Subwavelength LIPSS formation on SS304 by picosecond laser irradiation under water confinement
Source abstract
Abstract
Laser induced periodic surface structures were generated in a single step by applying picosecond laser irradiation at different repetition rates on a surface area of 15 × 15 mm2 of a stainless steel-304 probe immersed in a confinement liquid medium and on ambient air. Periodicity modification from high to low spatial surface frequency LIPSS was observed by modifying the pulse repetition rate from 1.3 to 402 kHz at a constant fluence (7 J/cm2) under water confinement. Additional experiments at lower fluences (1.78 and 5.33 J/cm2) were performed to evaluate the periodicity under water confinement. Wettability analysis of the processed area yielded significative changes on the drop contact angle showing a wetting transition from hydrophilicity to hydrophobicity of the samples surface treated by multiple impact pulses under water confinement.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Laser-induced spectroscopy and plasma · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Surface structures induced by ultrashort laser pulses: Formation mechanisms of ripples and grooves10.1016/j.apsusc.2015.07.016 ↗
2. Multiscale micro-/nanostructures on single crystalline SiC fabricated by hybridly polarized femtosecond laser10.1016/j.optlaseng.2019.105940 ↗
3. Femtosecond laser-induced large area of periodic structures on chalcogenide glass via twice laser direct-writing scanning process10.1016/j.optlastec.2019.105977 ↗
4. Femtosecond laser fabrication of LIPSS-based waveplates on metallic surfaces10.1016/j.apsusc.2020.146328 ↗
5. Guiding of LIPSS formation by excimer laser irradiation of pre-patterned polymer films for tailored hierarchical structures10.1016/j.apsusc.2019.144785 ↗
6. Tribological performance of metal-reinforced ceramic composites selectively structured with femtosecond laser-induced periodic surface structures10.1016/j.apsusc.2019.143917 ↗
7. Fast LIPSS based texturing process of dental implants with complex geometries10.1016/j.cirp.2020.04.065 ↗
8. Fabrication of grooves on polymer-derived SiAlCN ceramics using femtosecond laser pulses10.1016/j.ceramint.2020.01.209 ↗
9. Generation and Characterization of Laser Induced Periodic Surface Structures on Plastic Injection Molds10.1007/s40516-020-00115-1 ↗
10. Electrostatically assembled multilayered films of biopolymer enhanced nanocapsules for on-demand drug release10.1021/acsabm.9b00381 ↗
11. Picosecond laser-induced periodic surface structures (LIPSS) on crystalline silicon10.1016/j.surfin.2020.100538 ↗
12. Observation of single ultrashort laser pulse generated periodic surface structures on linelike defects10.2351/7.0000075 ↗
13. Angle- and polarization-dependent reflection and backscattering from FS-LIPSS covered stainless steel surfaces: experimental study10.1140/epjp/s13360-020-00396-7 ↗
14. LIPSS on thin metallic films: New insights from multiplicity of laser-excited electromagnetic modes and efficiency of metal oxidation10.1016/j.apsusc.2019.05.171 ↗
15. Laser-induced periodic surface structure. I. Theory10.1103/PhysRevB.27.1141 ↗
16. On the role of surface plasmon polaritons in the formation of laser-induced periodic surface structures upon irradiation of silicon by femtosecond-laser pulses10.1063/1.3261734 ↗
17. Femtosecond laser fabrication of highly hydrophobic stainless steel surface with hierarchical structures fabricated by combining ordered microstructures and LIPSS10.1016/j.apsusc.2015.09.261 ↗
18. Fabrication of hierarchical surface textures using multi-pulse direct laser interference patterning with nanosecond pulses10.1016/j.matlet.2019.126743 ↗
19. Picosecond laser-induced hierarchical periodic nearand deep-subwavelength ripples on stainless-steel surfaces10.3390/nano10010062 ↗
20. Underwater and water-assisted laser processing: Part 1—general features, steam cleaning and shock processing10.1016/S0143-8166(02)00142-2 ↗
21. Picosecond pulsed underwater laser ablation of silicon and stainless steel: Comparing crater analysis methods and analysing dependence of crater characteristics on water layer thickness10.1016/j.apsusc.2020.148005 ↗
22. Homogeneous low spatial frequency LIPSS on dielectric materials generated by beam-shaped femtosecond pulsed laser irradiation
23. Sub-micron and nanosized features in laser-induced periodic surface structures10.1007/s12648-018-1323-0 ↗
24. Applying ultrashort pulsed direct laser interference patterning for functional surfaces10.1038/s41598-020-60592-4 ↗
25. Generation of high spatial frequency ripples on silicon under ultrashort laser pulses irradiation10.1063/1.3593493 ↗
26. Rippled area formed by surface plasmon polaritons upon femtosecond laser double-pulse irradiation of silicon: the role of carrier generation and relaxation processes10.1007/s00339-013-8205-2 ↗
27. Biomimetic construction of hierarchical structures via laser processing10.1364/OME.7.002208 ↗
28. Femtosecond versus picosecond laser ablation (Keynote Address)10.1117/12.597975 ↗
29. Superhydrophobic surfaces fabricated by microstructuring of stainless steel using a femtosecond laser10.1016/j.apsusc.2009.07.061 ↗
30. Wetting behaviour of femtosecond laser textured Ti-6Al-4V surfaces10.1016/j.apsusc.2012.11.085 ↗
31. Wetting properties of LIPSS structured silicon surfaces10.1140/epjb/e2019-90672-2 ↗
32. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
33. Controlling the Wettability of Steel Surfaces Processed with Femtosecond Laser Pulses10.1021/acsami.8b13908 ↗
34. Roles of chemistry modification for laser textured metal alloys to achieve extreme surface wetting behaviors10.1016/j.matdes.2020.108744 ↗
35. Design of chemical surface treatment for laser-textured metal alloys to achieve extreme wetting behavior10.1021/acsami.9b21438 ↗
36. Biomimetic surface structures in steel fabricated with femtosecond laser pulses: Influence of laser rescanning on morphology and wettability10.3762/bjnano.9.262 ↗
37. Wettability of porous surfaces10.1039/tf9444000546 ↗
38. Surface tension at elevated temperatures. I. Furnace and method for use of the sessile drop method; surface tension of silicon, iron and nickel10.1021/j150504a026 ↗
39. Grain size measurement by the intercept method10.1016/0026-0800(71)90005-X ↗
40. Correlative microscopy for quantification of prior austenite grain size in AF9628 steel
41. Continuous modulations of femtosecond laser-induced periodic surface structures and scanned line-widths on silicon by polarization changes10.1364/OE.21.015505 ↗
42. The laser polarization as control parameter in the formation of laser-induced periodic surface structures: comparison of numerical and experimental results10.1016/j.apsusc.2010.11.157 ↗
43. Formation of laser-induced periodic surface structures (LIPSS) on tool steel by multiple picosecond laser pulses of different polarizations10.1016/j.apsusc.2016.06.174 ↗
44. G. Raciukaitis, M. Brikas, P. Gecys, M. Gedvilas, Accumulation effects in laser ablation of metals with high-repetition-rate lasers, in: C.R. Phipps (Ed.), Proc. Vol. 7005, High-Power Laser Ablation VII, Taos, New Mexico, United States, 2008: p. 70052L. https://doi.org/10.1117/12.782937.10.1117/12.782937 ↗
45. Anti-icing aluminum alloy surface with multi-level micro-nano textures constructed by picosecond laser10.1016/j.matdes.2019.108156 ↗
46. Nanosecond laser fabrication of superhydrophobic Ti6Al4V surfaces assisted with different liquids10.1016/j.colcom.2020.100256 ↗
47. Shock waves from a water-confined laser-generated plasma10.1063/1.366113 ↗
48. Laser-shock processing of aluminium-coated 55C1 steel in water-confinement regime, characterization and application to high-cycle fatigue behaviour10.1023/A:1004331205389 ↗
49. Self-organized nanogratings in glass irradiated by ultrashort light pulses10.1103/PhysRevLett.91.247405 ↗
50. Liquid assisted ablation of zirconium for the growth of LIPSS at varying pulse durations and pulse energies by femtosecond laser irradiation10.1016/j.nimb.2015.02.017 ↗
51. Effects of liquid depth on the expansion and collapse of a hemispherical cavitation bubble induced in nanosecond pulsed laser ablation of a solid in liquid10.1016/j.optlaseng.2019.105937 ↗
52. Use of cavitating Jet for
53. The residual stress, texture and surface changes in steel induced by cavitation10.1016/0043-1648(91)90302-B ↗
54. Laser cavitation peening of gray cast iron: Effect of coverage layer on the surface integrity10.1016/j.apsusc.2020.146295 ↗
55. Cavitation peening: A review10.3390/met10020270 ↗
56. Stress-induced solid flow drives surface nanopatterning of silicon by ion-beam irradiation10.1103/PhysRevB.86.214107 ↗
57. Structure formation on the surface of indium phosphide irradiated by femtosecond laser pulses10.1063/1.1827919 ↗
58. Mechanisms of ultrafast laser-induced deep-subwavelength gratings on graphite and diamond10.1103/PhysRevB.79.125436 ↗
59. Mechanism for self-formation of periodic grating structures on a metal surface by a femtosecond laser pulse10.1103/PhysRevB.79.033409 ↗
60. A. Rudenko, C. Mauclair, F. Garrelie, R. Stoian, Self-organization of surfaces on the nanoscale by topography-mediated selection of quasi- cylindrical and plasmonic waves, 8 (2019) 459–465.10.1515/nanoph-2018-0206 ↗
61. The role of original surface roughness in laser-induced periodic surface structure formation process on poly-carbonate films10.1016/j.tsf.2003.11.086 ↗
62. Surface plasmon polaritons: Physics and applications10.1088/0022-3727/45/11/113001 ↗
63. Influence of polishing orientation on the generation of LIPSS on stainless steel10.2961/jlmn.2016.01.0025 ↗
64. Laser Induced Periodic Surface Structures induced by surface plasmons coupled via roughness10.1016/j.apsusc.2013.10.141 ↗
65. Surface topography following pulsed laser texturing: Implications for adhesion and wettability10.1088/2051-672X/ab5c82 ↗
66. Time dependency of the hydrophilicity and hydrophobicity of metallic alloys subjected to femtosecond laser irradiations10.1016/j.apsusc.2013.02.054 ↗
67. Nanosecond pulsed laser processing turns engineering metal alloys antireflective and superwicking10.1016/j.jmapro.2020.02.029 ↗