journal article·2018-01

Impact of the heating rate on the annealing behavior and resulting mechanical properties of UFG HSLA steel

Jörn Niehuesbernd, Enrico Bruder, Clemens Müller

Publisher page

Abstract

Abstract The formability of materials with ultrafine grained (UFG) microstructures produced by severe plastic deformation processes is often limited due to low strain hardening capabilities and strain localizations. Most commonly, heat treatments are used to regain the formability. However, conventional furnace heat treatments can lead to grain growth and significant losses in strength. One approach to address this issue is to increase the heating and cooling rates of the heat treatments. The present work focuses on the heating rate dependencies of the microstructure evolution and resulting mechanical properties of a UFG high strength low alloy (HSLA) steel. Electron backscatter diffraction (EBSD) measurements are used to characterize the microstructure and texture. Bending tests and uniaxial tensile tests are conducted to provide insight into the mechanical properties that are related to the obtained microstructures, with an emphasis on the tendency for strain localizations. The investigations reveal a distinct effect of the heating rate on the annealing behavior, i.e., continuous vs. discontinuous growth. Thus, resulting microstructures and mechanical properties are not only a function of time and temperature but also depend on the heating rate. In this context, the application of laser annealing is shown to be a suitable approach to impede strain localizations in the form of shear bands without sacrificing much of the strength of the UFG material obtained by severe plastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Producing bulk ultrafine-grained materials by severe plastic deformation10.1007/s11837-006-0213-7 ↗
2. Overview of processing, microstructure and mechanical properties of ultrafine grained bcc steels10.1016/j.msea.2006.08.095 ↗
3. Severe plastic deformation (SPD) processes for metals10.1016/j.cirp.2008.09.005 ↗
4. Instabilities and ductility of nanocrystalline and ultrafine-grained metals10.1016/S1359-6462(03)00396-8 ↗
5. Strain hardening, strain rate sensitivity, and ductility of nanostructured metals10.1016/j.msea.2003.10.214 ↗
6. Mechanical behavior of a bulk nanostructured iron alloy10.1007/s11661-998-0104-3 ↗
7. Evolution and microstructure of shear bands in nanostructured Fe10.1063/1.1501158 ↗
8. Grain size dependent shear instabilities in body-centered and face-centered cubic materials10.1016/j.msea.2007.06.094 ↗
9. Basics of linear flow splitting10.1016/j.jmatprotec.2006.10.023 ↗
10. Formation of ultrafine-grained microstructure in HSLA steel profiles by linear flow splitting10.1007/s10853-008-2682-2 ↗
11. Properties of UFG HSLA steel profiles produced by linear flow splitting10.4028/www.scientific.net/MSF.584-586.661 ↗
12. Kaune · 2013
13. E. Bruder, V. Kaune, C. Müller, Integral sheet metal design via severe plastic deformation - state of the art and future challenges, in: Proceedings of IOP Conf. Ser. - Mater. Sci. Eng., 63, 2014, pp. 1–9. 〈http://dx.doi.org/10.1088/1757-899X/63/1/012003〉.10.1088/1757-899X/63/1/012003 ↗
14. Groche · 2017
15. Bruder · 2011
16. Further processing of ultrafine-grain materials10.1007/s12289-010-0899-5 ↗
17. Improving the formability of linear flow split profiles by laser annealing10.1002/mawe.201600577 ↗
18. Three strategies to achieve uniform tensile deformation in a nanostructured metal10.1016/j.actamat.2003.12.022 ↗
19. Humphreys · 2004
20. The effect of deformation texture on the thermal stability of UFG HSLA steel10.1007/s10853-012-6518-8 ↗
21. Annealing treatments to enhance thermal and mechanical stability of ultrafine-grained metals produced by severe plastic deformation10.3139/146.031079 ↗
22. Microstructural changes in equal channel angular pressed low carbon steel by static annealing10.1016/S1359-6454(00)00090-2 ↗
23. high strength and high ductility of ultrafine-grained, interstitial-free steel produced by ECAE and annealing10.1007/s11661-011-1063-7 ↗
24. Annealing behaviour and mechanical properties of severely deformed interstitial free steel10.1016/j.msea.2011.10.007 ↗
25. Growth rates and misorientation relationships between growing nuclei/grains and the surrounding deformed matric during recrystallization10.1016/0956-7151(95)00111-8 ↗
26. On the influence of orientation pinning on growth selection of recrystallization10.1016/S1359-6454(97)00354-6 ↗
27. Recrystallization and texture10.1016/S0079-6425(97)00007-8 ↗