journal article·2012-12

Eutectic and solid-state wafer bonding of silicon with gold

Maryam Abouie, Qi Liu, Douglas G. Ivey

Materials Science and Engineering: B· Volume 177· Issue 20
Publisher page

Abstract

Abstract The simple Au Si eutectic, which melts at 363 °C, can be used to bond Si wafers. However, faceted craters can form at the Au/Si interface as a result of anisotropic and non-uniform reaction between Au and crystalline silicon (c-Si). These craters may adversely affect active devices on the wafers. Two possible solutions to this problem were investigated in this study. One solution was to use an amorphous silicon layer (a-Si) that was deposited on the c-Si substrate to bond with the Au. The other solution was to use solid-state bonding instead of eutectic bonding, and the wafers were bonded at a temperature (350 °C) below the Au Si eutectic temperature. The results showed that the a-Si layer prevented the formation of craters and solid-state bonding not only required a lower bonding temperature than eutectic bonding, but also prevented spill out of the solder resulting in strong bonds with high shear strength in comparison with eutectic bonding. Using amorphous silicon, the maximum shear strength for the solid-state Au Si bond reached 15.2 MPa, whereas for the eutectic Au Si bond it was 13.2 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Harendt · Journal of Micromechanics and Microengineering · 1992 · 2 · 11310.1088/0960-1317/2/3/001 ↗
2. Barth · Sensors and Actuators A · 1990 · 23 · 91910.1016/0924-4247(90)87060-V ↗
3. Wei · Journal of Micromechanics and Microengineering · 2003 · 13 · 21710.1088/0960-1317/13/2/308 ↗
4. Lee · Sensors and Actuators A · 2000 · 85 · 33010.1016/S0924-4247(00)00338-1 ↗
5. Niklaus · Journal of Applied Physics · 2006 · 99 · 03110110.1063/1.2168512 ↗
6. Park · Electrochemical and Solid-State Letters · 2005 · 8 · G33010.1149/1.2077077 ↗
7. Wolffenbuttel · Sensors and Actuators A · 1994 · 43 · 2210.1016/0924-4247(93)00653-L ↗
8. Lin · 2009 · 244
9. Jing · Journal of Micromechanics and Microengineering · 2010 · 20 · 09501410.1088/0960-1317/20/9/095014 ↗
10. Lani · ECS Transactions · 2008 · 16 · 14710.1149/1.2982864 ↗
11. Chen · 2003 · 187
12. Evans · 2010
13. Tiensuu · Sensors and Actuators A · 1994 · 45 · 22710.1016/0924-4247(94)00836-1 ↗
14. Wohenbuttel · Sensors and Actuators A · 1994 · 43 · 22310.1016/0924-4247(93)00653-L ↗
15. Chen · Applied Physics Letters · 2007 · 90 · 13212010.1063/1.2719025 ↗
16. Lin · Transducers · 2009 · 244
17. Lani · Microsystem Technologies · 2006 · 12 · 102110.1007/s00542-006-0228-6 ↗
18. Dragoi · 2009 · 1139
19. Gillard · 2006
20. Scholz · Applied Physics Letters · 2009 · 94 · 01210810.1063/1.3059560 ↗
21. Knaepen · Journal of Applied Physics · 2009 · 105 · 08353210.1063/1.3110722 ↗
22. Hiraki · Journal of the Electrochemical Society · 1980 · I27 · 266210.1149/1.2129568 ↗
23. Calcagno · Journal of Applied Physics · 1989 · 66 · 187410.1063/1.344491 ↗
24. Gall · Thin Solid Films · 2006 · 511 · 94510.1016/j.tsf.2005.12.067 ↗
25. Yeh · Journal of Electronic Materials · 2012 · 41 · 179610.1007/s11664-011-1796-5 ↗