journal article·2018-10

The mechanical and photocatalytic properties of modified gypsum materials

Magdalena Janus, Justyna Zatorska, Kamila Zając, Ewelina Kusiak-Nejman, Adam Czyżewski, Antoni W. Morawski

Publisher page

Abstract

Abstract Co-modified TiO2 photocatalysts (TiO2-N,C) were added to commercial gypsum to obtain self-cleaning building material. The gypsum/TiO2 composite were also studied towards their mechanical properties. The highest photocatalytic activity was obtained for gypsum samples containing TiO2/N,C photocatalyst treated at 100–300 °C, attributed to high anatase phase participation, relatively high nitrogen and carbon content and high BET surface area (ca. 170–270 m2/g). In this case (300 °C) the model pollutant (azo dye) degradation rate was 85% and 70% after 15 h of UV and vis irradiation, respectively. Higher compressive strength values was observed for gypsum sample loaded with photocatalysts treated at higher temperatures (600–800 °C), attributed to rutile phase presence and large crystallite size. The grinding operation during gypsum/TiO2 composite preparation can contribute towards the increase of compressive strength (even 40%) by reduction of gypsum particle size whereas photocatalyst particles act as the effective fillers of void spaces in gypsum material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Concrete and Cement Materials Research · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Photocatalytic NO removal of concrete surface layers intermixed with TiO210.1016/j.buildenv.2013.08.017 ↗
2. TiO2 photocatalysis in cementitious systems: insights into self–cleaning and depollution chemistry10.1016/j.cemconres.2011.12.001 ↗
3. An investigation of LiNbO3 photocatalyst coating on concrete surface for improving indoor air quality10.1016/j.conbuildmat.2013.12.072 ↗
4. Metakaolinite/TiO2 composite: photoactive admixture for building materials based on Portland cement binder10.1016/j.conbuildmat.2012.02.086 ↗
5. Solvothermal synthesis of mesoporous TiO2: the effect of morphology, size and calcination progress on photocatalytic activity in the degradation of gaseous benzene10.1016/j.cej.2013.10.028 ↗
6. Enhancement of the photocatalytic performance of Ni-loaded TiO2 photocatalyst under sunlight10.1016/j.ceramint.2013.08.030 ↗
7. Characteristics of blended cements containing nano-silica10.1016/j.hbrcj.2013.09.001 ↗
8. Effect of nano-silica on rheology and fresh properties of cement pastes and mortars10.1016/j.conbuildmat.2009.02.005 ↗
9. UV/TiO2 photocatalytic oxidation of commercial dyes in aqueous solutions10.1016/0045-6535(95)80015-D ↗
10. Influence of amine template on the photoactivity of TiO2 nanoparticles obtained by hydrothermal treatment10.1016/j.apcatb.2007.09.019 ↗
11. Preparation, characterization, and photocatalytic activity of boron and lanthanum co-doped TiO210.1016/j.catcom.2013.11.008 ↗
12. Tuning the relative concentration ratio of bulk defects to surface defects in TiO2 nanocrystals leads to high photocatalytic efficiency10.1021/ja207826q ↗
13. Photocatalytic degradation of organic dyes in the presence of nanostructured titanium dioxide: influence of the chemical structure of dyes10.1016/j.molcata.2010.05.023 ↗
14. Visible-light-active titanium oxide photocatalyst realized by an oxygen–deficient structure and by nitrogen doping10.1016/S0926-3373(02)00269-2 ↗
15. Enhanced nitrogen doping in TiO2 nanoparticles10.1021/nl034332o ↗
16. Effect of calcined atmosphere on the photocatalytic activity of P-doped TiO210.1016/j.apsusc.2013.10.157 ↗
17. Synthesis of WC-TiC35-Co10 nanocomposite powder by a novel method10.1016/j.ijrmhm.2003.10.001 ↗
18. Sulfur-doping of rutile-titanium dioxide by ion implantation: photocurrent spectroscopy and first-principles band calculation studies10.1063/1.1565693 ↗
19. The structural, optical, magnetic and photocatalytic properties of transition metal ions doped TiO2 nanoparticles10.1016/j.jallcom.2013.07.041 ↗
20. Effect of C content and calcination temperature on the photocatalytic activity of C-doped TiO2 catalyst10.1016/j.seppur.2013.05.018 ↗
21. Synergic photocatalytic effects of nitrogen and niobium co-doping in TiO2 for the redox conversion of aquatic pollutants under visible light10.1016/j.jcat.2013.05.014 ↗
22. Photocatalytic degradation of NOx in a pilot street canyon configuration using TiO2-mortar panels10.1007/s10661-007-9722-2 ↗
23. Photocatalytic discoloration of organic compounds on outdoor building cement panels modified by photoactive coatings10.1016/j.jphotochem.2006.12.032 ↗
24. Nanotechnology in concrete-a review10.1016/j.conbuildmat.2010.03.014 ↗
25. Photocatalytic activity of titanium dioxide nanoparticle coatings applied on autoclaved aerated concrete: effect of weathering on coating physical characteristics and gaseous toluene removal10.1016/j.jhazmat.2011.12.037 ↗
26. Titanium dioxide coated cementitious materials for air purifying purposes: preparation, characterization and toluene removal potential10.1016/j.buildenv.2009.09.003 ↗
27. Predicting the core compressive strength of self-compacting concrete (SCC) mixtures with mineral additives using artificial neural network10.1016/j.conbuildmat.2010.11.108 ↗
28. Investigating the properties of lightweight concrete containing high contents of recycled green building materials10.1016/j.conbuildmat.2013.06.040 ↗
29. Mechanical strength, durability and drying shrinkage of structural mortar containing HCWA as partial replacement of cement10.1016/j.conbuildmat.2011.12.009 ↗
30. Durability of nano-engineered TiO2 self-cleaning treatments on limestone10.1016/j.conbuildmat.2014.04.112 ↗
31. Effect of nano-sized titanium dioxide on early age hydration of Portland cement10.1007/978-3-642-00980-8_35 ↗
32. Microstructure of cement mortar with nanoparticles10.1016/S1359-8368(03)00052-0 ↗
33. Physico-mechanical properties, potent adsorptive and photocatalytic efficacies of sulfate resisting cement blends containing micro silica and nano-TiO210.1016/j.conbuildmat.2013.11.026 ↗
34. U.E., Directive 2008/50/EC of the European Parliament and of the Council on ambient air quality and cleaner air for Europe. Official Journal of the European Union, L152/1, 2008.
35. B. Berglund, B. Brunekreef, H. Knoppel, T. Undvaij, M. Maroni, L. Mblhave, P. Skov, Effects of Indoor Air Pollution on Human Health-Report no. 10. Commission of the European Communities, Luxembourg, 1991.
36. Photocatalytic oxidation for indoor air purification: a literature review10.1016/S0360-1323(02)00212-3 ↗
37. Inspection and diagnosis system for gypsum plasters in partition walls and ceilings10.1016/j.conbuildmat.2010.11.015 ↗
38. Photocatalytic activation of gypsum cements10.1134/S1070427217010086 ↗
39. Photocatalytic oxidation of nitric oxide with immobilized titanium dioxide films synthesized by hydrothermal method10.1016/j.jhazmat.2007.05.050 ↗
40. Preliminary studies of photocatalytic activity of gypsum plasters containing TiO2 co-modified with nitrogen and carbon10.1515/pjct-2015-0036 ↗
41. Induced self-cleaning properties towards Reactive Red 198 of the cement materials loaded with co-modified TiO2/N, C photocatalysts
42. Visible-light photocatalysis in nitrogen-doped titanium oxides10.1126/science.1061051 ↗
43. Efficient photochemical water splitting by a chemical modified n–TiO210.1126/science.1075035 ↗
44. Ti3+ and carbon co-doped TiO2 with improved visible light photocatalytic activity10.1016/S1872-2067(14)60093-0 ↗
45. Carbon-modified TiO2 photocatalyst by ethanol carbonization10.1016/j.apcatb.2005.10.005 ↗
46. Adsorption of CO2 on C,N-TiO2 surfaces10.1260/0263-6174.30.10.807 ↗
47. Synthesis of nanocrystalline anatase TiO2 by one-pot two-phase separated hydrolysis-solvothermal processes and its high activity for photocatalytic degradation of rhodamine B10.1016/j.jhazmat.2009.11.008 ↗
48. Enhanced adsorption and visible-light-induced photocatalytic activity of hydroxyapatite modified Ag-TiO2 powders10.1016/j.apsusc.2010.04.022 ↗
49. Influence of ammonia on the morphologies and enhanced photocatalytic activity of TiO2 micro/nanospheres10.1016/j.apsusc.2011.01.002 ↗
50. Photocatalytic activity of TiO2-SiO2 nanocomposites applied to buildings: influence of particle size and loading10.1016/j.apcatb.2013.01.021 ↗
51. Incorporation of titanium dioxide nanoparticles in mortars – Influence of microstructure in the hardened state properties and photocatalytic activity10.1016/j.cemconres.2012.09.007 ↗
52. Heterogeneous photocatalysis10.1021/cr00017a016 ↗
53. Mechano-chemical activation of high-Ca flyash by cement free blending and gypsum aided grinding10.1016/j.conbuildmat.2013.02.050 ↗
54. M.E. Barbour, D.J. O’Sullivan, D.C. Jagger, Chlorhexidine adsorption to anatase and rutile titanium dioxide, 307 (2007) 116–120.10.1016/j.colsurfa.2007.05.010 ↗
55. Atomistic simulation of the surface structure of the TiO2 polymorphs rutile and anatase10.1039/a606353e ↗
56. Surface structures and thermodynamics of low-index of rutile, brookite and anatase – A comparative DFT study10.1016/j.apsusc.2013.10.021 ↗
57. Hardness of nanocrystalline TiO2 thin films10.4028/www.scientific.net/JNanoR.18-19.195 ↗