Effect of temperature and loading sense on deformation-induced phase transformation in a high Sn content zirconium alloy
Source abstract
Abstract
Abstract The activation of a phase transformation during plastic deformation of the zirconium alloy, Excel (Zr-3.5Sn-0.8Mo-0.8Nb), has been investigated using a combination of in situ neutron diffraction and electron microscopy. The effect of temperature and tension/compression asymmetry on the activation of the phase transformation is identified. While the phase transformation is readily activated in tension at room temperature and 100 °C, a significant drop in the transformation rate was observed at 200 °C. This temperature dependence appears to be independent of loading direction relative to material texture and depends on the specific crystallography and thermodynamics of the β → α transformation in zirconium. Loading in compression did not result in the activation of the phase transformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Development of high strength zirconium alloys10.1179/cmq.1972.11.1.257 ↗
2. Effect of Nb additions on the microstructure, thermal stability and mechanical behavior of high pressure Zr phases under ambient conditions10.1016/j.msea.2011.01.062 ↗
3. Effects of Mo addition on precipitation in Zr-1.2Nb alloys10.1016/j.matlet.2015.05.144 ↗
4. Intergranular stresses in Zircaloy-2 with rod texture10.1016/S1359-6454(98)00385-1 ↗
5. Texture development and anisotropic deformation of zircaloys10.1016/j.pnucene.2005.09.011 ↗
6. Effects of texture, temperature and strain on the deformation modes of zirconium10.1080/14786430600684500 ↗
7. Modeling lattice strain evolution during uniaxial deformation of textured Zircaloy-210.1016/j.actamat.2008.04.019 ↗
8. Elastic and plastic properties of β Zr at room temperature10.1016/j.jnucmat.2009.05.007 ↗
9. Presence and absence of significant twinning: effects on cold deformed microstructures of single phase Zircaloy 210.1016/j.msea.2009.05.025 ↗
10. Retention of metastable β phase in a two-phase quaternary zirconium alloy10.1016/j.matdes.2018.07.021 ↗
11. Evidence for deformation-induced phase transformation in a high Sn content zirconium alloy10.1016/j.actamat.2018.09.034 ↗
12. Stress-assisted isothermal martensitic transformation: application to TRIP steels10.1007/BF02645934 ↗
13. The theoretical bases of the development of the high-strength metastable beta-alloys of titanium
14. Influence of prior dislocation structure on anisotropy of thermal creep of cold-worked Zr-2.5Nb tubes10.1016/j.jnucmat.2011.02.044 ↗
15. On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects10.1016/j.scriptamat.2012.01.049 ↗
16. Experiment and modeling to investigate the effect of stress state, strain and temperature on martensitic phase transformation in TRIP-assisted steel10.1016/j.actamat.2015.06.023 ↗
17. Deformation-induced martensitic transformation in a new metastable β titanium alloy10.1016/j.jallcom.2015.07.263 ↗
18. Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy10.1016/j.actamat.2015.11.026 ↗
19. The effect of oxygen and stress state on the yield behavior of commercially pure titanium10.1016/j.msea.2012.04.058 ↗
20. Effects of texture and anisotropy on intergranular stress development in zirconium10.4028/www.scientific.net/MSF.495-497.1553 ↗
21. Texture strengthening and strength differential in titanium-6Al-4V10.1007/BF02658401 ↗
22. Deformation-induced transformations in metastable β zirconium-based alloys
23. The strain induced martensitic transformation in zirconium/3 wt% molybdenum/1 wt% aluminum10.1016/0022-3115(71)90036-5 ↗
24. First in situ lattice strains measurements under load at VULCAN10.1007/s11661-010-0495-9 ↗
25. Temperature dependence of the activity of deformation modes in an HCP zirconium alloy10.1007/s11661-013-1758-z ↗
26. Internal stresses in deformed crystalline aggregates10.2138/rmg.2006.63.16 ↗
27. E. Tenckhoff, Review of deformation mechanisms, texture, and mechanical anisotropy in zirconium and zirconium base alloys, in: Proceedings of the Zirconium in the Nuclear Industry: Fourteenth International Symposium, Vol. 2, ASTM International, West Conshohocken, PA, 2005, pp. 25–25–26. 〈http://dx.doi.org/10.1520/STP37501S〉.10.1520/STP37501S ↗
28. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
29. Texture inheritance and variant selection through an hcp-bcc-hcp phase transformation10.1016/j.actamat.2010.03.012 ↗
30. Texture analysis with MTEX – free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
31. Plate-shaped transformation products in zirconium-base alloys10.1007/s11661-997-0178-3 ↗
32. Defect-related physical-profile-based X-ray and neutron line profile analysis10.1007/s11661-009-9961-7 ↗
33. The concern of elasticity in stress-induced martensitic transformation in NiTi10.1016/S0921-5093(98)00959-9 ↗
34. Criterion for the action of applied stress in the martensitic transformation10.1016/0001-6160(53)90083-2 ↗
35. Development of internal strains in textured Zircaloy-2 during uni-axial deformation10.1016/j.msea.2007.11.018 ↗
36. Evolution of interphase and intergranular stresses in Zr-2.5Nb during room temperature deformation10.1016/j.msea.2008.10.016 ↗
37. 2005
38. Elastic constants in Nb-Zr alloys from zero temperature to the melting point: experiment and theory10.1103/PhysRevB.18.4120 ↗
39. Thermophysical properties of solid phase zirconium at high temperatures10.1007/s10765-006-0080-z ↗