Relating fracture mechanics and fatigue lifetime prediction
Source abstract
Abstract
This article presents how to link together the results of fatigue crack growth tests, analytic fracture mechanics and experimental methods of fatigue lifetime predictions. The study at the beginning investigates the effect of mechanical load redistribution among failed and intact micro-structural bonds along fatigue crack growth to final crack at vulnerable locations in materials and structures under cyclic loads. The microstructural load redistribution model is analytically formulated as a mechanical interaction between fatigue crack growth and fatigue endurance on the macroscopic level. The article in continuation investigates how to link the parameters of fatigue crack growth in fracture mechanics to parameters of fatigue life directly from the work done on crack growth determined by testing. The article at the end illustrates the application of the analytic procedure for fatigue lifetime prediction that combines fracture mechanics and the load redistribution model for determination of S–N curve parameters important in structural analysis and design. In this research the fatigue life time parameters are derived from a single fatigue crack growth experiment instead from normally required sets of fatigue tests for different loading conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical Behavior of Composites · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
2. A generalized Paris' low for fatigue crack growth10.1016/j.jmps.2006.01.007 ↗
3. Damage mechanics and Paris regime in fatigue life assessment of metals10.1016/j.ijpvp.2013.01.005 ↗
4. Analysis of stress and strains near the end of a crack traversing a plate10.1115/1.4011547 ↗
5. A consideration on evaluation of fatigue-crack propagation rate from effective stress intensity factor range10.1520/JTE10404J ↗
6. Effects of different load schemes on the fatigue crack growth rate
7. The influence of initial crack length on critical stress intensity factor K-110.1520/JTE12660 ↗
8. Stress intensity factor range and propagation mode of surface cracks under rolling-sliding contact10.1016/S0167-8442(03)00034-X ↗
9. An engineering model of fatigue crack growth under variable amplitude loading10.1016/j.ijfatigue.2007.03.004 ↗
10. Influence of the cold-drawing process on fatigue crack growth of a V-notched round bar10.1016/j.ijfatigue.2009.12.014 ↗
11. Minimization and quantification of error associated with the K-gradient and the interval of crack length measurement in fatigue crack-growth testing10.1520/JTE11752J ↗
12. Assessment of stress intensity factors for load-carrying fillet welded cruciform joints using a digital camera10.1016/j.ijfatigue.2008.01.017 ↗
13. Slepian · 2002
14. Fatigue yield10.1016/j.ijfatigue.2008.11.014 ↗
15. Stress–strain interaction model of plasticity
16. Modeling of worsening
17. Cause-and-effect interactions in natural sciences
18. Standard test method for measurements of fatigue crack growth rates
19. The exponential law of endurance tests
20. Fatigue life prediction without cycle counting (by means of the integral method)
21. Energy criteria of multiaxial fatigue failure10.1046/j.1460-2695.1999.00220.x ↗
22. Fatigue faulure crierion based on strain energy density
23. A fatigue crack propagation model10.1016/0013-7944(84)90079-1 ↗
24. A cumulative damage theory for fatigue crack initiation and propagation10.1016/0142-1123(84)90017-3 ↗
25. F. Ellyn, D. Kujawski, Plastic strain energy in fatigue failure, Journal of Pressure Vessel Technology 11/1984; 106(4). DOI:10.1115/1.3264362 · 0.36 Impact Factor10.1115/1.3264362 ↗
26. A unified approach to mean stress effect on fatigue threshold conditions10.1016/0142-1123(95)95888-N ↗
27. Effect of mean stress and ratcheting strain on fatigue life of materials10.1016/0142-1123(96)00088-6 ↗
28. On energy interpretations of the Neuber's rule10.1016/j.tafmec.2014.07.007 ↗
29. Local strain energy approach applied to fatigue analysis of welded rectangular hollow section joints10.1504/IJMPT.2007.013111 ↗
30. Energy density theory for cumulative fatigue damage10.1115/1.3265565 ↗
31. Fatigue strength of Al7075 notched plates based on the local SED averaged over a control volume10.1007/s11433-013-5275-2 ↗
32. Averaged strain energy density and J-integral for U- and blunt V-shaped notches under torsion10.1007/s10704-014-9953-5 ↗
33. Analytical expressions for the notch stress intensity factors of periodic V-notches under tension by using the strain energy density approach10.1177/0309324713487902 ↗
34. A Strain energy-based evaluations of plastic notch stress intensity factors at pointed V-notches under tensio10.1016/j.engfracmech.2011.07.005 ↗
35. Comprehensive data for rapid calculation of notch stress intensity factors in U-notched Brazilian disc specimen under tensile-shear loading10.1016/j.msea.2012.02.014 ↗
36. Fatigue fracture criteria and microstructures of magnesium alloy plates10.1016/j.msea.2007.10.034 ↗
37. A new energy-based fatigue damage parameter in life prediction of high-temperature structural materials10.1016/j.msea.2008.07.035 ↗
38. A simple life prediction method for 304L stainless steel structures under fatigue-dominated thermo-mechanical fatigue loadings10.1016/j.msea.2011.09.045 ↗
39. Fatigue characterization and modeling of 30CrNiMo8HH under multiaxial loading10.1016/j.msea.2010.11.075 ↗
40. Deformation-induced martensitic transformation in metastable austenitic steels10.1016/j.msea.2006.09.140 ↗
41. Temperature effect on the low-cycle fatigue behavior of type 316L stainless steel: Cyclic non-stabilization and an invariable fatigue parameter
42. ASTM E739-91 · 2004
43. Assessment of fatigue life and crack growth resistance of friction stir welded AISI 409M ferritic stainless steel joints10.1016/j.msea.2012.01.071 ↗