journal article·2004-07

Extended phase homogeneity and electrical properties of barium calcium titanate prepared by the wet chemical methods

S Jayanthi, T.R.N Kutty

Publisher page

Abstract

Abstract Ca-substituted BaTiO 3 with extended homogeneity range upto ∼50 mol% CaTiO 3 have been prepared by three different chemical routes namely carbonate-oxalate (COBCT), gel-carbonate (GCBCT), and gel-to-crystallite conversion (GHBCT) followed by heat treatment above 1150 °C. X-ray powder diffraction (XRD) data show continuous decrease in the tetragonal unit cell parameters as well as c 0 / a 0 ratio with CaTiO 3 content, which are in accordance with the substitution of smaller sized Ca 2+ ions at the barium sites. The microstructure as well as the dielectric properties are greatly influenced by the cationic ratio, α =(Ba+Ca)/Ti. The grain size decreases with CaTiO 3 content for the stoichiometric samples ( α =1), whereas ultrafine microstructure is observed in the case of off-stoichiometric samples ( α >1) for the whole compositional range of CaTiO 3 concentrations. Sharper e r – T characteristics at lower calcium content and broader e r – T with decreased e max , in the higher calcium range are observed in the case of α =1. Whereas nanometer grained ceramics exhibiting diffuse e r – T characteristics are obtained in the case of α >1. The positive temperature coefficient of resistivity (PTCR) is realized for barium calcium titanate ceramics having 0.3 at.% Sb as the donor dopant for higher CaTiO 3 (typically 30 mol%) containing samples ( α =1), indicating that Ca 2+ ions do not behave as acceptors if they were to substitute at the Ti 4+ sites. Whereas the off-stoichiometric ( α >1) ceramics retained high resistivity, indicative of the Ti-site occupancy for Ca 2+ in fine grain ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric properties of ceramics · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A.J. Moulson, J.M. Herbert, Electro-ceramic materials, Properties and Applications, Chapman and Hall, London, NY, 1990.
2. Jonker · Philip. Tech. Rev. · 1955 · 17 · 129
3. V.F. Capozzi, Multilayers Ceramic Capacitor Materials and Manufacture, Oxy Metal Industries Co., NY, 1975, p. 33.
4. Devries · J. Am. Ceram. Soc. · 1955 · 38 · 14210.1111/j.1151-2916.1955.tb14918.x ↗
5. Berlincourt · J. Acoust. Soc. Am. · 1952 · 24 · 70910.1121/1.1906961 ↗
6. McQuarrie · J. Am. Ceram. Soc. · 1954 · 37 · 53910.1111/j.1151-2916.1954.tb13986.x ↗
7. Mitsui · Phys. Rev. · 1961 · 124 · 135410.1103/PhysRev.124.1354 ↗
8. Zhuang · Mater. Res. Bull. · 1981 · 22 · 132910.1016/0025-5408(87)90296-0 ↗
9. B. Jaffe, J. Cook, W.R., H. Jaffe, Piezoelectric Ceramic, Academic Press, London, 1971.
10. Kutty · Mater. Chem. Phys. · 1995 · 39 · 20010.1016/0254-0584(94)01430-O ↗
11. Shannon · Acta Cryst. · 1969 · B25 · 92510.1107/S0567740869003220 ↗
12. M.E. Lines, A.M. Glass, Principles and Applications of ferroelectrics and related Materials, Clarendon Press, Oxford, 1979.
13. B. Jaffe, J. Cook, W.R., H. Jaffe, Piezoelectric Ceramics, Academic Press, New York, 1971, p. 74.
14. Voltzke · J. Euro. Ceram. Soc. · 2000 · 20 · 166310.1016/S0955-2219(00)00061-3 ↗
15. Padmini · J. Mater. Sci.: Mater. Electronics · 1994 · 5 · 20310.1007/BF00186186 ↗
16. Tiwari · J. Phys. D · 1989 · 22 · 83710.1088/0022-3727/22/6/022 ↗
17. Lin · J. Mater. Sci. · 1991 · 26 · 49110.1007/BF00576548 ↗
18. Han · J. Am. Ceram. Soc. · 1987 · 70 · 9610.1111/j.1151-2916.1987.tb04936.x ↗
19. Y.H. Han, M.P. Harmer, Y.H. Hu, D. M. Smyth, Transport in Non-Stoichiometric Compounds, Plenum Publishing Corporation, 1985, pp. 73.10.1007/978-1-4613-2519-2_7 ↗