journal article·2019-01

The effect of vacuum suction casting on the microstructure and corrosion behavior of aluminium alloy 2017

Zbigniew Szklarz, Halina Krawiec, Łukasz Rogal

Publisher page

Abstract

Abstract The effect of the vacuum suction casting method (VSC) on the microstructure and electrochemical response of the as-cast 2017 aluminium alloy is presented. The VSC method allowed to obtain massive samples with very high cooling rate (102–103 K/s). The microstructure of quick cooled sample has been significantly changed. Finer microstructure of the 2017 aluminium alloy after VSC indicate better corrosion resistance in chlorides. This is related to more homogenous distribution of alloying elements. Standard electrochemical studies using open circuit potential (OCP), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) were conducted primarily using global techniques as well as using local technique which employ micro-capillaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. ASM Handbook, Properties and Selection: Nonferrous Alloys and Special Purpose Materials, vol. 2, 1990.
2. J.R. Brown, Foseco Non-Ferrous Foundryman’s Handbook, 1999.
3. E.H. Hollingsworth, H.Y. Hunsicker, Corrosion of Aluminium and Aluminium Alloys, ASM Handbook, vol. 13, 1987.
4. Nisancioglu · J. Electrochem. Soc. · 1990 · 137 · 6910.1149/1.2086441 ↗
5. J.G. Kaufman, E.L. Rooy, Aluminium Alloy Castings: Properties, Processes and Applications, Ch.3, (2004) 21–37.
6. I.J. Polmear, Light Alloys – From Traditional Alloys to Nanocrystals, 2006.
7. L. Katgerman, D. Eskin, Hardening, Annealing, and Aging, Handbook of Aluminium, Physical Metallurgy and Processes, vol. 1, 2003.10.1201/9780203912591.ch5 ↗
8. Review of precipitation in Al-Cu-Mg(-Li) alloys10.1179/174328005X14357 ↗
9. The effect of intermetallics on the fracture mechanism in AlSi1MgMn alloy
10. Effect of second phase precipitation behavior on mechanical properties of casting Al-Cu alloys
11. Thermoelectric power characterization of a 2024 aluminum alloy during solution treatment and aging10.1016/1044-5803(96)00002-2 ↗
12. J.G. Kaufman, E.L. Rooy, Castings Properties, Processes, and Applications, 2004.
13. V.S. Zolotorevsky, N.A. Belov, M.V. Glazoff, Casting Aluminium Alloys, 2007.10.1016/B978-008045370-5.50007-9 ↗
14. Precipitate effects on the mechanical behavior of aluminum copper alloys: Part I. Experiments10.1007/s11661-005-0190-4 ↗
15. G.F. Dirras, P. Donnadieu, J. Douin, Dislocation/Precipitate Interaction Mechanisms in 6xxx Aluminium Alloys.
16. Rapid solidification processing with specific application to aluminium alloys10.1179/imr.1992.37.1.1 ↗
17. Preparation and structural characterization of rapidly solidified AlCu alloys10.1016/j.jmst.2013.12.001 ↗
18. Effect of quenching rate on microstructure and stress corrosion cracking of 7085 aluminum alloy10.1016/S1003-6326(11)61138-2 ↗
19. The effect of quench rate and overageing temper on the corrosion behaviour of AA705010.1016/j.corsci.2013.10.010 ↗
20. Mechanism of low exfoliation corrosion resistance due to slow quenching in high strength aluminium alloy10.1016/j.corsci.2014.11.024 ↗
21. The electrochemical behaviour of the Al2Cu intermetallic compound10.1016/0010-938X(83)90034-3 ↗
22. Local electrochemical studies of the microstructural corrosion of AlCu4Mg1 as-cast aluminium alloy and influence of applied strain10.1007/s10008-008-0638-8 ↗
23. Influence of applied strain on the microstructural corrosion of AlMg2 as-cast aluminium alloy in sodium chloride solution10.1016/j.corsci.2012.08.047 ↗
24. Electrochemical characteristics of intermetallic phases in aluminum alloys10.1149/1.1869984 ↗
25. Microelectrochemical studies of pit initiation at single inclusions in Al 2024-T310.1149/1.1344530 ↗
26. Localized corrosion of 1913 T240 aluminium alloy in chloride media10.1016/S0010-938X(98)00116-4 ↗
27. Influence of cooling rate on the microstructure and corrosion behavior of Al–Fe alloys10.1016/j.corsci.2015.08.017 ↗
28. Pitting potential of high purity binary aluminium alloys – I. AlCu alloys. Pitting and intergranular corrosion10.1016/0010-938X(77)90044-0 ↗
29. Pitting potential of high purity binary aluminium alloys – II. AlMg and AlZn alloys10.1016/S0010-938X(77)80014-0 ↗
30. Development in corrosion resistance by microstructural refinement in Zr-16 SS 304 alloy using suction casting technique10.1016/j.materresbull.2016.04.016 ↗
31. Microstructure and mechanical properties of Mg−6Gd−3Y−0.5Zr alloy processed by high-vacuum die-casting10.1016/S1003-6326(14)63531-7 ↗
32. Microstructure evolution and mechanical properties’ improvement of NiAl–Cr(Mo)–Hf eutectic alloy during suction casting and subsequent HIP treatment10.1016/j.intermet.2009.05.003 ↗
33. Effect of cooling rate on solidification parameters and microstructure of Al−7Si−0.3Mg−0.15Fe alloy10.1016/S1003-6326(14)63236-2 ↗
34. Simulation of secondary dendritic arm spacing of free cutting steel 38MnVS10.1016/S1006-706X(11)60078-2 ↗
35. Perez · 2004
36. Schweitzer · 2009
37. Micro- and nanotechniques to study localized corrosion10.1016/0013-4686(95)00072-M ↗
38. Microelectrodes for studies of localized corrosion processes10.1016/S0013-4686(98)00025-5 ↗
39. A new microelectrochemical method to study pit initiation on stainless steels10.1016/S0013-4686(70)01783-8 ↗
40. Combining the electrochemical microcell technique and the electron backscatter diffraction method to study the electrochemical behaviour of polycrystalline aluminium in sodium chloride solution10.1016/j.electacta.2016.03.030 ↗
41. Localized dissolution initiated at single and clustered intermetallic particles during immersion of Al–Cu–Mg alloy in sodium chloride solution10.1016/S1003-6326(16)64408-4 ↗
42. Investigation of dealloying of S phase (Al2CuMg) in AA 2024–T3aluminium alloy using high resolution 2D and 3D electron imaging10.1016/j.corsci.2015.11.013 ↗
43. M.E. Orazem, B. Tribollet, Electrochemical Impedance Spectroscopy, Chapter 13.