journal article·2018-02

Crystallographic characterization of the middle shelf in a two-step ductile to brittle transition for a ferrite + pearlite structure steel sheet

Hiroyuki Kawata, Osamu Umezawa

Publisher page

Abstract

Abstract The middle shelf (MS) exhibits medium absorbed energy during a two-step ductile to brittle transition and appears clearly in a ferrite + pearlite steel sheet. The analysis involved using the electron backscattered diffraction technique and indicated that the traces of fracture surface and secondary cracks at MS and lower shelf (LS) correspond to low index crystallographic planes in bcc iron. Although the {001} cleavage plane in the ferrite grain is dominant for the fracture propagation path at LS, the traces at MS correspond to {001}, {112}, and {011} planes. The potential of fracture in the {001} plane at MS (i.e., the number of traces normalized by the number of equivalent planes) exceeds that in the {112} plane. However, the difference between the same is significantly lower than that at LS. Furthermore, the{112} and {011} planes are typical slip planes in bcc iron. This suggests that the fracture at MS propagates on the {001} plane with cleavage fracture as well as on the {112} and {011} planes with a slipping-off mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Two step ductile to brittle transition behavior on ferrite + pearlite structure steel sheet10.2355/isijinternational.ISIJINT-2017-026 ↗
2. Brittle-to-ductile transitions and its relation to the deformability of cementite in fully pearlitic steels10.1016/j.msea.2014.06.007 ↗
3. On the ductile to brittle transition in martensitic stainless steels—Mechanisms, models and structural implications10.1016/0022-3115(94)90032-9 ↗
4. The effect of size, crack depth and strain rate on fracture toughness-temperature curves of a low activation martensitic stainless steel10.1016/0022-3115(95)00188-3 ↗
5. Anderson · 2005
6. Modeling ductile to brittle fracture transitionin steels—micromechanical and physical challenges10.1007/s10704-008-9232-4 ↗
7. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
8. Application of electron backscatter diffraction to the study of phase transformations10.1179/174328007X160254 ↗
9. Use of EBSD technique to examine microstructure and cracking in a bainitic steel10.1016/S1359-6462(98)00170-5 ↗
10. Electron backscattered diffraction study of cleavage fracture in pure iron10.1016/j.msea.2005.10.066 ↗
11. Microstructure and cleavage in lath martensitic steels10.1088/1468-6996/14/1/014208 ↗
12. Quantitative characterization of cleavage and hydrogen-assisted quasi-cleavage fracture surfaces with the use of confocal laser scanning microscopy10.1016/j.msea.2016.04.023 ↗
13. Crystallography of brittle fracture and deformation twinning in ferritic steels10.1179/174328405X67003 ↗
14. Electron backscattering diffraction analysis of secondary cleavage cracks in a reactor pressure vessel steel10.1016/S1044-5803(02)00360-1 ↗
15. Application of combined EBSD and 3D-SEM technique on crystallographic facet analysis of steel at low temperature10.1111/jmi.12041 ↗
16. Cleavage planes in lath type bainite and martensite10.1007/BF02658424 ↗
17. EBSD characterization of secondary microcracks in the heat affected zone of a X100 pipeline steel weld joint10.1007/s10704-015-0024-3 ↗
18. Morphology, crystallography, and crack paths of tempered lath martensite in a medium-carbon low-alloy steel10.1016/j.msea.2016.05.041 ↗
19. Quasi-cleavage fracture planes in spheroidized A533B steel10.1111/j.1365-2818.2007.01808.x ↗
20. The limits of strength and toughness in steel10.2355/isijinternational.41.599 ↗
21. Cleavage-like fracture at low temperatures in an 18Mn-18Cr-0.5N Austenitic steel10.2355/isijinternational.30.656 ↗
22. Mechanism of low temperature brittle fracture in high nitrogen bearing austenitic steels10.1016/S1359-6454(97)00350-9 ↗
23. Cleavage-like fracture along slip planes in Fe-18Cr-3Ni-13Mn-0.37N austenitic stainless steel at liquid helium temperature10.1007/BF02674040 ↗
24. Three-dimensional characterization of slipping-off fracture surface in a 1 mass%N bearing austenitic stainless steel10.2320/jinstmet.73.283 ↗
25. Unusual strain rate dependence of low temperature fracture behavior in high nitrogen bearing austenitic steels10.1016/S1359-6454(98)00005-6 ↗