journal article·2010-12

Properties of MnZn ferrites prepared by powder injection molding technology

B.S. Zlatkov, N.S. Mitrović, M.V. Nikolić, A.M. Maričić, H. Danninger, O.S. Aleksić, E. Halwax

Publisher page

Abstract

Abstract In this work, manganese zinc ferrite components were manufactured by powder injection molding—PIM technology. A fine powder consisting of Mn 1− x Zn x Fe 2 O 4 with small addition of hematite α-Fe 2 O 3 as used in mass ferrite production was mixed with an organic binder (Solvent System) to form ferrite feedstock for powder injection molding—PIM technology. Excess of Fe 2 O 3 was present in the starting powder in order to suppress conversion of Fe 3+ to Fe 2+ ions which would lower the permeability. The ferrite feedstock was injected in a mold with a cavity shaped like a small cylinder with a hole on the main axis. Injection molded samples were then solvent and thermally debinded and sintered in different atmospheres: air, argon and nitrogen. The starting powder, injected green samples and sintered samples were characterized using X-ray diffractometry, scanning electron microscopy, thermogravimetry, differential thermal analysis as well as by magnetic measurements. Rietveld refinement of measured X-ray patterns was done to detect possible phase transformations of Fe 2 O 3 to other iron oxides through reduction by binder residues (carbon) at elevated temperatures during thermal debinding and sintering. Finally, the magnetic properties were measured by hysteresis graph and mutually compared for the injected samples that were sintered in air, argon and nitrogen. The obtained magnetic characteristics where found to be comparable with commercial samples prepared by traditional sintering technology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Aluminum Alloys Composites Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Goldman · 2006
2. O’Handley · 2000
3. Siemens Matsushita Components, Ferrites and Accessories, Data Book, 1999, pp. 11–32.
4. Vogt Electronic, Inductive Components, Ferocarit (Catalogue), 2000, pp. 91/01-22.
5. Yoo · J. Am. Ceram. Soc. · 2005 · 70 · 38810.1111/j.1151-2916.1987.tb05656.x ↗
6. German · 1997
7. Zlatkov · J. Magn. Magn. Mater. · 2009 · 321 · 33010.1016/j.jmmm.2008.09.014 ↗
8. Zlatkov · PIM Int. · 2009 · 3 · 41
9. Zlatkov · Sci. Sintering · 2008 · 40 · 18510.2298/SOS0802185Z ↗
10. Zlatkov · PIM Int. · 2009 · 3 · 50
11. Zlatkov · PIM Int. · 2009 · 3 · 58
12. Larson · 2004
13. Toby · J. Appl. Crystallogr. · 2001 · 34 · 21010.1107/S0021889801002242 ↗
14. Withop · IEEE Trans. Magn. · 1978 · 14 · 43910.1109/TMAG.1978.1059867 ↗
15. König · J. Appl. Crystallogr. · 1968 · 1 · 12410.1107/S0021889868005145 ↗
16. Yu · J. Geol. Soc. Chin. (Taiwan) · 1999 · 42 · 349
17. Abrahams · Acta Crystallogr. B · 1969 · 25 · 123310.1107/S0567740869003876 ↗
18. Jarosch · Mineral. Petrol. · 1987 · 37 · 1510.1007/BF01163155 ↗
19. Fjellvag · J. Solid State Chem. · 1996 · 124 · 5210.1006/jssc.1996.0206 ↗
20. Brooksbank · Trans. J. Br. Ceram. Soc. · 1984 · 83 · 5
21. Thakur · Ceram. Int. · 2003 · 29 · 50510.1016/S0272-8842(02)00194-3 ↗
22. Yuxiang Magnetic Materials Ind, Co. (Catalogue), 2005, http://www.fdk.com.