journal article·2007-04

Creep behavior of austenitic stainless steel weld metals as a function of ferrite content

Y. Cui, Carl D. Lundin

Publisher page

Abstract

Abstract Four types of modified and commercial E308H and E316H weld deposits with Ferrite Number (FN) in the range of 0–5.7 were investigated for creep behavior at stress levels between 70 and 240 MPa, with a range of temperature 550–700 °C. After creep testing, sigma phase was found in commercial E308H and E316H creep samples, significant carbide evolution from modified E308H and E316H with 0 FN creep samples distribute in a random and a chain along the substructures and grain boundaries, respectively. The creep results show that, for E316H weld deposits, modified samples with 0 FN, even though containing microfissures, have a higher creep strength than the fissure-free commercial samples with a higher ferrite content. This can be attributed to the beneficial effect from the carbides on dislocation barriers and the detrimental effect on hard and brittle sigma formed in commercial E316H. Fissure-containing modified E308H has a lower creep strength than fissure-free commercial sample because of the propagation paths provided by fissures and the minimal effect on the randomly distributed carbides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Davis · 1996
2. Borland · Br. Weld. J. · 1960 · 8 · 22
3. Bake · Br. Weld. J. · 1968 · 15 · 283
4. Baker · Met. Construct. Br. Weld. J. · 1969 · 1 · 1
5. Rirrer · Metall. Trans. A · 1986 · 17A · 727
6. Thielsch · Weld. Eng. · 1967 · 52 · 80
7. Gooch · Met. Construct. · 1970 · 9 · 375
8. Lundin · Weld. J. · 1976 · 55 · 356s
9. Lundin · Weld. J. · 1980 · 8 · 226s
10. Nakkalil · Metall. Trans. A · 1993 · 24A · 116910.1007/BF02657248 ↗
11. Lundin · Weld. J. · 1985 · 64 · 113s
12. Hull · Weld. J. · 1967 · 46 · 339s
13. Lundin · Weld. J. · 1975 · 54 · 241s
14. Schaeffler · Met. Prog. · 1949 · 56 · 680
15. DeLog · Weld. J. · 1974 · 53 · 273s
16. Kotecki · Weld. J. · 1992 · 71 · 171s
17. Vitek · Weld. J. · 2003 · 82 · 10s
18. Lundin · Weld. J. · 1976 · 55 · 145s
19. L. Patel, The effect of carbon on the formation of sigma phase in austenitic stainless steel, Master Thesis, The University of Tennessee, 1981, p. 81.
20. ASTM Designation: E963-95, Standard Practice for Electrolytic Extraction of Phase from Ni and Ni–Fe Base Superalloys Using a Hydrochloric-Mehanol Electrolyte.