journal article·2008-10

The influence of sulphur content on the static recrystallisation of cold worked low carbon aluminium-killed strip steels

C.W. Siyasiya, W.E. Stumpf

Materials Science and Engineering: A· Volume 494· Issue 1-2
Publisher page

Abstract

The static recrystallisation (SRX) after cold work was studied in four low carbon Al-killed steels with varying sulphur content ranging from 2 to 140 ppm. The sulphur had an indirect but significant effect on the SRX behaviour by the presence of coarse MnS particles on which the AlN precipitated heterogeneously during coiling after hot rolling. The mean size of the AlN/MnS compound particles was generally too coarse to be effective for Zener-pinning of moving boundaries during recrystallisation thereby rendering the AlN ineffective in influencing the SRX process. In the low sulphur content steels, however, with virtually no MnS present, very fine AlN nucleated homogeneously in the matrix or heterogeneously on grain boundaries or dislocations during coiling, with size often less than 30 nm in diameter. These AlN particles were more effective in Zener-pinning of dislocations and moving recrystallisation fronts, thereby retarding the start of SRX by up to 100 times at low coiling temperatures of about 600 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Ushioda · Nippon Kinzoku Gakkaishi J. Japan Inst. Metals · 1995 · Vol. 59 · 37310.2320/jinstmet1952.59.4_373 ↗
2. Technology of continuously annealed cold rolled sheet steel
3. de Souza · Mater. Sci. Eng. A · 2003 · 354 · 21210.1016/S0921-5093(03)00010-8 ↗
4. Mizui · 1992 · 247
5. Verdoorn · 2004
6. C.W. Siyasiya, PhD. Thesis, University of Pretoria, March 2007, http://upetd.up.ac.za/thesis/available/etd-04302008-160842/.
7. Ogawa · Trans. ISIJ · 1972 · 12 · 29110.2355/isijinternational1966.12.291 ↗
8. C. Zener, quoted in H. Gleiter, B. Chalmers, High Angle Grain Boundaries, Publ. Pergamon Press, Oxford, 1972.
9. Maryhofer · Berg. Hüttenmänn Monatsh. · 1975 · 120 · 312
10. J.E. Bailey, Ph.D. Dissertation, University of Cambridge, 1959.
11. Beck · J. Appl. Phys. · 1950 · 21 · 15010.1063/1.1699614 ↗
12. Bailey · Proc. Roy. Soc. A · 1962 · 267 · 1110.1098/rspa.1962.0080 ↗
13. Stüwe · Mater. Sci. Eng. A · 2002 · 333 · 36110.1016/S0921-5093(01)01860-3 ↗
14. Messager · Comptes Renus Acad. Sc. · 1960 · 251 · 88
15. Chan · Acta Metall. · 1984 · 32 · 23510.1016/0001-6160(84)90052-X ↗
16. Sennour · Acta Mater. · 2003 · 51 · 94310.1016/S1359-6454(02)00498-6 ↗
17. 1981 · B119
18. Jeffrey · Acta Crystallogr. · 1963 · 16 · 55910.1107/S0365110X63001468 ↗
19. Corti · Int. Met. Rev. · 1974 · 19 · 7710.1179/095066074790137088 ↗
20. A.P. Bentley, T. von Moltke, IMMRI Report No. 25, 30th October 2001, University of Pretoria, South Africa, not published.