journal article·2018-12

Shear band and α′-martensite induced by stress in laser melting carbide-free bainite layer

Xiaolei Xing, Yefei Zhou, Hui Yu, Ligang Liu, Lijie Zhang, Qingxiang Yang

Publisher page

Abstract

Abstract By means of laser melting and following isothermal transformation (LMFIT), the shear band and α′-martensite in mid-carbon alloy steel layer induced by stress were analyzed. The residual stress, microstructures and nanohardness were analyzed by X-ray stress analyser, X-ray diffraction (XRD), transmission electron microscopy (TEM) and nanoindentation. The results indicate that the carbide-free baninte layers with high hardness are formed on the surface of mid-carbon and high-carbon alloy steels. By LMFIT, the hardness of mid-carbon alloy steel layer can be increased by the carbon supersaturation in bainite ferrite (BF). Meanwhile, shear band and α′-martensite can be induced by thermal stress in mid-carbon alloy steel layer to further improve the hardness. The gradient change of residual stress in the bainite layer leads to that of the nanohardness in bainite layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Very strong bainite10.1016/j.cossms.2004.09.005 ↗
2. Elastic–plastic characterization of a high strength bainite roller bearing steel—experiments and modelling10.1016/j.ijmecsci.2010.06.001 ↗
3. Atomic scale observations of bainite transformation in a high carbon high silicon steel10.1016/j.actamat.2006.08.033 ↗
4. Carbon supersaturation of ferrite in a nanocrystalline bainite steel10.1016/j.actamat.2009.12.020 ↗
5. Examination of carbon partitioning into austenite during tempering of bainite10.1016/j.scriptamat.2010.04.049 ↗
6. Bhadeshia · 2001
7. Evaluation of defect density, microstructure, residual stress, elastic modulus, hardness and strength of laser-deposited AISI 4340 steel10.1016/j.actamat.2014.09.028 ↗
8. Modeling temperature and residual stress fields in selective laser melting10.1016/j.ijmecsci.2017.12.001 ↗
9. Numerical simulation and experimental investigation on the residual stresses in a laser beam welded dual phase DP600 steel plate: thermo-mechanical material plasticity model10.1016/j.ijmecsci.2017.01.006 ↗
10. A comparative study of the wear behaviour of sintered and laser surface melted AISI M42 high speed steel diluted with iron10.1016/j.wear.2005.06.006 ↗
11. Very strong low temperature bainite10.1179/026708301225000725 ↗
12. Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction10.1016/j.scriptamat.2004.03.011 ↗
13. Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer10.1016/j.actamat.2014.12.057 ↗
14. Hardness and elastic modulus gradients in plasma-nitrided 316L polycrystalline stainless steel investigated by nanoindentation tomography10.1016/j.actamat.2011.12.012 ↗
15. Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability10.1016/j.actamat.2011.04.011 ↗
16. Transition of solidification mode and the as-cast γ grain structure in hyperperitectic carbon steels10.1016/j.actamat.2012.01.056 ↗
17. Effect of deformation and annealing on the formation and reversion of ε-martensite in an Fe-Mn-C alloy10.1016/j.actamat.2010.01.045 ↗
18. Investigation on the nucleation mechanism of deformation-induced martensite in an austenitic stainless steel under severe plastic deformation10.1557/jmr.2007.0094 ↗
19. Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation10.1016/j.cossms.2004.09.003 ↗
20. A model for deformation behavior and mechanically induced martensitic transformation of metastable austenitic steel10.1016/j.actamat.2004.07.031 ↗
21. Kinetics of strain-induced martensitic nucleation10.1007/BF02672301 ↗
22. Stress-assisted isothermal martensitic transformation: application to TRIP steels10.1007/BF02645934 ↗
23. The influence of strain rate on the microstructure transition of 304 stainless steel10.1016/j.actamat.2011.03.005 ↗
24. A model for transformation plasticity during bainite transformation of steel under external stress10.1016/S1359-6454(03)00333-1 ↗
25. Grain orientation dependence of microstructures in a warm rolled IF steel10.1016/j.actamat.2004.08.004 ↗