journal article·2006-06

Change in grain size and flow strength in P/M Rene 95 under isothermal forging conditions

M. Oktay Alniak, Fevzi Bedir

Materials Science and Engineering: B· Volume 130· Issue 1-3
Publisher page

Abstract

Abstract The changes in microstructure induced by plastic deformation in hot isostatically pressed (HIPed) P/M Rene 95 under isothermal conditions are discussed. Results of the constant true strain rate compression tests are presented for initially fine (7 μm) and coarse (50 μm) grained compacts deformed at temperatures of 1050 °C, 1075 °C and 1100 °C and at strain rates in the range from 10 −4 s −1 to 1 s −1 . Under these test conditions, both the fine and coarse-grained compacts recrystallize and their grain size are refined during flow. This grain refinement gives rise to softening in both materials. Ultimately, their microstructures transform into the same equiaxed fine-grained microduplex structure at which point their flow strength becomes identical. Continued deformation at that point produces no further change in grain size or flow strength. Under this steady state regime of deformation, the microduplex grain size and flow strength are independent of the original microstructure but are conditioned by the strain rate at a given temperature. The steady state grain size increases whereas the steady flow strength decreases with a decrease in strain rate and/or an increase in temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Immarigeon · Can. Aeronautics Space J. · 1981 · 27 · 336
2. M.M. Allen, R.L. Athey, J.B. Moore, Met. Eng. Quart. 10 (1) (1970) 20–30. See also J.B. Moore, R.L. Athey, US Patent No. 3,519,504 (1970).
3. Dreshfield · 1984 · 1
4. Mi · Scripta Mater. · 1998 · 38 · 63710.1016/S1359-6462(97)00515-0 ↗
5. Zhang · J. Mater. Process. Technol. · 1997 · 72 · 26210.1016/S0924-0136(97)00178-7 ↗
6. Immarigeon · Met. Powder Rep. · 1983 · 38 · 537
7. Ng · J. Mater. Process. Technol. · 1997 · 67 · 14310.1016/S0924-0136(96)02834-8 ↗
8. Habel · Met. Powder Rep. · 2000 · 55 · 39
9. Cho · Int. J. Mech. Sci. · 2001 · 43 · 92110.1016/S0020-7403(00)00054-0 ↗
10. Skoglund · Intermetallics · 2004 · 12 · 97710.1016/j.intermet.2004.03.004 ↗
11. Maziasz · Intermetallics · 1997 · 5 · 54710.1016/S0966-9795(97)00033-2 ↗
12. Jeandin · J. Mater. Sci. · 1982 · 17 · 290210.1007/BF00644668 ↗
13. Altan · 1983 · 77
14. J.F. Thomas, Flow based analyses of metal deformation processes, an overview, AGARD Lecture Series, No.LS-137 on Process Modelling Applied to Metal Forming and Thermomechanical Processing, October 1984, Pub.AGARD-NATO, paper No.1, pp. 1-1/1-18.
15. Immarigeon · Test. Eval. · 1980 · 8 · 27310.1520/JTE10625J ↗
16. Somani · Mater. Sc. Eng.: A · 1998 · 245 · 8810.1016/S0921-5093(97)00698-9 ↗
17. M.O. Alniak, Malzemelerin plastik ve süper plastik davranışlarında bünye denklemleri, toz metalürjisi süper alaşımı P/M Rene 95’in sabit dövme sıcaklığında deformasyonu ile mikroyapısal değişikliklerin modellenmesi, Doktora tezi (PhD thesis), Gazi Üni., Fen Bilimleri Enstitüsü, Ankara-Turkey, Haziran, 1990.
18. M.O. Alniak, D.D. Morphy, T. Tereda, A.K. Koul, J-P. Immarigeon, Modelling of deformation and microstructural changes in P/M Rene 95 under isothermal forging conditions, LTR-ST-1637, Laboratory Technical report, National aeronautical establishment, Ottowa, Canada, 1987.
19. Koul · Acta Metall. · 1987 · 35 · 179110.1016/0001-6160(87)90125-8 ↗
20. J-P. Immarigeon, P. Adams, R. Kulchyski, Analog function generator for constant true strain rate during uniaxial compression with an MTS testing machine, NAE-NRC Report LTR-ST-786, Ottawa, Canada, 1975.
21. Zhou · Mater. Sci. Eng.: A · 1998 · 245 · 2910.1016/S0921-5093(97)00707-7 ↗
22. Edington · Prog. Mater. Sci. · 1976 · 21 · 6110.1016/0079-6425(76)90005-0 ↗
23. T.G. Langdon, in: N.E. Paton, C.H. Hamilton (Eds.), Proceedings Symposium on Superplastic Forming of Structural Alloys, TMS AIME, 1982, pp. 27–40.
24. H.J. McQueen, B. Baudelet, in: P. Haasen, G. Kostorz, V. Gerold (Eds.), Proceedings of the 5th ICSMA, Aachen, August 1979, Pergamon Press, 1979, pp. 329–336.10.1016/B978-1-4832-8412-5.50061-8 ↗
25. Padmanabhan · 1980
26. Wanjara · Mater. Sci. Eng.: A · 2005 · 396 · 5010.1016/j.msea.2004.12.005 ↗
27. Immarigeon · Met. Trans. · 1981 · 12A · 117710.1007/BF02642331 ↗
28. J-P. Immarigeon, W. Wallace, GV. Drunen, Proceedings of the 3rd International Symposium, on Superalloys—Metallurgy and Manufacture, Claitor's Publishing Division, Baton Rouge, 1976, pp. 463–472. Also published as NRC, DME/NAE Q. Bull. 1 (1977) 1–12.
29. Kandeil · Met. Sci. · 1980 · 14 · 49310.1179/030634580790426111 ↗
30. Kandeil · High Temp. Technol. · 1983 · 1–4 · 20110.1080/02619180.1983.11753209 ↗
31. Balasubramanian · Mater. Sci. Eng.: A · 2005 · 410–411 · 47610.1016/j.msea.2005.08.090 ↗