Deformation behavior of β1 phase in polycrystalline CuAlMnZnZr shape memory alloy with wide transformation hysteresis
Source abstract
Abstract
Abstract The stress-induced martensite transformation in Cu–18.4Al–8.7Mn–3.4Zn–0.1Zr alloy (at%) has been studied by means of tensile test, electrical resistivity curve measurement, in situ metallographical observation, X-ray diffraction and TEM observation. By applying stress to the uniform β 1 matrix, two or more groups of differently oriented martensitic variants are stress-induced inside one grain. With further increase of stress, they coalesce into a single oriented variant martensitic phase or form complicated cross-like configuration. The elongation and the ultimate tensile strength of the tested CuAlMnZnZr alloy as-quenched in the ordered β 1 phase are 11% and 550 MPa, respectively. For the alloy, there is a characteristic deformation temperature (between M s + 10 °C and M s + 60 °C) and a strain range (between 6.5 and 9.0%). In this case, deformation can effectively increase the transformation hysteresis (more than 90 °C), while the strain recovery ratio remains practical high (more than 3.7%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Melton · 1986 · 1054
2. K. Otsuka, SMM’94, Beijing, 1994, pp.129–136.10.1542/peds.94.1.136 ↗
3. Piao · Mater. Trans. JIM · 1993 · 34 · 91910.2320/matertrans1989.34.919 ↗
4. Zhao · Acta Metall. Sin. · 1997 · 33 · 90
5. Zhang · Scripta Metall. · 1990 · 24 · 180710.1016/0956-716X(90)90550-Z ↗
6. Cingolani · Mater. Trans. A · 1999 · 30A · 49310.1007/s11661-999-0041-9 ↗
7. Tadaki · Trans. JIM · 1987 · 28 · 12010.2320/matertrans1960.28.120 ↗
8. Sakamoto · Trans. JIM · 1985 · 26 · 63810.2320/matertrans1960.26.638 ↗
9. Adachi · Metall. Trans. · 1986 · 17A · 94510.1007/BF02661260 ↗
10. Garcir · Scripta Metall. · 2000 · 42 · 53110.1016/S1359-6462(99)00397-8 ↗
11. Li · Trans. Nonferrous Met. Soc. China · 2002 · 12 · 6
12. Nadaki · Trans. JIM · 1993 · 34 · 42910.2320/matertrans1989.34.429 ↗
13. Li · Trans. Nonferrous Met. Soc. China · 2002 · 12 · 712
14. Tadaki · Mater. Trans. JIM · 1990 · 31 · 94110.2320/matertrans1989.31.941 ↗
15. Kainuma · Metall. Trans. A · 1996 · 27A · 218710.1007/BF02651873 ↗
16. Chung · Mater. Sci. Eng. A · 1999 · A273–275 · 62210.1016/S0921-5093(99)00335-4 ↗
17. Z.C. Lin, SMAT-97, Monterey, CA, USA, 1997, pp.107–115.
18. Tang · J. Mater. Process. Technol. · 1997 · 63 · 30710.1016/S0924-0136(96)02641-6 ↗
19. Sakamoto · Trans. JIM · 1984 · 25 · 84510.2320/matertrans1960.25.845 ↗
20. Sakamoto · Trans. JIM · 1985 · 26 · 63810.2320/matertrans1960.26.638 ↗
21. Takei · Scripta Metall. · 1983 · 17 · 98710.1016/0036-9748(83)90436-2 ↗