Detection of Zn in water using novel functionalised planar microwave sensors
Source abstract
Abstract
Metal pollution in aquatic environments has attracted global attention. Current methods are not able to monitor water quality in-situ at low-cost. This paper reports on a novel approach for detecting changes in the concentration of zinc in water using electrical and a microwave sensor method, adopting two planar sensors: one was functionalised with a screen-printed β-Bi2O3 based coating, while the other was uncoated. Results show that both electrical and the microwave sensor responses were dependent on the presence and concentration of Zn in water with R2 = 0.93-0.99. The functionalised sensor with a 60 μm thick β-Bi2O3 based film offers improved performance compared with both uncoated and functionalised sensors with 40 μm thick coating for detecting the changes of Zn concentrations in water for low levels (100 and 500 μg/L). This novel sensing system could be a cost-effective alternative to the current offline methods.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical Analysis and Applications · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Tackling mine wastes10.1126/science.aaf3354 ↗
2. Impacts of lead/zinc mining and smelting on the environment and human health in China10.1007/s10661-011-2115-6 ↗
3. The essential toxin: impact of zinc on human health10.3390/ijerph7041342 ↗
4. A national strategy for identification, prioritisation and management of pollution from abandoned non-coal mine sites in England and Wales. I10.1016/j.scitotenv.2009.06.019 ↗
5. K.S. Smith, Metal sorption on mineral surfaces: an overview with examples relating to mineral deposits, 1999.
6. The impairment of river systems by metal mine contamination: a review including remediation options10.1080/10643389.2011.574103 ↗
7. UK Technical Adivisory Group on the Water Framework Directive, UK environmental standards and conditions, https://www.wfduk.org/resources%20/uk-environmental-standards-and-conditions-report-phase-1, 2008.
8. United States Environmental Protection Agency, Quality criteria for water, Washington, DC 20460: EPA; 1986.
9. Wolkersdorfer · 2008
10. Mine water geochemistry and metal flux in a major historic Pb-Zn-F orefield, the Yorkshire Pennines, UK10.1007/s11356-013-1513-4 ↗
11. K.X. Yang, M.E. Kitto, J.P. Orsini, K. Swami, S.E. Beach, Evaluation of sample pretreatment methods for multiwalled and single-walled carbon nanotubes for the determination of metal impurities by ICPMS, ICPOES, and instrument neutron activation analysis, 8 ed., Royal Society of Chemistry, 2010, pp. 1290–1297.10.1039/c0ja00012d ↗
12. A review on detection of heavy metal ions in water – an electrochemical approach10.1016/j.snb.2015.02.122 ↗
13. Towards the review of the European Union Water Framework management of chemical contamination in European surface water resources10.1016/j.scitotenv.2016.10.104 ↗
14. Heavy metal monitoring, analysis and prediction in lakes and rivers: state of the art10.1007/s11356-017-8715-0 ↗
15. Detection of low-concentration heavy metal ions using optical microfiber sensor10.1016/j.snb.2016.06.053 ↗
16. Detection of heavy metal ions in contaminated water by surface plasmon resonance based optical fibre sensor using conducting polymer and chitosan10.1016/j.foodchem.2014.06.045 ↗
17. Characterization of disposable optical sensors for heavy metal determination10.1016/j.talanta.2012.03.006 ↗
18. Enhanced bio-inspired microsensor based on microfluidic/bacteria/love wave hybrid structure for continuous control of heavy metals toxicity in liquid medium10.1016/j.snb.2014.01.104 ↗
19. A bi-enzymatic whole cell conductometric biosensor for heavy metal ions and pesticides detection in water samples10.1016/j.bios.2004.09.032 ↗
20. Electrochemical sensing of heavy metal ions with inorganic, organic and bio-materials10.1016/j.bios.2014.07.052 ↗
21. Electrochemical sensors and devices for heavy metals assay in water: the French groups' contribution10.3389/fchem.2014.00019 ↗
22. A review on various electrochemical techniques for heavy metal ions detection with different sensing platforms10.1016/j.bios.2017.03.031 ↗
23. Theoretical basis and application for measuring pork loin drip loss using microwave spectroscopy10.3390/s16020182 ↗
24. A microwave ring resonator sensor for early detection of breaches in pipeline coatings10.1109/TIE.2017.2733449 ↗
25. Microwave detection of metastasized breast cancer cells in the lymph node; potential application for sentinel lymphadenectomy10.1023/B:BREA.0000032979.52773.fb ↗
26. Microwave dielectric spectroscopy for the determination of pork meat quality10.1016/j.foodres.2010.09.003 ↗
27. Non-destructive evaluation of an activated carbon using microwaves to determine residual life10.1016/j.carbon.2012.06.034 ↗
28. Liquid sensing in aquatic environment using high quality planar microwave resonator10.1016/j.snb.2015.11.063 ↗
29. Flexible electromagnetic wave sensor operating at GHz frequencies for instantaneous concentration measurements of NaCl, KCl, MnCl2 and CuCl solutions10.1088/0957-0233/25/6/065105 ↗
30. Detecting the presence and concentration of nitrate in water using microwave spectroscopy10.1109/JSEN.2017.2705281 ↗
31. Ferrari · 2012 · 193
32. Prudenziati · 1994
33. Development of a novel gas sensor based on oxide thick films10.1016/j.mseb.2004.12.061 ↗
34. Dielectric response of interdigital chemocapacitors: The role of the sensitive layer thickness10.1016/j.snb.2005.08.019 ↗
35. Design of surface modifications for nanoscale sensor applications10.3390/s150101635 ↗
36. Performance of coating materials on planar electromagnetic sensing array to detect water contamination10.1109/JSEN.2017.2720701 ↗
37. Kinetics of adsorption of metal ions on inorganic materials: a review10.1016/j.cis.2010.12.004 ↗
38. A decade with bismuth-based electrodes in electroanalysis10.1002/elan.200970017 ↗
39. Coating methods, modifiers and applications of bismuth screen-printed electrodes10.1016/j.trac.2013.01.012 ↗
40. An electrochemical sensor based on the reduction of screen-printed bismuth oxide for the determination of trace lead and cadmium10.1016/j.snb.2008.08.039 ↗
41. Disposable bismuth oxide screen printed electrodes for the high throughput screening of heavy metals10.1002/elan.200900266 ↗
42. I. Frau, O. Korostynska, P. Byrne, A. Mason, Feasibility of in-situ quality assessment of zinc contamination in water, 2017, IEEE First Ukraine Conference on Electrical and Computer Engineering (UKRCON), Kiev, pp. 249–522017, pp. 249–252.10.1109/UKRCON.2017.8100485 ↗
43. Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms studies of equilibrium sorption of Zn2+ unto phosphoric acid modified rice husk10.9790/5736-0313845 ↗
44. Microwaves and functional materials: a novel method to continuously detect metal ions in water
45. Advanced nanomaterial inks for screen-printed chemical sensors10.1016/j.snb.2016.12.022 ↗
46. Effect of bismuth oxide thick film overlay on microstrip patch antenna10.1108/13565361011034759 ↗
47. Metamaterials application in sensing10.3390/s120302742 ↗
48. Microwave sensors: a new sensing principle. Application to humidity detection10.1016/S0925-4005(00)00466-4 ↗
49. Critical control of flooding and draining sequences on the environmental risk of Zn-contaminated riverbank sediments10.1007/s11368-016-1646-4 ↗
50. Drainage at abandoned mine sites: natural attenuation of contaminants in different seasons10.1007/s10230-011-0146-4 ↗
51. Printed sensors produced via thick-film technology for the use in monitoring applications10.1016/j.protcy.2014.09.061 ↗