journal article·2012-11

Hot compressive deformation behavior of the as-quenched A357 aluminum alloy

X.W. Yang, Z.H. Lai, J.C. Zhu, Y. Liu, D. He

Materials Science and Engineering: B· Volume 177· Issue 19
Publisher page

Abstract

Abstract The objective of the present work was to establish an accurate thermal-stress mathematical model of the quenching operation for A357 (Al–7Si–0.6Mg) alloy and to investigate the deformation behavior of this alloy. Isothermal compression tests of as-quenched A357 alloy were performed in the temperature range of 350–500 °C and at the strain rate range of 0.001–1 s −1 . Experimental results show that the flow stress of as-quenched A357 alloy decreases with the increase of temperature and the decrease of strain rate. Based on the hyperbolic sine equation, a constitutive equation is a relation between 0.2 pct yield stress and deformation conditions (strain rate and deformation temperature) was established. The corresponding hot deformation activation energy ( Q ) for as-quenched A357 alloy is 252.095 kJ/mol. Under the different small strains (≤0.01), the constitutive equation parameters of as-quenched A357 alloy were calculated. Values of flow stress calculated by constitutive equation were in a very good agreement with experimental results. Therefore, it can be used as an accurate thermal-stress model to solve the problems of quench distortion of parts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Alexopoulos · Mater. Des. · 2004 · 25 · 41910.1016/j.matdes.2003.11.007 ↗
2. Es-Said · Eng. Fail. Anal. · 2002 · 9 · 9910.1016/S1350-6307(00)00034-0 ↗
3. Kumar · J. Mater. Process. Technol. · 2007 · 182 · 15210.1016/j.jmatprotec.2006.07.024 ↗
4. Callister · 1994
5. Srinivasan · Metall. Trans. A · 1993 · 24A · 206110.1007/BF02666340 ↗
6. Li · Mater. Des. · 2002 · 23 · 45110.1016/S0261-3069(02)00025-0 ↗
7. Mirzadeh · Mater. Sci. Eng. A · 2010 · 527 · 116010.1016/j.msea.2009.09.060 ↗
8. Niu · Mater. Sci. Eng. A · 2008 · 492 · 2410.1016/j.msea.2008.02.036 ↗
9. Davenport · Mater. Sci. Technol. · 2000 · 16 · 53910.1179/026708300101508045 ↗
10. Wanjara · Mater. Sci. Eng. A · 2005 · 396 · 5010.1016/j.msea.2004.12.005 ↗
11. Ahmad · J. Mater. Process. Technol. · 2007 · 186 · 33910.1016/j.jmatprotec.2006.11.228 ↗
12. Kapoor · J. Mater. Process. Technol. · 2005 · 169 · 19910.1016/j.jmatprotec.2005.03.022 ↗
13. Estey · Mater. Sci. Eng. A · 2004 · 383 · 24510.1016/j.msea.2004.06.004 ↗
14. Kaibyshev · Mater. Sci. Eng. A · 2002 · 334 · 10410.1016/S0921-5093(01)01777-4 ↗
15. Mahmudi · Mater. Sci. Eng. A · 2004 · 382 · 1510.1016/j.msea.2004.05.078 ↗
16. Shi · Mater. Sci. Eng. A · 1997 · 13 · 210