journal article·2003-05

Study of factors influencing the microstructure and phase content of ultrafine Y-TZP

Jie Li, Zilong Tang, Zhongtai Zhang, Shaohua Luo

Materials Science and Engineering: B· Volume 99· Issue 1-3
Publisher page

Abstract

Abstract 2∼3.5 mol%Y 2 O 3 stabilized zirconia powders were prepared by mixing pure zirconia and Y(NO 3 ) 3 solution. The sintering ability of these powders was investigated. The results show that with the increasing amount of yttria, the grain size decreases while the density and the (t+c)-ZrO 2 phase fraction increase. It is not sufficient in stabilizing all the zirconia when the doped yttria is less than 2.5 mol%. Several experimental rules about the microstructure and phase content developing with sintering temperature and soaking time are presented. The critical grain size for the retention of high-temperature tetragonal phase in 3Y-TZP is about 0.5 μm. A 3Y-TZP sample with grain size about 0.3 μm, relative density higher than 99%, (t+c)-ZrO 2 phase fraction more than 90%, was obtained when it was sintered at 1450 °C for 2 h in air.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advancements in Solid Oxide Fuel Cells · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Swain · J. Am. Ceram. Soc. · 1986 · 69 · 51110.1111/j.1151-2916.1986.tb04785.x ↗
2. Yazawa · 1989 · 387
3. Betz · Mater. Sci. Eng. · 2000 · A281 · 6810.1016/S0921-5093(99)00736-4 ↗
4. William · 1994 · 67
5. Garvie · J. Am. Ceram. Soc. · 1972 · 55 · 30310.1111/j.1151-2916.1972.tb11290.x ↗
6. Mingxia · Chin. Ceram. Soc. · 1997 · 4 · 40
7. Joliet · J. de Physique · 1986 · 47 · 72310.1051/jphys:01986004705072300 ↗
8. Das · J. Europ. Ceram. Soc. · 1998 · 18 · 177110.1016/S0955-2219(98)00095-8 ↗