journal article·2000-04

Deformation behavior of model MMC scarf joints

D.D Brink, J.C Mailand, C.G Levi, F.A Leckie

Materials Science and Engineering: A· Volume 281· Issue 1-2
Publisher page

Abstract

Abstract The mechanical response of metal interlayers constrained between two fiber-reinforced MMC (metal–matrix composites) sub-elements was investigated. The fibers were polycrystalline Al2O3, discontinuous at the joint, embedded in Al–4.5Mg, that was continuous through the joint and constituted both the composite matrix and the interlayer material. The specimens were produced by pressurized melt infiltration and comprised interlayers oriented from 0 to 75° relative to the plane normal to the fiber axis. Analytical and finite element models were developed and compared with experimental results in order to elucidate the deformation behavior of these interlayers and to identify the key factors controlling joint performance. Two predominant regimes were identified in this manner. Joints in the intermediate angle range (45±15°) exhibit limit load behavior and develop large strains prior to failure, whereas joints at lower (≤15°) and higher (75°) angles show only modest plasticity. The models suggest that the latter group could, in principle, develop large strains and limit loads, but this behavior is precluded by the intervention of failure owing to debonding in the lower angle joints, and to composite fracture in the highest angle ones. The analysis further reveals that the constitutive behavior of the metal in the interlayer exhibits substantial hardening relative to that of the monolithic matrix processed in the same manner. The reasons for this behavior are discussed. The models set the stage for future work to elucidating failure criteria for interlayers in these joint configurations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Burr · Acta Metall. Mater. · 1995 · 43 · 336110.1016/0956-7151(95)00045-W ↗
2. Brink · Acta Mater. · 1997 · 45 · 276510.1016/S1359-6454(96)00393-X ↗
3. Brink · 1998 · 441
4. Hill · 1950 · 228
5. D.D. Brink, C.G. Levi, F.A. Leckie, in press.
6. W. Ramberg, W.R. Osgood, Technical Notes National Advisory Committee for Aeronautics No. 902, NACA, 1943, Washington, D.C.
7. Courtney · 1990 · 171
8. Clyne · 1993 · 84
9. Suresh · 1993 · 124
10. D.D. Brink, S.A. Waltner, J.Y. Yang, C.G. Levi, F.A. Leckie, Mater. Sci. Eng. (2000) in press.
11. Tabor · J. Inst. Metals · 1951 · 79 · 1
12. Metals Handbook, Technical Eds., S.R. Lampman, T.B. Zorc, 10th ed., ASM International, 2 (1990) pp. 89-100.
13. 1989 Annual Book of ASTM Standards, Managing Ed., R.A. Storer, Volume 03.01, ASTM, Easton, MD, 1989, pp. 338.
14. Chang · J. Mater. Sci. · 1976 · 11 · 62310.1007/BF01209447 ↗