Formation and mechanical properties of bulk amorphous FC20 (Fe–C–Si) cast iron with small addition of B
Source abstract
Abstract
Abstract By the addition of a small amount (1.5 at.%) of B to a commercial FC20 alloy, an amorphous phase was formed in a melt-spun ribbon as well as in a cast rod of 0.5 mm in diameter. The melt-spun B-free FC20 alloy is composed of α-Fe, γ-Fe and Fe3C. The additional B has great effect on the increase in the glass-forming ability (GFA). The melt-spun amorphous alloy exhibits a high tensile strength (σf) of 3480 MPa. The crystallization takes place by the process; amorphous (Am)→Am′+α-Fe→Am″+α-Fe+Fe3C→α-Fe+Fe3C→α-Fe+Fe3C+graphite. The structure after annealing for 900 s at 1200 K has fine grain sizes of about 0.5 μm for α-Fe, 0.3 μm for Fe3C and 1 μm for graphite. The graphite-containing alloy ribbon exhibits high σf of 1200–2000 MPa and large elongation ef of 5–13% which exceed largely those (200–300 MPa and ∼0%) for FC20 cast iron. The cast alloy rod of 0.5 mm in diameter annealed for 3.6 ks at 1200 K exhibits high σf 1530 MPa and large ef of 9%. The good mechanical properties are presumably due to the combination of subdivision of crack initiation sites caused by the homogeneous dispersion of fine graphite particles and the dispersion strengthening of fine Fe3C particles. The synthesis of the bulk alloy rods having good mechanical properties by crystallization of the new amorphous alloy is promising for the future development of the FC20 type alloy as a new type of high-strength and high-ductility material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Inoue · Jpn. J. Appl. Phys. · 1988 · 27 · L224810.1143/JJAP.27.L2248 ↗
2. Inoue · Mater. Trans. JIM · 1989 · 30 · 96510.2320/matertrans1989.30.965 ↗
3. Inoue · Mater. Trans. JIM · 1990 · 31 · 17710.2320/matertrans1989.31.177 ↗
4. Peker · Appl. Phys. Lett. · 1993 · 63 · 234210.1063/1.110520 ↗
5. Inoue · Mater. Trans. JIM · 1995 · 36 · 142710.2320/matertrans1989.36.1427 ↗
6. Inoue · Appl. Phys. Lett. · 1997 · 71 · 46410.1063/1.119580 ↗
7. Zhang · Mater. Trans. JIM · 1998 · 39 · 85710.2320/matertrans1989.39.857 ↗
8. Metals Databook, Japan Institute of Metals, Maruzen, Tokyo, 1983, pp. 139–140.
9. T. Masumoto (Ed.), Materials Science of Amorphous Alloys, Ohmu, Tokyo, 1982, pp. 281–290.
10. Shingu · Suppl. Sci. Rep. Res. Inst. Tohoku Univ. · 1980 · 15 · 85
11. Inoue · J. Mater. Sci. · 1984 · 19 · 412510.1007/BF00980780 ↗
12. T. Sato (Ed.), Optical Micrographs and Explanation of Iron and Steels, Maruzen, Tokyo, 1968, pp. 230–240.