A stress-based fracture criteria validated on mixed microstructures of ferrite and bainite over a range of stress triaxialities
Source abstract
Abstract
Abstract Hot stamping is a sequential process for formation and heat-treatment of sheet metal components with superior mechanical properties. By applying different cooling rates, the microstructural composition and thus the material properties of steel can be designed. By controlling the cooling rate in different sections of a blank, the material properties can be tailored depending on the desired toughness. Under continuous cooling, various volume fractions of ferrite and bainite are formed depending on the rate of cooling. This paper focuses on the ductile fracture behavior of a thin sheet metal made of low-alloyed boron steel with varying amounts of ferrite and bainite. An experimental setup was applied in order to produce microstructures with different volume fractions of ferrite and bainite. In total, five different test specimen geometries, representing different stress triaxialities, were heat treated and tensile tested. Through full-field measurements, flow curves extending beyond necking and the equivalent plastic strain to fracture were determined. Experimental results were further investigated using a mean-field homogenization scheme combined with local fracture criteria. The mean-field homogenization scheme comprises the influence of microstructure composition and stress triaxiality with usable accuracy, connoting auspicious possibilities for constitutive modeling of hot-stamped components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Austenite decomposition during press hardening of a boron steel: computer simulation and test10.1016/j.jmatprotec.2006.02.013 ↗
2. Numerical implementation of a constitutive model for simulation of hot stamping10.1088/0965-0393/15/2/007 ↗
3. Failure model evaluation for varyingmicrostructure base on material hardness
4. A strain rate sensitive constitutive model for quenched boron steel with tailored properties10.1016/j.ijimpeng.2012.06.007 ↗
5. The influence of martensite, bainite and ferrite on the as-quenched constitutive response of simultaneously quenched and deformed boron steel-experiments and model10.1016/j.matdes.2013.10.014 ↗
6. Plasticity and fracture modeling of quench-hardenable boron steel with tailored properties10.1016/j.jmatprotec.2013.12.015 ↗
7. The determination of the elastic field of an ellipsoidal inclusion, and related problems10.1098/rspa.1957.0133 ↗
8. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
9. Double-inclusion model and overall moduli of multi-phase composites10.1016/0167-6636(93)90066-Z ↗
10. G. Lielens, P. Pirotte, A. Couniot, F. Dupret, R. Keunings, Prediction of thermo-mechanical properties for compression moulded composites. Composites Part A: Applied Science and Manufacturing, 29(12), 1998, pp. 63–70. Selected Papers Presented at the Fourth International Conference on Flow Processes in Composite Material. doi.org/10.1016/S1359-835X(97)00039-0.10.1016/S1359-835X(97)00039-0 ↗
11. Homogenization of two-phase elasto-plastic composite materials and structures: study of tangent operators, cyclic plasticity and numerical algorithms10.1016/S0020-7683(03)00013-1 ↗
12. Numerical simulation of ductile fracture based on mean field homogenization method: modeling and implementation
13. Microstructural modeling of ductile fracture initiation in multi-phase materials10.1016/j.engfracmech.2015.04.010 ↗
14. Improvement in lower temperature mechanical properties of 0.40 pct c-ni-cr-mo ultrahigh strength steel with the second phase lower bainite10.1007/BF02644225 ↗
15. Strength of mixtures of bainite and martensite10.1179/mst.1994.10.3.209 ↗
16. Encapsulated zr-based bulk metallic glass with large plasticity10.1016/j.msea.2010.12.077 ↗
17. Plasticity enhancement of a zr-based bulk metallic glass by an electroplated Cu/Ni bilayered coating10.1016/j.msea.2012.05.031 ↗
18. P.W. Bridgman, Studies in Large Plastic Flow and Fracture, 2. rev. ed., McGraw-Hill, New York, 1952. ISBN 90-247-3343-X.
19. On the application of stress triaxiality formula for plane strain fracture testing10.1115/1.3078390 ↗
20. Effect of the triaxiality in plane stress conditions10.48084/etasr.302 ↗
21. Failure of metals i: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
22. Flaw tolerance of metallic glasses10.1016/j.actamat.2016.02.002 ↗
23. Does the fracture toughness of bulk metallic glasses scatter?10.1016/j.scriptamat.2015.05.003 ↗
24. Effect of notch geometry on fracture features10.1016/j.msea.2015.06.044 ↗
25. Calibration and evaluation of seven fracture models10.1016/j.ijmecsci.2005.03.003 ↗
26. A comparative study of three groups of ductile fracture loci in the 3d space10.1016/j.engfracmech.2014.12.023 ↗
27. Temperature and stress state influence on void evolution in a high-strength dual-phase steel10.1016/j.msea.2014.12.053 ↗
28. A finite element ductile failure simulation method using stress-modified fracture strain model10.1016/j.engfracmech.2010.10.004 ↗
29. Modelling of damage and failure in multiphase high strength DP and TRIP steels10.1016/j.engfracmech.2010.08.017 ↗
30. On the prediction of failure in metal sheets with special reference to strain path dependence10.1016/j.ijmecsci.2014.08.006 ↗
31. Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel10.1016/j.msea.2014.02.058 ↗
32. Effect of martensite volume fraction on stress triaxiality and deformation behavior of dual phase steel10.1016/j.matdes.2013.03.096 ↗
33. On the ferrite and bainite transformation in isothermally deformed 22mnb5 steels10.1016/j.msea.2012.04.091 ↗
34. Influence of stress on martensitic transformation and mechanical properties of hot stamped AHSS parts10.1016/j.msea.2015.01.056 ↗
35. Influence of hot plastic deformation and cooling rate on martensite and bainite start temperatures in 22mnb5 steel10.1016/j.msea.2012.01.018 ↗
36. Hot forming of boron steels using heated and cooled tooling for tailored properties10.1016/j.jmatprotec.2012.06.028 ↗
37. E. Meza-Garcia, A. Mosel, Y. Shchus, A. Rautenstrauch, L. Lachmann, F. Schieck, et al., Design of heat treatment processes for a tailored set of properties on 22mnb5 steel alloy sheets simulation and experiments. In: M. Oldenburg, K. Steinhoff, B. Parkash, editors, Hot Sheet Metal Forming of High-Performance Steel, CHS2: 4th International Conference. Verlag Wissenschaftliche Scripten, 2013, pp. 337–344.
38. Characterization of ductile fracture properties of quench-hardenable boron steel: influence of microstructure and processing conditions10.1016/j.msea.2016.01.091 ↗
39. R. Östlund, D. Berglund, M. Oldenburg, Failure analysis of a hat profile with tailored properties subjected to axial compression. In: M. Oldenburg, B. Prakash, K. Steinhoff, editors, Hot Sheet Metal Forming of High Performance Steel, Verlag Wissenschaftliche Scripten, 2013, pp. 23–30.
40. Microstructure based modeling of ductile fracture initiation in press-hardened sheet metal structures10.1016/j.cma.2015.11.035 ↗
41. Experiments and modeling of edge fracture for an AHSS sheet10.1007/s10704-014-9937-5 ↗
42. A study on homogenization methods for steels with varying content of ferrite, bainite and martensite10.1016/j.jmatprotec.2015.07.007 ↗
43. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
44. Characterisation of materials subjected to large strains by inverse modelling based on in-plane displacement fields10.1016/j.ijsolstr.2004.02.021 ↗
45. J. Eman, Study and Characterization of Localization and Failure Behaviour of Ultra High Strength Steel, Licenciate thesis, Luleå University of Technology, 2007.
46. Evaluation of localization and failure of boron alloyed steels with different microstructure compositions10.1016/j.jmatprotec.2013.09.022 ↗
47. A new approach for ductile fracture prediction on al 2024-t351 alloy
48. Numerical failure analysis of steel sheets using a localization enhanced element and a stress based fracture criterion10.1016/j.ijsolstr.2014.12.010 ↗
49. T. Mura, Micromechanics of defects in solids, 2. rev. ed., Nijhoff, Dordrecht, 1987, ISBN 90-247-3343-X.10.1007/978-94-009-3489-4 ↗