthesis10.1126/science.1094982 ↗
10. Spinning carbon nanotube nanothread under a scanning electron microscope10.3390/ma4091519 ↗
11. Nanotechnology: Spinning continuous carbon nanotube yarns10.1038/419801a ↗
12. Embedded carbon nanotube thread piezoresistive strain sensor performance10.1108/SR-04-2013-653 ↗
13. Strong, transparent, multifunctional, carbon nanotube sheets10.1126/science.1115311 ↗
14. Carbon nanotubes–the route toward applications10.1126/science.1060928 ↗
15. Super-tough carbon-nanotube fibres10.1038/423703a ↗
16. Controlled growth of super-aligned carbon nanotube arrays for spinning continuous unidirectional sheets with tunable physical properties10.1021/nl0723073 ↗
17. Controlled cutting of single-walled carbon nanotubes and low temperature annealing10.1016/j.carbon.2013.06.039 ↗
18. Electron-induced cutting of single-walled carbon nanotubes10.1016/j.carbon.2008.09.043 ↗
19. Carbon nanotube’s modification by focused ion beam irradiation and its healing strategies10.1016/j.nimb.2012.12.111 ↗
20. Focused-ion-beam assisted fabrication of individual multiwall carbon nanotube field emitter10.1016/j.carbon.2005.03.009 ↗
21. Fabrication of carbon nanotube-based nanodevices using a combination technique of focused ion beam and plasma-enhanced chemical vapor deposition10.1063/1.2802552 ↗
22. Laser pruning of carbon nanotubes as a route to static and movable structures10.1002/adma.200390072 ↗
23. Efficient fabrication of carbon nanotube micro tip arrays by tailoring cross-stacked carbon nanotube sheets10.1021/nl300271p ↗
24. Field emission from laser cut CNT fibers and films10.1557/jmr.2013.322 ↗
25. Femtosecond laser machining: a new technique to fabricate carbon nanotube based emitters10.1116/1.3333515 ↗
26. Effect of carbon nanotubes on laser cutting of multi-walled carbon nanotubes/poly methyl methacrylate nanocomposites10.1016/j.optlastec.2014.10.003 ↗
27. K.E. Hix, M. Li, J. Gosciniak, K. Hartke, M. Rendina, L.R. Dosser, et al., Femtosecond and nanosecond laser micromachining of oxidized multi-wall carbon nanotube doped morthane, in: Lasers and Applications in Science and Engineering, International Society for Optics and Photonics, 2005.10.1117/12.592740 ↗
28. CO 2 laser cutting of a carbon/carbon multi-lamelled plain-weave structure10.1016/j.jmatprotec.2005.12.004 ↗
29. Tachibana · 2013
30. Large area patterned arrays of aligned carbon nanotubes via laser trimming10.1088/0957-4484/14/4/305 ↗
31. Role of CO2 laser cutting conditions on anisotropic properties of nanocomposite contain carbon nanotubes10.2351/1.4947491 ↗
32. Carbon nanotube assembly at near-industrial natural-fiber spinning rates10.1016/j.carbon.2015.01.058 ↗
33. Raman spectroscopic characterization of multiwall carbon nanotubes and of composites10.3144/expresspolymlett.2012.63 ↗
34. Raman studies of carbon nanotubes10.1016/0009-2614(93)90040-8 ↗
35. Raman spectroscopy of carbon materials: structural basis of observed spectra10.1021/cm00011a018 ↗
36. Defect characterization in graphene and carbon nanotubes using Raman spectroscopy10.1098/rsta.2010.0213 ↗
37. Carbon-plasma produced in vacuum by 532nm–3ns laser pulses ablation10.1016/j.apsusc.2006.01.042 ↗
38. Thermal conductivity of multi-walled carbon nanotube sheets: radiation losses and quenching of phonon modes10.1088/0957-4484/21/3/035709 ↗
39. Physical properties of carbon nanotube sheets drawn from nanotube arrays10.1016/j.carbon.2012.04.067 ↗
40. Thermal conductivity of multiwalled carbon nanotubes10.1103/PhysRevB.66.165440 ↗
41. Investigating carbonization and graphitization using electron energy loss spectroscopy (EELS) in the transmission electron microscope (TEM)10.1080/14786430701394041 ↗
42. Determination of bonding in amorphous carbon films: a quantitative comparison of core-electron energy-loss spectroscopy and 13C nuclear magnetic resonance spectroscopy10.1063/1.97476 ↗
43. Investigation of atomic structures of diamond-like amorphous carbon by electron energy loss spectroscopy10.1016/S0968-4328(99)00132-8 ↗
44. Angular-resolved EELS of a carbon nanotube10.1016/0040-6090(95)06778-7 ↗
45. Rapid, in situ plasma functionalization of carbon nanotubes for improved CNT/epoxy composites10.1039/C6RA23103A ↗