journal article·2012-02

The fabrication of front electrodes of Si solar cell by dispensing printing

Do-Hyung Kim, Sung-Soo Ryu, Dongwook Shin, Jung-Han Shin, Jwa-Jin Jeong, Hyeong-Jun Kim, Hyo Sik Chang

Publisher page

Abstract

Abstract The dispensing printing was applied to fabricate the front electrodes of silicon solar cell. In this method, a micro channel nozzle and normal Ag paste were employed. The aspect ratio and line width of electrodes could be controlled by the process variables such as the inner diameter of nozzle, dispensing speed, discharge pressure, and the gap between wafer and nozzle. For the nozzle with the inner diameter of 50 μm, the line width and aspect ratio of electrode were under 90 μm and more than ∼0.2, respectively. When comparing the efficiency of solar cell prepared by conventional screen printing and the dispensing printing, the latter exhibited 19.1%, which is 0.8% absolute higher than the former even with the same Ag paste. This is because the electrode by dispensing printing has uniform aspect ratio and narrow line width over the length of electrode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Kazmerski · Electron Spectroscopy and Related Phenomena · 2006 · 150 · 10510.1016/j.elspec.2005.09.004 ↗
2. Chang · Solar Energy Materials & Solar Cells · 2010 · 95 · 6310.1016/j.solmat.2010.05.018 ↗
3. Yamaguchi · Solar Energy · 2006 · 80 · 10410.1016/j.solener.2005.02.013 ↗
4. Willeke · Solar Energy Materials & Solar Cells · 2002 · 72 · 19110.1016/S0927-0248(01)00164-7 ↗
5. T.H. Lee, Next generation technology of module plastic package material, Ministry of knowledge Economy, Republic of Korea, 2005. Available online. http://110.14.182.18/mct/MessageBoard/ArticleFile.do?id=111106.
6. Front contact pastes with increased aspect ratio to achieve higher efficiency on screen printed solar cells
7. Hot melt ink for the front side metallization of silicon solar cells
8. S.H. Han, Plasma Display Panel, U.S. Patent 2010/0109526 A1 (2010).10.1109/PLASMA.2010.5534008 ↗
9. T. Yoneda, S. Ishida, H. Mishina, Paste applicator, US Patent 5,415,693 (1995).
10. Cho · Review of Advanced Materials Science · 2011 · 28 · 175
11. Ham · Journal of the Korean Physical Society · 2010 · 57 · 87710.3938/jkps.57.877 ↗
12. Saedan · International Journal of Automation Technology · 2011 · 5 · 63410.20965/ijat.2011.p0634 ↗
13. Mutsuddy · 1995
14. Sutera · Annual Review of Fluid Mechanics · 1993 · 25 · 110.1146/annurev.fl.25.010193.000245 ↗
15. Viscosity
16. Papanastasiou · 2000
17. Hot-melt screen printing of front contacts on crystalline silicon solar cell