journal article·2018-08Open access

Strength of tantalum shocked at ultrahigh pressures

Aaron P. Stebner, Christopher E. Wehrenberg, Bo Li, Greg C. Randall, Kristen K. John, Grant A. Hudish, Brian R. Maddox, Michael Farrell, Hye-Sook Park, Bruce A. Remington, Michael Ortiz, G. Ravichandran

Abstract

High purity polycrystalline tantalum (Ta) was shocked through 1 to 3.5 Mbar pressures creating Richtmyer-Meshkov unstable interfaces that were used to determine the dynamic material strength. The experiments were performed on the Omega laser at the University of Rochester Laboratory for Laser Energetics. Prior to shock, the driven surfaces of the tantalum targets where coined with a sinusoidal pattern. The targets were recovered post-shock, and the growth of the sinusoid amplitudes was used to characterize the relative extent of plastic deformation as a function of laser energy. Analogous data were extracted prior to the experiments from phenomenological Von Mises plasticity simulations that considered equation of state tables for Ta. The simulations showed the best agreement with the experiments (less than 5% difference between mean ripple growth measures) for shock pressures ranging from 1.2 to 2.7 Mbar. A fluid model studied as a function of viscosity was also used to qualitatively indicate the sensitivity of the experiments to strength. These results verify the ability to use a phenomenological, equation of state based model to simulate very high-strain rate, high-pressure deformation of tantalum.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-pressure geophysics and materials · Laser-Plasma Interactions and Diagnostics · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Strength of shock-loaded single-crystal tantalum [100] determined using in situ broadband X-ray Laue diffraction10.1103/PhysRevLett.110.115501 ↗
2. Laser compression of monocrystalline tantalum10.1016/j.actamat.2012.08.026 ↗
3. Isentropic/shock compression and recovery methodology for materials using high-amplitude laser pulses10.1016/j.msea.2013.04.050 ↗
4. High-pressure, laser-driven deformation of an aluminum alloy10.1007/s11661-004-0208-3 ↗
5. H.-.S. Park, et al., Shock compression of condensed matter, in: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, AIP Publishing, 2011, pp. 1371–1374.
6. Viscous Rayleigh-Taylor instability experiments at high pressure and strain rate10.1103/PhysRevLett.104.135504 ↗
7. Strong stabilization of the Rayleigh-Taylor instability by material strength at megabar pressures10.1063/1.3363170 ↗
8. Grain-size-independent plastic flow at ultrahigh pressures and strain rates10.1103/PhysRevLett.114.065502 ↗
9. Materials science under extreme conditions of pressure and strain rate10.1007/s11661-004-0205-6 ↗
10. Single‐mode and multimode Rayleigh–Taylor experiments on Nova10.1063/1.871096 ↗
11. Developments in microcoining rippled metal foils10.13182/FST63-2-274 ↗
12. HYADES—a plasma hydrodynamics code for dense plasma studies10.1016/0022-4073(94)90078-7 ↗
13. A variational formulation of the coupled thermo-mechanical boundary-value problem for general dissipative solids10.1016/j.jmps.2005.08.010 ↗
14. Optimal transportation meshfree approximation schemes for fluid and plastic flows10.1002/nme.2869 ↗
15. Discrete mechanics and variational integrators10.1017/S096249290100006X ↗
16. Topics in optimal transportation
17. Local maximum-entropy approximation schemes: a seamless bridge between finite elements and meshfree methods10.1002/nme.1534 ↗
18. The variational formulation of viscoplastic constitutive updates10.1016/S0045-7825(98)00219-9 ↗
19. Study and validation of a variational theory of thermo-mechanical coupling in finite visco-plasticity10.1016/j.ijsolstr.2009.11.012 ↗
20. Elastic-plastic deformations at finite strains10.1115/1.3564580 ↗
21. S.D. Crockett, material: SESAME 003720, Los Alamos National Laboratory, Los Alamos, NM, 2004.
22. Thermomechanical characterization of pure polycrystalline tantalum10.1016/j.msea.2006.10.064 ↗
23. Effect of viscosity on Rayleigh-Taylor and Richtmyer-Meshkov instabilities10.1103/PhysRevE.47.375 ↗
24. Shock-induced deformation twinning in tantalum10.1016/S1359-6454(96)00145-0 ↗
25. Shock viscosity and the prediction of shock-wave rise times10.1063/1.336184 ↗
26. Flow strength of tantalum under ramp compression to 250 GPa10.1063/1.4863463 ↗