journal article·2004-02

Effect of static pre-loading on fracture toughness of Nicalon® fibre glass matrix composite

I. Dlouhy, Z. Chlup, K.K. Chawla, R. Kulkarni, M. Koopman, A.R. Boccaccini

Materials Science and Engineering: A· Volume 367· Issue 1-2
Publisher page

Abstract

Abstract Static fatigue of commercially available unidirectional SiC-fibre reinforced glass matrix composite has been followed by measuring the fracture toughness of samples statically pre-loaded at different stresses and times. Pre-load levels were just below the loads corresponding to fracture strength, the (bending) pre-stress being on level 300, 310 and 315 MPa. Three hold times, 25, 50 and 75 h, were applied at each of the stresses. For fracture toughness ( K Ic ) determination, a chevron-notch (CN) three-point bend test was applied. The method has been found to be useful to accurately detect and quantify very subtle microdamage on fibre/matrix interfaces caused by static pre-stressing. Despite of the high scatter of the measured K Ic values, a decrease in fracture toughness with increasing pre-stress and hold time has been found. A parameter is proposed that may be used to quantify the cumulative and combined effect of pre-stress and hold time on fracture toughness of composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. R.L. Lehman, in: R.L. Lehman, S.K. El-Rahaiby, J.B. Wachtman (Eds.), Handbook on Continuous Fibre-Reinforced Ceramic Matrix Composites, Purdue University Press, West Lafayette, USA, 1995, pp. 527–545.
2. Vicens · Aerospace Sci. Technol. · 2003 · 7 · 13510.1016/S1270-9638(02)01178-1 ↗
3. Boccaccini · J. Ceram. Soc. Jpn. · 2001 · 109 · 9910.2109/jcersj.109.1271_S99 ↗
4. K.K. Chawla, Ceramic Matrix Composites, second ed., Kluwer Academic Publishers, Boston, 2003.10.1007/978-1-4615-1029-1 ↗
5. T. Akatsu, E. Yasuda, M. Sakai, in: R.C. Bradt, D. Munz, M. Sakai, V.Za. Chevchenko, K.W. White (Eds.), Fracture Mechanics of Ceramics, vol. 11, Plenum Press, New York, 1996, pp. 245–260.
6. Thouless · Acta Metall. · 1988 · 36 · 51710.1016/0001-6160(88)90083-1 ↗
7. Withey · Mater. Sci. Technol. · 1992 · 8 · 80510.1179/mst.1992.8.9.805 ↗
8. A. Ghosh, M.G. Jenkins, K.W. White, in: V.J. Tennery (Ed.), Ceramic Materials & Components for Engines, Elsevier Science, 1989, p. 592.
9. Dlouhý · Met. Mater. · 1994 · 32 · 3
10. Dlouhý · Fatigue Fract. Eng. Mater. Struct. · 1997 · 20 · 123510.1111/j.1460-2695.1997.tb01484.x ↗
11. Boccaccini · Mater. Chem. Phys. · 1998 · 53 · 15510.1016/S0254-0584(97)02075-0 ↗
12. Brennan · J. Mater. Sci. · 1982 · 17 · 237110.1007/BF00543747 ↗
13. Mecholsky · Ceram. Bull. · 1986 · 65 · 315
14. I. Dlouhý, M. Reinisch, A.R. Boccaccini, in: B.R.C.D. Munz, M. Sakai, V.Za. Chevchenko, K.W. White (Eds.), Fracture Mechanics of Ceramics, vol. 13, Kluwer Academic Publishers, Dordrecht, 2003, p. 203.10.1007/978-1-4757-4019-6_16 ↗
15. Boccaccini · Mater. Sci. Eng. · 2001 · A308 · 11110.1016/S0921-5093(00)01984-5 ↗
16. Ha · Mater. Sci. Eng. · 1995 · A203 · 1271
17. Processing, structure, and properties of mullite fiber/mullite matrix composites10.1016/0955-2219(95)00136-0 ↗
18. K.K. Chawla, Fibrous Materials, Cambridge University Press, Cambridge, UK, 1999, p. 164.
19. Pannhorst · Ceram. Eng. Sci. Proc. · 1990 · 11 · 94710.1002/9780470313008.ch29 ↗
20. Bluhm · Eng. Fract. Mech. · 1975 · 7 · 59310.1016/0013-7944(75)90059-4 ↗
21. Dlouhý · Scr. Mater. · 2001 · 44 · 53110.1016/S1359-6462(00)00601-1 ↗
22. Evans · J. Mater. Sci. · 1994 · 29 · 385710.1007/BF00355946 ↗
23. Boccaccini · Mater. Sci. Eng. · 2003 · A347 · 10210.1016/S0921-5093(02)00612-3 ↗