Performance evaluation of VARTM manufactured textile composites for the aerospace and defense applications
Source abstract
Abstract
Abstract High specific modulus and high specific strength are the most required characteristics of the materials in the aerospace and defense structural applications. Fibers in textile form exhibit good out-of-plane properties, and good fatigue and impact resistance. Additionally, they have better dimensional stability and conformability. The variety of fabric architectures includes weaves, knits, and braids. Vacuum assisted resin transfer molding (VARTM) is a low-cost closed molding process with the capability of producing complex parts. Before VARTM manufactured textile composites can be confidently used in the primary structures, it is necessary to understand the damage mechanisms under various loadings especially under impact and fatigue. This paper addresses tension–compression fatigue performance of twill woven S2 glass/vinyl ester and plain-woven S2 glass/epoxy thick composites for composite armored vehicle (CAV) applications. The stitch-bonded E glass/vinyl ester and woven roving E glass/vinyl ester composites were investigated for naval applications under low velocity impact loadings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. J.D. Whitcomb, X. Tang, Effect of tow architecture on stresses in woven composites, 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Collection of Technical Papers, vol. 3, 1999-1479 (A99-24601 05-39).10.2514/6.1999-1479 ↗
2. V. Krishnan, A. Kelkar, K. Shivakumar, Comparative study of woven-roving and stitch-bonded composites under low velocity impact loads, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, California, April 19–22, 2004 (AIAA 2004-1930).10.2514/6.2004-1930 ↗
3. A.D. Kelkar, J.S. Tate, Int. J. Manuf. Technol. Res. 1 (2004), http://www.bitmesra.ac.in/jmtr/firstvolume.htm.
4. A.D. Kelkar, S. Shenoy, X. Tang, Behavior of plain woven textile composites subjected to uniaxial tensile loading, 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Seattle, WA, April 16–19, 2001.10.2514/6.2001-1510 ↗
5. P. Chaphalkar, A.D. Kelkar, Semi-analytical modeling of progressive damage in Twill woven textile composites, Recent Advances in Solids and Structures, PVP-vol. 432, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, New York, November 11–16, 2001.10.1115/IMECE2001/PVP-25212 ↗
6. X. Tang, J.D. Whitcomb, A.D. Kelkar, Micromechanics analysis of nonlinear behavior in woven composites, Proceedings of the 16th Annual Technical Conference, American Society for Composites, Blacksburg, VA, September 9–12, 2001.